Using IFRS Starter kit to build a quick POC for Client

Hello Friends,
As IFRS starter kit comes with a packaged solution, I was planning to use the same to build a quick POC for the client. However, I am seeing issues with basic functions like Data Loads. I updated the Dimensions members with the client specific data. I am getting error mainly with the Interco dimension. For some reason, when I tried to process this dimension, it kept waiting for server response indefinitely. I see this problem only with this dimension. In this context, I have the following questions:
1. Can the starter kit be used with custom data?
2. If so, is there any better way to overcome these issues?
Please advise.
Regards,
Ven

Hi,
The kit can be definitely be used with customer data. The functionality doesnt depend on what data you have. Rather, it depends on how the configuration has been done. There is definitely something wrong in the IntCo dimension, because of which it might be getting stuck. I believe its just getting stuck. Can you try to maintain only few members in the dimension and then try again? Are you able to process all the other dimensions?

Similar Messages

"Invalid column name" when restoring SAP DM IFRS Starter Kit

I want to share an issue that we came across when restoring the SAP Disclosure Management IFRS Starter Kit. Namely when trying to restore it on an environment we got the following error:
Server Error in '/' Application.
Invalid column name 'AccountExpirationDate'.
Invalid column name 'PasswordChangedDate'.
Invalid column name 'LastSuccessfulLoginDate'.
In our case, after getting this error we tried restoring the SK on SAP Disclosure Management SP06 and it turned out to work ok so hope that this solves it for anyone else stuck at the same

Hi Rajneesh,
Check whether you have both the row-axis and column-axis of the input template through 'edit report'.
Probably your input template has some member dimensions missing in your template.
We have faced the same problem before and corrected it.
This error occurs sometimes when we create a input template by clearing defining the row & column axis in the template but afterwards try some EPMOlapmember in any axis by deleting the original report elements.
So check the input template once again. I think you will track the error.
Regards,
Bishwajit

Blogg RFC scenario using BPM - starter kit (more detail on BPM required)

I follow this blog to the letter - because it is the same as my scenario:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.

Hi Lynn!!
Check this SAP help for certain requirements when to use BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
Take a look at this blog by Michal,
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
Check this weblog for a step by step procedure:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
or case study go thru this blog:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
for checklist:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
/people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
Thanks !!
Pls reward if useful

DATA TRANSLATION FROM GAAP TO IFRS USING BFC STARTER KIT

Dear All,
1.Does the Starter Pack provide data translation from GAAP to IFRS especially when the underlying GL is a non-SAP GL?
2.What are the specific u201CAutomated controls, business rules and calculationsu201D that are performed in the starter kit as stated in the presentation?
3.For banks not using SAP ERP, what combination of SAP solution will you advise that they take and why, if they must beat the January 1, 2012 deadline.
4. Where SAP GL is in place, what relevance will the IFRS Starter pack provide?
5. Can't I just build a universe in BOBJ to do the data translation from GAAP to IFRS and display the report in the IFRS format?
Thanks for your advice

Hi and sorry for the late answer.
You may find answers to your questions in the paper about "IFRS adoption in consolidated statements with BOFC".[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30effe30-6c44-2d10-c48a-fb26102b0bf6]
Be aware that BOFC is a consolidation product, it doesn't cover the same areas as the GL.
Regards
JF
Would you need further information, or real-time update on all new IFRS/XBRL assets for SAP BusinessObjects solutions I would recommend you join the following social media:
- Facebook http://www.facebook.com/sapifrs
- Twitter http://twitter.com/SAP_IFRS_XBRL
- LinkedIn http://www.linkedin.com/groups?mostPopular=&gid=1851849

Error while installing IFRS Starter Kit in BO FC

Hi Experts,
We are trying to install Starter Kit for IFRS SP1 in BO FC version 7.5. We are following the steps in the installation guide.
However while running the SCAN task, we encounter an error : "Processing task SCAN - (error) ". The log shows that
the packets are extracted, but it is not able to generate the receive tasks. What is the possible cause of this error?
The product information of FC shows that "Build : 7.5.0.1021". How to find the service pack that is installed?
Thanks in advance.
Regards,
Shoba

Ok,
The problem is the following : You can only install IFRS packages in a non signed database. Yours is signed as 0000.TOP so it will not work. Even if the goal is to have IFRS packages installed + 0000.TOP signature.
You should do the following :
1. Create a new empty database.
2. Create a new Finance Datasource in CtAdmin.msc which point to the new DB
3. Initialize it as a CHILD DB (All task / Migrate).
4. Connect to the application with ADMIN account and verify that the DB signature is empty (if it's not the case, you will have to switch SQL initialization querries back to child behaviour and restart from step 1).
5. Copy IFRS packages and configure the transfer vector (folder destination).
6. Create and execute the SCAN task
7. Execute each reception task
8. Change DB Signature from 0000.ROLL-OUT to 0000.TOP (SQL querries are documented in the IFRS installation guide).
Good luck

RFC Scenario using BPM -- Starter Kit

Krishna,
I awarded points for my last line of questioning for 2 reasons.
1) I think you're right about the Pipline URL
2) I appreciate your help
Where can I find my pipline URL?
I looked in the profile directory and found one of the files with: icm/server_port_0 = PROT=HTTP,PORT=80$$.
That's telling me 8000.... right?
Also... which ICF server will I probably have to restart?
Doug -

Hi,
Yeah..profile looks fine. After changing pipeline url, did you test the scenario?
If not check it once.
Regd. http service, you have checked correct one..anyway for this you can refer this configuration guide- section 8.1 if required- to know more
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Anyway first test it , hope it works.
Regards,
moorthy

Extra empty groupName in TDMS file when using DAQmx Start New File & stop DAQmx while waiting for trigger?

I wrote a VI that listens to an external trigger coming from a PFI line and saves a user-defined number of pretrigger+posttrigger samples into disk, and then the DAQmx restarts to wait for the next trigger. I used the DAQmx Start New File.vi to change the filename of each of the next file. However, I found that for each of the resulting TDMS files, there is an additional group that is added in addition to the real data. For example, if the groupName is set to "task_voltage", then there is an additional groupName called "task_voltage #1".
I suspect that this is because the program preallocate diskspace using the old filename for the pretriggered samples, but when the trigger happens and the samples are ready to be written into disk, an actual new file is opened and saved. The reason I think this might be the case is because, say each file would be 50kB and I already have 1 file triggered and saved, before the second trigger comes in, I can see that the file size of the first file is twice as much as it should be (100kB), but the file size will return to noraml (50kB) after the second trigger happens and a second file is created.
Does anyone know if this is really the case? Is there a way to configure the task so that this doesn't happen?
Another question I have is that the program currently set up so that the VI will wait until a trigger happens to return the values. However, this means that if a trigger doesn't happen, the VI waits indefintely, and the "stop" button in the while loop is useless. I have to use the "Abort Execustion" button on the tool bar to stop the VI. Is there a way to interrupt and stop the DAQmx task even if the trigger doesn't happen?
Thanks in advance for any help!
Attachments:
pretrigger_loop_new_file.vi ‏29 KB

I don't believe there is a way to programmatically change/delete the group name in a TDMS file. What you can do however, is convert between TDMS and TDM using the VIs found in the Data Storage palette and then perform whatever modifications you need using the TDM utilities.
Applications/Systems/Test
National Instruments | AWR Group

How do I use the Certificate Assistant to set up secure email for clients

I was at first thrilled to find the Certificate Assistant, and now I'm frustrated. I need to have secure, encrypted email for my psychotherapy clients. I thought that if I created my own certificate authority and then issued certificates to my clients, I would be fine. But I can't get this to work. I set up my own authority, but when I try to get a certificate (using a different email account) I can't get it to work. For example, I go to the website created on mac.com and click the "download an invitation" button and then click the download, which opens the Assistant. I fill out the form, but I get an error saying I haven't configured an email account. How do I "configure" an email account? I mean, I use this account all the time; what more configuration does it need?
Second question. Will anybody with a Windows machine be able to use that webpage? Seems like it's a mac only program, so what good is it in the real world?
I know I could try to do this with Thawte or whatever, but asking my clients to get trusted so I can use encryption is unreasonable. If not having my own authority (if I could get THAT to work) is there any other way? Are there any good things to read about this? With the federal HIPAA privacy requirements, there are lots of doctors wrestling with this question.

If you are referring to your "iCloud account", then simply tap "settings / iCloud" - delete the account you are currently logged in with, and add the correct one.
iCloud Set up - http://www.apple.com/ca/icloud/setup/.

Fail to install starter kit for IFRS in BFC

Hi
I am trying to install the starter kit for IFRS in BFC following the installation guide step by step.
But during the installation i receive an error message.
the steps that i followed are:
i started the data source in exclusive mode
i configured the network from the transfer vectors selection
i created a scan task
i executed the started kit for IFRS.exe selecting the appropriate folder.
Now when i am trying to run the scan task that i have created i don't receive any new tasks
and in the log file i am viewing the following errors:
Archive processing 20081006@162115
Error when scanning the C:\......\business object\........
and if i click on the error the follow message appears
the 0000.CUSTOMIZE address of the archive is different from the current site 0000.TOP
the same error message is repeated again and again for each archive.
i need some help to install the starter kit for IFRS
Thanks in advance
Stavros

Thank you very much for your valuable help.
Following your instructions I manage to set up the IFRS Kit. Unfortunately there is not specify anywhere in the manual that the first database must set up as child and not as top.
Reading much of the documents coming with the version I am using, there is nowhere analyze what is the top or child script and what exactly that script is helping it.
Because I am quite new for BFC there is any manual or somewhere I can find what exactly are the differences for child and top?
Have in mind that I will have couple of installations that they are going to report their own data by having topical databases and from the installation manual the Head office database should be set as TOP.
Thanks again for your help.
Best regards
Stavros
P.S Sorry for posting this question in a wrong forum

Appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?

appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?

Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.

Load transaction data from ECC to BPC 10.1 using US GAAP starter kit SP3

I need to understand a bit more the process to load transactional data into BPC 10.1. We have US GAAP Starter Kit SP 3. Below is an screenshot from the config guide:
It explains how transactional data can be extracted from ECC system to the SAP Netweaver BW data source 0FI_GL_10 and then transform it
to get it loaded into BPC. The Objects /PKG/FC_C01 and PKG/FC_DS01 are just mentioned here as reference because they come in the RDS for Financial Close and Disclosure Management, which not all companies have.
I believe the upwards data flow should be from Data Source 0FI_GL_10 to Data Store Object 0FIGL_O10 and then to InfoCube 0FIGL_R10. There is also a data flow that goes from 0FI_FL_10 to InfoCube 0FIGL_R10. Can anyone with experience with US GAAP starter kit answer this?
Thank you.

Hello, we were able to load actuals to our environment with the US GAAP Starter Kit, SP03. I followed the Operating Guide document up to section 5.2 and ran the Consolidation Data Manager Package with no issue. We are using the A20 Input and A20 Consolidation process flows based on flows F00, F10, F20, F30, F99, etc... According to the documentation, the Statemnet of Cash Flow and Changes in Equity should be automatically calculated and available from the changes
in Balance Sheet accounts once Consolidation is completed . However, when I ran the corresponding reports, they bring no data.
We loaded actual data for the whole 2013 and Jan 2014. Our intention is
to run the first consolidation for Jan 2014. The closing balance for period 12.2013 in flow 99 was copied to flow 00 2014 (opening balance). Flows 20 and 30 were updated with the corresponding balance sheet movements (increase/decrease), according to the delivered controls in the starter kit. However, cash flow is still showing no results.
I found the following text in the operating guide, but I am not clear if I am missing a step. Can you please clarify? This is telling me that I need to copy my 01.2014 opening balance (F00) to 12.2013 closing balance (F99, which is done by the copy opening data manager package, but in the opposite direction, from Y-1 F00 to Y F99) and in addition to also copy that balance to 12.2013 F00 (previous year opening balance)??
"5.2.2 First Consolidation
When operating the consolidation for a given Scope for the first time in the application, it is necessary to populate and process the prior year-end time period for this Scope, in addition to the first required consolidation period. This is because the flows dedicated to the scope change analysis are properly populated by the consolidation engine provided that at least one automatic journal entry has been detected in the consolidation used as opening consolidation, which by default is the prior year end (December, Y-1). To accomplish this, it is recommended that you copy all input-level opening data of the first required consolidation (flow “F00”) into the closing data (“F99”) and opening data (“F00”) of the prior year-end time period, including intercompany breakdowns.
This breakdown by intercompany in the balance sheet triggers automatic eliminations, which are carried over to the closing position. After the consolidation process, the closing data of the prior year
end time period will contain the appropriate source data for the opening data of the following consolidation, notably the opening automatic journal entries.

Need urgent help to use or modify the "ultrasonic starter kit"

Hi, I am a french student, and I am working on an ultrasonic table with Labview 7.1.
On the one hand, I have done the control of the table that moves the "probe?", and on the other hand I have done the program that read the picture given by EPOCH (an ultrasonic system that detects interfaces into metals).
So, now my goal is now to mix them to make a map of those interfaces (one gives the position (x,y) of the probe and the other a graph with intensity peaks).
I have found the "ultrasonic starter kit", and I would like to modify it, but I need help to remove the part that simulates the graph of intensity in order to replace it with mine and to remove the part that simulates (x,y) position to replace it by my positions that are controled in the same order. (y decreases each time x>constant).
In case you would like to help me and need my work or a better description, please contact me to : [email protected]
François-Xavier MAYAUD.
Thank you.

Hi,
I think it would be easier for you to start from a blank VI, than modifiying the example you found which is quite complex. Try to use an intensity graph with inputs as your data.
Regards,
ClémentG

How to view a new website created using Oracle Jump Start Kit

Hi,
I have created a new site .I have added page and template to the site.After publishing it in Oracle Jump Start kit,how do i launch or view the website ??.How do i find the url.For eg;In Oracle JumpStart Kit ,when you click on Launch-Sample Sites ,you can see the links for installed sample sites,but my new website is not shown.Kindly can you help me with launching the website and accessing it in a web browser similiar to how the sample sites are accessed.
Edited by: 1001068 on Apr 18, 2013 10:11 PM

1001068 wrote:
Hi,
I have created a new site .I have added page and template to the site.At this stage are you able to preview the page? If you can't this means your template isn't correct.
After publishing it in Oracle Jump Start kit,how do i launch or view the website ??.You can only publish from one Sites instance to another Sites instance, unless you have used static publishing. Could you elaborate more, do you indeed have two instances?
How do i find the url.For eg;In Oracle JumpStart Kit ,when you click on Launch-Sample Sites ,you can see the links for installed sample sites,but my new website is not shown.Kindly can you help me with launching the website and accessing it in a web browser similiar to how the sample sites are accessed.
The link that provides you the sample sites is actually running the sites in the same JSK instance that you're running. It's similar as you would preview your page in your contributor UI or in a new browser tab. Only in a real world production environment you will access the page from a delivery environment, were you either have implemented friendly urls or you have done a webserver mapping to the dynamic Sites URL.
Edited by: 1001068 on Apr 18, 2013 10:11 PMHope this clarifies your questions.
Cheers,
Rodney

Follow path using IP camera with Starter kit 2.0

I am developing a program to follow path using IP camera with Starter kit 2.0. I faced some problems, someone please help.

thiensung92 wrote:
I am developing a program to follow path using IP camera with Starter kit 2.0. I faced some problems, someone please help.
You "faced some problems"...
Without any further information I assume that your computer is unplugged. All fixed. You are welcome!
Obviously we need a LOT more information. We are not going to waste our time guessing when we could be helping others.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Possible to use an icon other than the default when building a distribution executable for a third party customer ?

I build stand-alone exe's for customers, and would like to know if in the "Build Distribution Kit" dialog there is an option for using a non-standard icon? If not, what else will work...? Thanks.

1. Using windows "START" button,
START->Programs->National Instruments CVI
->Utility Programs->Icon Editor.
2. Double click the icon editor.
Create your ICON.
3. Save your icon by,"FILE" "SAVE AS"
xxxxxx.ico. I suggest you save the
icon in your program folder.
4. Now build a stand alone executable.
CVI will ask for "name" and "path"
of the icon.
5. By dragging the .exe to your desktop
your icon will follow.
6. When you create a distribution kit the
icon will be placed into the kit.
7. After the customer installs the kit
the icon will show up in a small window
they can drag the icon to the disk top
or drag the .exe to the disk top at a
later time.
James Holmes
Trak Microwave Tampa Fl.
(813)884-1411 ext. 247
jhol
[email protected]

Using IFRS Starter kit to build a quick POC for Client

Similar Messages

Maybe you are looking for