Using iMac 24" Display as an HDTV

I have always wondered if this were possible through an add-on of sorts, since the iMac itself doesn't have any built in HDMI-in or DVI-in, or any TV-tuner inputs at all for that matter. But since I do not have the money to purchase both an iMac 24" and an HDTV, I was wondering if there's a way I could use the display on the iMac as an HDTV to watch cable programming and play my Xbox 360 on.
Thanks.
MacBook Mac OS X (10.4.8)

You can use an HDTV tuner like the Elgato EyeTV Hybrid found HERE and that will allow you to view HD content on your iMac.
I do not know if there is a device that will allow you to hook up your 360 and view the games in HD. The only devices I know about use composite or s-video connectors which will not carry an HD signal.
Perhaps someone else can chime in.

Similar Messages

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Can I use iMac as display for new mac mini?

can I hook my early 2008 24" Core 2 Duo iMac to a new Mac Mini to use as a display?
I love the display, but my iMac is getting too slow, even with the maximally upgraded RAM to 4 GB. I don't want to get rid of my iMac, so I was thinking of buying a Mac Mini to attach it.
I'm worried that the OS X Yosemite will make my iMac even slower.
Any suggestions?
Nick

Not without a standalone monitor; that iMac doesn't support video in.
(112620)

Using iMac as display.

Has anyone had any experience with this? I ultimately want to get a PS3 and use my iMac to display it. It runs HD video from eyetv and downloads fine.

I use one of these
http://www.daystartechnology.com/AppleMac_Products/XLR8_Macintosh_Products/Mac_USB2_Video_Transfer_OSXPS.html
but the input is composite (RCA connections) or S-Video. Not sure if that's what you are looking for.

Using iMac as display for my xbox one ?

hi i have a 27-inch, Late 2013 imac and i was wondering if there was a way to use it as display for my xbox one ?

ghaith edrees wrote:
hi i have a 27-inch, Late 2013 imac and i was wondering if there was a way to use it as display for my xbox one ?
Sorry, no.

Can I hook up my Dell Latitude for using iMac as display?

the Dell has VGA & HDMI so I wonder if it will work using a Moshi Mini DisplayPort to HDMI-adapter or similar?

If I understood you, you want to use your iMac as a display for the Dell Latitude.
See > http://support.apple.com/kb/PH11302 27-inch iMacs and iMacs with Thunderbolt ports can be used as a display, and Apple says that this feature works only for other Macs.
That's not exact and that's not the truth because an iMac can be used as a display for PCs, but the PC must have a DisplayPort or a Thunderbolt port. If your PC hasn't got DisplayPort, you can't use the iMac as a display

Use iMac as display from other source

Hi,
I have iMac 27" with thunderbolt connectivity in it. Is it possible to connect an external computer (with or without a converter) to use the iMac's Display? If possible, kindly let me know how.
Thanks & Regards

make sure to get the right converter thou. If you want to connect your ps3 (example) via hdmi, there is a difference between a "minidisplayport to hdmi" and a "hdmi to minidisplayport". If you want to get input via hdmi you will need the "hdmi to minidisplayport" converter.
edit: cmd+f2 on the one you want to use as a monitor.
edit:
http://www.apple.com/thunderbolt/ :
And because Thunderbolt is based on DisplayPort technology, the video standard for high-resolution displays, any Mini DisplayPort display plugs right into the Thunderbolt port. To connect a DisplayPort, DVI, HDMI, or VGA display, just use an existing adapter.
EDIT: after some googleling it seems that X423424X is right.

Using iMac (Target Display Mode) as an External Display for MacBook Air

I have a Mid 2010 iMac with a 2 thunderbolt ports. I now have a brand new MacBook Air (2012 Core i5 1.8GHz with 8GB RAM) with a thunderbolt port. I have a Belkin Mini Displayport Cable to connect the two. I want to use the iMac as an external monitor for the MacBook Air. I cannot seem to get this to work. Can I do this? Do I have the right cable?

You can do it but you need a thunderbolt cable to connect the two. Then just hit CMD F2 on the iMac and it will enter Target Display Mode.

Using iMac as display for Windows 7 (thunderbolt to thunderbolt)

I currently have a 27-inch Mid 2011 iMac running OS X Yosemite, and my company has issued me a Lenovo W540 that is running Windows 7 and has a thunderbolt port (not mini-display -- yes, I'm sure).
I have spend countless hours trying to use my iMac as a display for my laptop, but have had no luck. When I plug the iMac into the laptop, my laptop does recognize my iMac as a "Base System Device", but when I go to the System Information on my iMac it recognizes that a cable is connected, but says there is "No device connected" to my Thunderbolt ports, and attempting Target Display Mode (Cmd + F2) has no effect. So, has anybody ever gotten this to work? Is there a separate set of drivers that I need to install on my Windows laptop to recognize my iMac as a display?
I have done virtually hundreds searches on this, and haven't found anything that relates to my specific case. Is this simply not supported? I appreciate any help that can be provided!

Hello Allan,
I appreciate your response. I have read that a Mac running Windows with Bootcamp can use TDM, so I expected it would be a matter of installing proper drivers, but, unless anybody else has had some success, I think I'm about ready to admit defeat.
I appreciate you proposing a software solution, however, ScreenRecycler only supports using a Windows PC as another display, not the other way around. I did play around with a couple other software solutions, but none of these solutions would work well once my work PC is connected to VPN.
I guess I'll continue to work off a small laptop screen while a giant 27-inch screen on the same desk goes unused. Very frustrating.

Using iMac as display from Mini with Windows 7

Have a Mac Mini with Bootcamp and Windows 7 SP1. When it was intially installed, it was attached to an iMac with a thunderbolt cable and Command-F2 worked to switch the display over. However Windows on the Mini then downloaded and installed all the various patches, and now Command-F2 doesn't do anything. Can anyone shed any light on this?

Hello Allan,
I appreciate your response. I have read that a Mac running Windows with Bootcamp can use TDM, so I expected it would be a matter of installing proper drivers, but, unless anybody else has had some success, I think I'm about ready to admit defeat.
I appreciate you proposing a software solution, however, ScreenRecycler only supports using a Windows PC as another display, not the other way around. I did play around with a couple other software solutions, but none of these solutions would work well once my work PC is connected to VPN.
I guess I'll continue to work off a small laptop screen while a giant 27-inch screen on the same desk goes unused. Very frustrating.

Display port connect to pc using imac as display.

hi guys i recently got the imac 27inch. i would like to know if i connect the display port from my pc to the imac, should i on the power for my imac too ?
as i was told that imac can use as a external monitor as long and connected to a display port form macbook or pc ?
Please help me thank you.

Hi Bryan,
have a look at these informations about the 'Target Display Mode' http://support.apple.com/kb/HT3924
Be aware that to my knowledge there are still problems when using an ATI 5xxx graphics card in your PC as these still seem to be incompatible for the Target Display Mode.
Regards
Stefan

Using iMac as display for laptop PA

I have a work laptop connected to a docking station that I would like to send video over to my 2012 iMac. Is this possible? The docking station has ports for VGA, DVI, and displayport and I need to find out a way to get the image from there to the iMac's mini displayport/thunderbolt.

Some Mac with DisplayPort/Thunderbolt support "Target Display Mode", which allows a Mac to become a dumb monitor for another DisplayPort/Thunderbolt capable computer. Not sure if your Mac supports "Target Display Mode" or not. Also not sure if your PC will send the correct signals to enable that.
<Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support>
You could use Microsoft's Remote Desktop software from your Mac to display the PC's desktop on your Mac (I assume the PC is Windows based).
<https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417?mt=12>
There is a software product called Screen Recycler that may be able to make the Mac into a monitor for the PC
<http://www.screenrecycler.com/ScreenRecycler.html>
Also see: "Air Display"
<http://avatron.com/apps/air-display>

Using iMac as display for Xbox One

I have the latest iMac
http://www.apple.com/uk/imac/specs/
Would there be any way I could connect the new XBox One to the iMac screen and use it as a display?
Here is the rear of the Xbox one, anybody have a idea?
Many thanks
xbox-720-hardware-ports-640x360.jpg

You cannot. Target Display mode only works with other Macs. There are exceptions with Late 2009 and Mid 2010 27-inch iMacs that could be used as an external display for some PCs, but nothing else.
There's an adapter that allows you to connect a Xbox 360 or PlayStation 3 to one of those iMacs and use them as an external display, but it does not work with Thunderbolt iMacs like yours. In conclusion, you cannot use the iMac as an external display for the Xbox One

Hdmi to Thunderbolt cable to use imac as display

Hi
I want to use my Imac (2011) as a display for my gaming PC which has hdmi ports.... Not thunderbolt. If hdmi to thunderbolt isn't possible is there a Pci.
Thanks

You will need an HDMI to MiniDisplayPort converter such as this one:
http://www.kanexlive.com/xd
A simple cable will not work. You'll need to confirm with the manufacturer that the converter will work with your specific model of iMac.
There are no PCI slots in an iMac.
Regards.

Help! Any Way to use iMac's display by PC?

I currently have several PC connected to a 24" monitor. Thinking about jump to iMac 27.
Any way, adapaters, switches.. to connect PC to that beautiful 27". I just don't have space to have two displays on my small desk.
Please help.

The 27" iMac will only work as the display for another device, in Target Display Mode, if the video signal from the other device is a DisplayPort signal. The 27" iMac works best with other new Macs with mini-DisplayPorts. Then you only need a m-DP to m-DP cable to connect the two Macs and the GPU from the other Mac drives the 27" display with its native resolution.
The problems crop up with external devices that do not have any form of DisplayPort, and so do not transmit DP video signaling. You can get converters to convert the signal from some devices to DisplayPort signaling, but this combination does not allow the other device's GPU to power the 27" display directly and folks are often upset that they cannot get the 27" display to use their device's highest resolution.
For example, a new XBox with a converter cannot drive the 27" display at the XBox's native 1920 x 1080 resolution, just 720i, or 1480 x 720. The 27" display's native resolution is 2560 x 1440. 1480 x 720 is half that resolution.
The converters are usually US$149.00. There is a much more expensive device, a video scaler, that can assist your device to power the 27" display in the device's full resolution. They are about US$300.
Dah•veed

Using iMac 24" Display as an HDTV

Similar Messages

Maybe you are looking for