Using iMac as external display on MBP (Lion)

I'm trying to use my 27" iMac as the external monitor for my MBP, both running Lion.  I saw an article (support.apple.com/kb/PH4469; seems to be unavailable now) and said I just need to hit command+F2 once the computers are connected (using thunderbolt to thunderbolt cable). However, Command+F2 doesn't appear to have any effect.
Please advise.
TIA,
David

but I have as of yet not found a straight answer.
I think you are getting the straight answer. You need "buy a display" because a display has a video input port. An iMac has a video output port, but NO video input port. Therefore, you cannot use it as an external display, like a regular display.
You could give the iMac a video input using a USB interface device, but the cost of such a device that would provide good quality video into the iMac would cost about the same as (or more than) a low cost LCD display. And it would probably not be ideal in terms of performance.
You could also use this clever program to use a fast network connection and VNC to display the MacBook Pro's second screen on the iMac screen.
http://www.screenrecycler.com/home.html
In your case, the program will create a virtual screen for the MacBook Pro and shares it with the iMac in much the same way as the +screen sharing+ feature. Disadvantages are relatively slow image refresh rate (because the signal is going over the network) and the need to have the iMac turned on and running separately. The speed part will not be that bad in your case, if you use a Cat-5e or better Ethernet cable to connect the two Macs, so that you will have gigabit speed. You can give it a try at no cost to see if it is an acceptable solution (in time-limited demo mode).
I use this program to give my iMac a third display. The +third display+ is an old PC laptop running Linux (Ubuntu).

Similar Messages

  • Using iMac as external display with MBP, can this be done?

    I know...
    This has been posted before, but I have as of yet not found a straight answer. Mostly peoples recommendation is: "Buy a display".
    However, I have an older iMac, 20" and I have a newer MBP 15". The MBP has a faster graphics card, better processor and more RAM. But I still like sitting at the table using my iMac, because the comfort of working is better this way.
    Now seeing that I have both, is it possible to connect the two, and use the iMac for a display? Preferably without having to buy a whole lot of expensive cables, applications or do strange hacks risking hurting myself or my computers
    Thanks all
    Have a nice day

    but I have as of yet not found a straight answer.
    I think you are getting the straight answer. You need "buy a display" because a display has a video input port. An iMac has a video output port, but NO video input port. Therefore, you cannot use it as an external display, like a regular display.
    You could give the iMac a video input using a USB interface device, but the cost of such a device that would provide good quality video into the iMac would cost about the same as (or more than) a low cost LCD display. And it would probably not be ideal in terms of performance.
    You could also use this clever program to use a fast network connection and VNC to display the MacBook Pro's second screen on the iMac screen.
    http://www.screenrecycler.com/home.html
    In your case, the program will create a virtual screen for the MacBook Pro and shares it with the iMac in much the same way as the +screen sharing+ feature. Disadvantages are relatively slow image refresh rate (because the signal is going over the network) and the need to have the iMac turned on and running separately. The speed part will not be that bad in your case, if you use a Cat-5e or better Ethernet cable to connect the two Macs, so that you will have gigabit speed. You can give it a try at no cost to see if it is an acceptable solution (in time-limited demo mode).
    I use this program to give my iMac a third display. The +third display+ is an old PC laptop running Linux (Ubuntu).

  • Connecting iMac Keyboard to Macbook Pro while using iMac as external display

    I'm trying to using my iMac wireless keyboad for my macbook pro while my iMac is in external display mode but I can't get the keyboad to connect. I've tried disconnecting the wireless keyboard from my iMac but it won't go into target display mode without the keyboad. Can I used my iMac wireless keyboard with my Macbook pro while my iMac is being used as an external display?

    No, not reliably.  If it's paired with both machines you can turn it off and turn it back on but it's a toss up which machine it will connect with.  If you took it to another room so the iMac didn't see it, you'd have to disconnect the minidisplay port/thunderbolt cable and then it would exit target mode display.

  • Using imac as external display for my MacBook

    Can I use the new iMac as an external display for my MacBook?

    Here's the >New iMac Spec's and there is only Mini-DVI output port and "NO" input port.

  • Using iMac as external display from Macbook Pro flickers static and crackles.

    I'm trying to use my iMac as an external display.
    When I plug in my early 2011 Macbook Pro into my Mid 2010 iMac via a Belkin Mini DisplayPort to Mini DisplayPort, the iMac screen flickers with static and there's random crackling noises.
    Weird thing is, when I try the same thing with a new Macbook Air, everything works perfectly!
    Here's a quick video demonstrating what I'm talking about - http://youtu.be/xxTXVRffWwE
    Are the two not compatible or do I just have a defective Macbook Pro? The Macbook Pro works fine with the Cinema Display I have in the office...

    Huh, It should work like this:
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    iMac Model
    Cable Supported
    Port on Source Computer
    iMac (27-inch Late 2009)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    Actually that table seems illogical. The cable supported is mini to mini display but the port says "or Thunderbolt"
    Does that seem contradictory to you?

  • Using iMac as external display, keyboard, mouse

    I would like to use my iMac as an external display, keyboard, and mouse for my windows laptop.  Is there a gizmo that will allow me to do this?
    When I am using my work computer (windows laptop) at home, I prefer to have a full size display, keyboard and mouse and would like to see if I can use my iMac for this purpose.
    21.5” iMac mid-2011

    dwh wrote:
    I would like to use my iMac as an external display, keyboard, and mouse for my windows laptop.  Is there a gizmo that will allow me to do this?
    When I am using my work computer (windows laptop) at home, I prefer to have a full size display, keyboard and mouse and would like to see if I can use my iMac for this purpose.
    21.5” iMac mid-2011
    No, not unless your Windows box has a Thunderbolt output port which it almost certainly does not. Please carefully read Apple's Target Display Mode 2011 Macs that extplains.

  • HT3924 Using iMac as external display for PC.  Question re: Cables

    I have a PC laptop with an HDMI output, but not a mini displayport.  I have a 27" iMac with a mini displayport jack.  If I want to use the iMac as an external monitor for the PC laptop, can I use a mini displayport to HDMI cable?  Or does my laptop need to have a mini displayport jack as well?
    Thanks

    This approach will only work if the OP has a 2009 or 2010 27" iMac. It will not work on any other iMacs. What he is attempting to do is called Target Display Mode, TDM is addressed in these two Apple articles:
    http://support.apple.com/kb/HT3924
    and
    http://support.apple.com/kb/TS3775

  • Can an early 2009 iMac be used as an external display?

    Can an early 2009 (I think the one released in March) iMac be used as an external display? I think the late 2009 one does but not too sure about mine.
    Thanks

    What about this video then?
    http://www.google.com.au/m/url?client=safari&ei=B6UkToG-FY2urAf99LPoAg&hl=en&oe= UTF-8&q=http://www.youtube.com/watch?v%3DGsyDlvnVYmc&ved=0CBYQtwIwAA&usg=AFQjCNG 5nKsKR5tEOGMiTNrAhDRVis0eQw

  • How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    Target Display Mode: Frequently Asked Questions (FAQ)
    with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

  • IMac 24¨External display no longer working

    I have a Intel iMac 24¨using an additional external display - Fujitsu.
    It has worked perfectly since I bought it and suddenly the external display will no longer work. There is nothing wrong with the Fujitsu because I have tested it on other computers but will no longer work with the iMac.
    I have checked all connections, running current update and I am now at a loss as to what to do next.
    I read that there were problems linking external displays when the iMac 24¨came out but I am assuming that this was resolved long ago. Even so, mine has worked fine until now. Any ideas please?!
    Thank you

    Hi Canaryguy
    1. Shut everything off display, computer and disconnect everything.
    2. Reset the iMac's SMC > http://support.apple.com/kb/HT3964
    +● Shut down the computer.+
    +● Unplug the computer's power cord.+
    +● Press and hold the power button for 5 seconds.+
    +● Release the power button.+
    +● Attach the computers power cable.+
    +● Press the power button to turn on the computer.+
    3. Now first reconnect the DVI or VGA cable to the Display.
    4. Then connect the Mini DVI to ??? to the Cable coming from the Display.
    5. Lastly plug the Mini-DVI adapter into the iMac.
    6. Then turn the Display on and startup the iMac.
    If that does not work try a different Mini-DVI to ??? adapter and cable, or test your adapter, cable and display with another iMac.
    If all of the above fail, then the iMac needs to be serviced.
    Dennis

  • Using iMac 2011 to display a PC

    Dose anyone using iMac 2011 to display a PC by Mini displayport to VGA(or DVI) cable!
    I used a Mini displayport to VGA cable and press commead+F2 button, but it was nothing happen.
    that is the cable I've used.
    http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg
    Should I change other cable? or it just can't be work!!
    Tks,

    You cannot use a 2011 iMac in Target Display mode.
    Target Display only works with the 2010 iMac.

  • How could i use my three external Display's as one Big?

    I'have an Mac Book Pro 15,4" and i would use My three external Display's as one!! How can i do that without using an Adapter? The external DIsplay's are Connectet by the two integrated Thunderbolt adapter and one is connected by the integrated HDMI adapter! Wich Application do i need? Or is it not Possible to use the thre external Display's as one?

    Thanks for your Help but i think that what i would to do does not work with Mac! Did you know the Game Crisis 3 i had see an Video on YouTube there ist somwone he use 6 Thunderbolt Display and have a Resulution fromm 4k That is what i want to do with my 3 External Display i know that i couldn't do this resulution with my thre Display's! but i had to say he use BootCamp and Windows 8 with Eyefinity from AMD! And i search an Application where i can do it ! My Driver is from NVidia and i don't find something by the NVida Homepage
    http://www.youtube.com/watch?feature=player_detailpage&v=WmlsePKH6AY

  • Question on Using thunderbolt iMac as external display with a Macbook Air

    If I connect my macbook air to new thunderbolt iMac - can I access peripherals attached to usb, firewire, ethernet like the thunderbolt 27"?
    if so how can i do this?
    thanks!
    Derrick

    Thunderbolt 10.6 Help: Using another Mac as an external display
    Only video and in some scenarios audio is transmitted. Nothing else.
    Stefan

  • Using 2011 iMac as external display for new Retina macbook / port sharing question

    I'd like to see if there is a way to use the firewire port on the back my 2011 iMac 27" when it's connected to my 2014 15" Retina Macbook.
    The two work fine right now - the iMac is the main display for the macbook, but I wanted to know if there is a way to utilize the extra ports - namely the firewire port on the iMac through the Macbook. I've created aggregate devices before - would this be the way to go?
    Thanks!

    Hello gstern1994,
    Yes you can. Form the article below you should be able to do that, just make sure that you plug in those devices when you have already set up the Target Display Mode on the iMac. 
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/en-us/ht3924
    Regards,
    -Norm G.  

  • Possible to use external display with MBP on battery & in clamshell mode

    i can use the extetrnal display with my recently purchased MB Pro - lid is closed and external display works.
    but the moment i try to do this with the power not connected to the MB Pro - MB Pro goes to sleep. i can wake it up with the external keyboard but it goes back to sleep in a minute or two. and this problem goes away if power is connected.
    anybody else face this? has a solution?

    where do i find that option - this is what i have on my machine.
    http://img.skitch.com/20090922-cpmepik2kewnsbm1g851drwryq.jpg
    http://img.skitch.com/20090922-p4s3grein7kgxi3sqbsbm25kfm.jpg
    Message was edited by: msim20

Maybe you are looking for

  • Macbook Pro keeps freezing after replaced the hard drive

    hi there, recently, my macbook pro (15" 2.53 ghz, 4gb ram, 250gb hdd) hard drive crashed, having no warranty left, i went through all of the troubleshooting but nothing worked. i took it into futureshop and they tried the diagnostic and concluded tha

  • Performance Tuning in XI

    Hi experts, Can anybody tell me how to do performance tuning in XI? If any one has document plz give the link. Regards, venky

  • RE: forte-users-digest V1 #322

    Re: "We wish to eliminate any object references to the service object's partition. Any insight would be greatly appreciated." from Van Vuong <[email protected]> This was in regards to copying a set of object from a server to client. An implicit clon

  • Chained Select

    Hi. I have a software to create a chained select form. How do i link this to filter out information (photos and text) on my webpage? Basically i have a vendor directory that consists of images and text. I would like the user to select the "location"

  • Trex Error 4950

    Hi All, I am installed the TREX7.1 sucesufully, after that i ran the script python Runinstallertest.py and it ran succesfully with returncode 000 and allservers are showing ok. I have configured a RFc connection to test system and rfc is working fine