Using Image Processor from Bridge

I'm trying to use the image processor from within Bridge. I have done this several times in the past, as recently as last week.
I have some files selected in Bridge. I select "Tools>Photoshop>Image Processor" and the dialog box opens. Step 1 indicates that I have files to process (10 in this instance), and I have JPEG selected as the file type to process. When I click "Run", I get an error message that says "Script Alert" in the title. The message in the window says "There were no source files that could be opened by Photoshop".
I opened the same 10 files in Photoshop, and I was able to run the Image Processor on them while they were open in Photoshop. I'd rather not do this unless I have to.
I haven't added any new programs or plug ins since the last time I used the Image Processor from Bridge.
I had the same problem in early June, and the solution suggested then fixed the problem. I'm experienceing the same problem today, and the same solution doesn't seem to be working now.
The previous solution was to reset the preferences by holding down the Ctrl key and clicking on the Bridge icon to start. A reset window with 3 options popped up. Now, w
I would sincerely appreciate any help you could give me with this.
Thanks,
Larryhen I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.

Read you original post again and your last post and now I am confused.
You said you reset your Bridge preferences, yet in post #1 you said " I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.
So with this said you have not reset the preferences unless you have gone in and deleted the file. The Bridge Icon is the one one the desktop that you click to start Bridge.
BUT, in last post you say you have a Mac. So to reset preference believe it is Cmd key.
No matter how you do it you need to get the reset window with the 3 reset options.

Similar Messages

Problem using Image Processor from Bridge

I have been using the Image Processor to process photos from Bridge for quite some time. However, I recently received an error message when I try to initiate Image Processor from Bridge and I have not been able to find any help topics that address my problem: I select images in Bridge to process, then click "Tools>Photoshop>Image Processor". Photoshop opens and the familiar Image Processor dialog box opens. Item 1 in the dialog box says "Process files from Bridge only" and has the number of files I have selected in parenteses. I select the file type and other settings in #3, and preferences in #4. When I click "Run", I get an error message window that says: "Script Alert. There were no source files that could be opened by Photoshop". The Image Processor works if I open the files in Photoshop first, then run it by selecting "File>Scripts>Image Processor" and tell it to process all open files.
Would someone be able to help me with this problem?
Thanks, Larry

Usually when it worked before and not now, and you have added no new software or hardware I recommend resetting the preferences. Hold down the Ctrl key and click on the Bridge icon to start. You should get a reset window with 3 options.

CS5 Crashes using Image Processor from Bridge

Photoshop CS5 64 and 32 crashes when using the image processor from Bridge after 200 images or so. Converting 1000 RAW files to PSD or PSD to JPEG takes multiple reloads. any ideas?

I've encountered a non-repeatable variation of this problem from time to time: crash occurs at startup of image processor when Photoshop is open and has been running for some time. (I've not seen the error where Bridge > Image Processor causes launch of Photoshop.) Once I've started a run it has not failed to complete all images (but I'm not converting RAW files and not as many files as 1000). ScriptingSupport.8li is listed in event log problem signature.

Colour washed out when using image processor in Bridge CS6

Hi there
I hope somebody can help please?!
I am editing raw files in Camera Raw 8.2, then using image processor through Bridge CS6 to save them as both jpegs and tiffs.
I am finding the colour on the saved files is coming out a little washed out and faded.
If I open them individually and save them in PS6 as jpeg and tiffs, the colour remains vibrant and true to the original raw file.
I have thousands of these files to go through and don't have time to open each one individually in this way so I am desperate to automate this process while still retaining the great colour in the original shots.
Can anyone tell me why the shots are coming out this way and help offer a solution for me please?
Any advice would be massively appreciated!
Many thanks
Benny P

Hi,
Do you have Include ICC Profile checked at the bottom of the Image Processor dialog?

Color washed out when using image processor in Bridge CC

Hi,
When I use the image processor - Tool>PhotoShopS>Image Processor, via bridge my colors appear wrong and washed out.
When i choose "Include ICC profile" in the process dialog it has no effect - the colors are still wrong.
In PhotoShop my profile is set to ProPhoto RGS, can that be the reason?
When I save as JPG from Photoshop the colors are correct.
any suggestions?

Hi,
Do you have Include ICC Profile checked at the bottom of the Image Processor dialog?

Installed photoshop cc (2014) and lost image processor from Bridge

How do I get back Image Processor from the Tools drop down menu in Bridge? I have uninstalled and reinstalled both Bridge and Photoshop and have no positive results.

I know some modules went kablooey when I uninstalled Photoshop CC 14.x but I fixed it by uninstalling everything and reinstalling.
Maybe try the CC Cleaner Tool?

Image Processor from Bridge CS5

Lately, I have been getting this error message when trying to access the Image Processor (PS CS5)from Bridge CS5: "Sorry something major happened and I can't continue". I called Adobe support and was told that it might be related to third party plugins. The puzzling part is that I have been using all of the above with no problems for over a year . . I am using a Mac Pro, OS 10.6.4, with 10 G of RAM, and have the latest updates to PS and Bridge. Any suggestions?

One way around the problem would be to use a different processor..
There is the New Image Processor Pro and Dr Browns 1-2-3 processor @
http://www.russellbrown.com/tips_tech.html
Also Picture Processor @ http://www.scriptsrus.talktalk.net/index.htm

Image processor from Bridge problem

ONe of most annoying things with Bridge is that often, image processor wont open from Bridge -- unless you quit out and relaunch Bridge -- quite a hassle.

You are absolutely correct. In order to pass selected images in bridge over to photoshop, you need to invoke IP from within Bridge. I didn't make that connection from your earlier post.
So your original request makes sense. Personally, I would rather see an improvement in Image Processor (as well as the Batch dialog) that allowed one to specify the source as "Bridge".
In photoshop 7, in the batch dialog, you could specify the source of the files to be batched as "Open Files", "folder", or "File Browser". If you choose File Browser, the batch action will be performed on files selected within FB.
In CS2, in the batch dialog, you can see Bridge as an option, but it's grayed out. You can only invoke the Batch operation on files selected in Bridge from within Bridge - a serious shortcoming.
The same theme holds true for Image Processor, and indeed, it looks like most of the scripts behave that way.
So rather than have a shortcut, I would like, as I say, the ability to specify bridge as a source in the dialog boxes for the image processor and batch dialogs.

Using image processor from RAW format to JPEG, the images are suddenly very muted colour, greyish tone, and just awful looking.

Any ideas as to why, when I am converting a group of images through image processor into JPEG, the resulting images are AWFUL. I have been using this process for years without a concern, and suddenly the JPEG files are very greyish, muted tones and just terrible looking… HELP! I'm WAY too busy right now to be dealing with this and having to manually save each image to JPEG

Which Color Space are the images in?
What are your Color Settings?

Does anyone recognize the issue that an attempt to use the Photoshop Image Processor from Bridge/Tools opens Photoshop CC 2014 but then redirects to Photoshop CC stating that CC 2014 doesn't support this.

@

Read you original post again and your last post and now I am confused.
You said you reset your Bridge preferences, yet in post #1 you said " I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.
So with this said you have not reset the preferences unless you have gone in and deleted the file. The Bridge Icon is the one one the desktop that you click to start Bridge.
BUT, in last post you say you have a Mac. So to reset preference believe it is Cmd key.
No matter how you do it you need to get the reset window with the 3 reset options.

Batch image processing from bridge cause photoshop to crash

But first it goes ahead and processes the images selected in Bridge. All of them like even over a hundred at a time (great time saver!). Then displays a message for each image in one error dialogue saying, "Sorry Photoshop couldn't process the image. . ." for each image.
It also saves the images to the a folder above (in hierarchy) instead of the folder I select in the batch dialogue. I've tried using Batch process from within Photoshop and get the same result as image process from Bridge.
While I am able to do the processing I need, it's annoying to have the force quit Photoshop each time, and Then to move the processed images where they belong.
I am on a G5, 4mb ram, OSX 10.4.11. Photoshop CS3 #10.0.1, and bridge CS3 # 2.1.1.9.
I usually do the updates when I'm alerted, but haven't heard of anything recently.
Any ideas?

Hi SSPrengel
OK - maybe this will shed some light
Try changing the size to something very small.- see below
Try changing the compression. Not affected by the level of Quality (2% 50% or 100%) - all fail to load
Try changing whether a color-profile is embedded or not. Not an option AFAIK in LR Export
Try changing if the metadata is minimized or not. Not an option AFAIK in LR Export
Try changing if the JPGs are exported relative to the source image or some fixed location. Exported to a specific location.
If I use the Image export resize option it loads OK (resize to 1000*673 from 3916*2634).
Older exports (from LR2.3 and earlier, of the same size image, and source DNG are OK)
A centre crop from the Image (1205*691) is OK. A marginal crop (2 edges) (3838*2552) is OK whereas a very slight crop at (3693*2614) FAILS
The camera is Leica M8, images is in Leica RAW format (DNG).
It appears to be function of Image export size (reduced either by Cropping or by 'Resizing on Export'
Looks like a bug in LR2.6
Message was edited by: V64
PS I am using a G5 PowerMac with Tiger OSX

Droplet to send images to Image Processor from Mac Finder?

Is there a way to create droplet that will just send whatever images you drop on it to the Photoshop Image Processor script?
Basically the same thing that happens when you select images from Bridge and select Image Processor from the Tools > Photoshop menu.
I'd just like a way to do that via drag and drop from the Finder.
Thanks.

No, Bridge can communicate with Photoshop to send a list of the selected files, this can not be done with a droplet

When using image processor my images to select are grayed out

when using image processor my images to select are grayed out, when they wernt yesterday? any clues? Have I done something stupid!
many thanks
carol

Nothing to do with professional or not, but I do hope you know where your computer's power switch is. System information can be obtained this way:
Working with your Operating System’s Tools
Furthermore we need info where you store your files, what format they are in, where they came from, what you did the last time this worked, if possible...
Mylenium

How to Use Image Processor for Multiple Sizes

I'm trying to use Image Processor to work on a folder of images and to create several sizes of .jpg's . I find an option to Save as JPEG in one size only. Is there any way to set up Image Processor to save JPEG to multiple sizes?
Thanks in advance for your help!!!

Hi Mehtap,
Using the script will give you multiple selections.
This is how I did it and it works well. It just separated the values by semicolon ";" .
TEXT_1.setText(DS_1.getFilterText("0CUSTOMER"));
When selected only one value:
When selected more than one value:

Error message when trying to use image processor in CS2

Hi
I am trying to use image processor to condense 500 proofs for my website - however although I have done many times before with no problem, now when I hit the Image processor button before I even get to key in details it is bringing up the sorry something major has happened message and I can't continue - the details of this message are as follows - ref error : this.dlgMain.ddset on Change is not a function :810 - does this mean anything to anyon? Any ideas on how to overcome would be much appreciated.
thanks

Go to Russell Brown's website and download his package for CS2. His 1-2-3 Processor is much more flexible than the one provided by Photoshop.

Using Image Processor from Bridge

Similar Messages

Maybe you are looking for