Using iMovie 9.0.4 cannot zoom in or out on ken burns effect? Only pan

When I am in iMovie I am trying to apply a Ken Burns effect to a portrait style photo, I understand the ratio is different so It will not position the entire photo in the screen unless you choose fit. But when I choos fit I cannot apply a ken burns effect. Is there any way to apply the Ken Burns effect to a fit portrait photo?

You can apply the Ken Burns effect by clicking on "Ken Burns" rather than Fit.
If you would like the Ken Burns to be able to go beyond the boundaries of the photo so you can zoom more, choose "Allow Black".

Similar Messages

Automatic Ken Burns Effect in iMovie HD 6.0

I'm creating a slideshow in iMovie HD 6.0. I've imported about 300 still photos from iPhoto. If you create a slideshow in iPhoto, it applies the Ken Burns effect to all the photos at once. And the effect varies from photo to photo. (It will zoom in, zoom out, move right, move left, etc.) In iMovie HD 6, it appears you have to apply the Ken Burns effect to each photo individually and the only effect I could see was a zoom in.
Similar to iPhoto, if possible in the my iMovie project: I want to apply a Ken Burns effect to all of them at once and (ii) I want the Ken Burns effect to vary from photo to photo.
Possible? How?

The remaining problem (which is the reason I ended up trying to do this in iMovie rather than iPhoto) is that I can't figure out a way to lay down audio tracks that tie to certain slides, fade in and out, etc.
Is there a way to do this in iPhoto that I didn't realize? Or is there a way to do it in iMovie to the imported iPhoto slideshow?
If you want to make these changes to the audio, that editing can be done in iMovie. However, you first should create the Quicktime movie of the slideshow without music. Then import this film into iMovie. You are then able to import your music and do the editing to get the results you want. I have used this method on a project I am currently working on.
I have a question for Rich839. Could you explain what you mean by "Full Quality" Quicktime movie? I want to be sure that I didn't overlook anything.

Ken Burns Effect Portrait Photo iMovie 08

Hello...
I'm trying to make a slideshow of photos in iMovie 08. In an older version of iMovie, I was able to apply the Ken Burns Effect on both landscape and portrait oriented photographs. In iMovie 08, the landscape photos are fine, but i'm having a problem on the portrait oriented ones. The red and green bars in the Ken Burns Effect only select a portion of the portrait oriented photos, so you only see a small section of the photo when using the effect. Please help.
Thanks,
Lauren

The Ken Burns effect in iMovie only pans over the photo pixels. And it only allows rectangles in the same aspect as the screen (landscape).
You can pad black space on the left and right in your photos using an application like Photoshop. so that the Ken Burns will pan over the entire photo
There is also a program called Automator which comes with your Mac. Automator has a "Pad Images" action which will add the black space to vertically oriented photos. With automator, you can batch any number of vertically oriented photos and pad them all at once.

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

Can I turn the Ken Burn Effect off when using the iMovie app on my iPod touch 5th generation?

I have an iPod touch 5th generation and I'm trying to make a movie using the iMovie app. When I put an image on there it moves from side to side and zooms in and out. I believe this is called the "Ken Burn Effect". Is there any way that I can turn the Ken Burn Effect off without having to adjust the image position and zoom level to be the same for the start and end points?

Hello MisfitxCaleb
Unfortunately, the Ken Burns Effect cannot be turned off in iMovie for iOS. Like you mentioned above, having the photo at the same start and end point is the best way to make it appear as if it isn't moving/zooming.

I cannot zoom in or out in a Mozilla window running Adobe Flash.

I cannot zoom out (or in) in a Mozilla window running Adobe Flash. Ctrl+/- , Ctrl up/down and using the mousepad to zoom in or out (I have Win7), and holding Ctrl while scrolling does not work. I cannot zoom out more using Adobe Flash either.
I can change the zoom with windows with menu bars, but this one does not have one.

You can apply the Ken Burns effect by clicking on "Ken Burns" rather than Fit.
If you would like the Ken Burns to be able to go beyond the boundaries of the photo so you can zoom more, choose "Allow Black".

How to manually zoom in using the Ken Burns effect

I love the way the Ken Burns effect zooms in on a photo. But it isn't optimally positioned on my photo. So I want to manually control this effect from start to finish of the duration. I understand how to slide left, right, top or down but its not obvious how to make it zoom in or out from start to finish. Can someone tell me how to do this.
Thanks in advance.
--Mickey

pick the photo in the slide show - click on the settings icon in the tool bar and on this slide - click on start next to Ken Burns at the bottom of the settings window and zoom the photo to the desired size using the zoom in the lower right hand corner and pan to the desired starting point by dragging - click end and do the same for the final position and you have it
LN

GoDaddy Webmail, cannot zoom in or out

I use GoDaddy webmail, and the type is large, and I would like to zoom out, but when I click the zoom out button on the GoDaddy website, it goes to a download desktop tools page (and tries to download a desktop tools app - which I already have and have installed on my computer).
I am able to zoom out fine in Safari and Chrome, so this is an issue with Firefox.

You can apply the Ken Burns effect by clicking on "Ken Burns" rather than Fit.
If you would like the Ken Burns to be able to go beyond the boundaries of the photo so you can zoom more, choose "Allow Black".

I've been using iMovie for a while now to make movies out of mostly travel photos and video clips. I try to vary the time for the photos from 1-4 sec. Any ideas out there?

I've been using iMovie for a while now to make movies out of mostly travel photos and video clips. I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short. A friend of mine who saw my most recent product said that this is too short. Any ideas out there?

I apologize for my confusion on your question. I find that depending on the principal of each photo and my target audience to determine the time frame for each photo. It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
If there are several things that interests the viewers in any one image, they want to look at it a second or two longer. If the movie of images is a training aid, the images may need to be more than 3 seconds. For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
That was a long answer to say, generally speaking, I find 3 seconds to be an average time length.

Video Slideshow Creation in iMovie (Ken Burns Effect)

I'm trying to create a slideshow video in iMovie. The process seemed pretty straight forward, and seemed to be going nicely. I got all the images imported into iMovie and added the music to the timeline as I wanted. When I previewed my results though, I was less than pleased.
After viewing the preview, the Ken Burns effect was the exact same zoom/pan for every picture--it wasn't randomizing the effect like it does when you do a slideshow from within iPhoto or Front Row. Any way to get it to randomize the effect? There's just way to many pictures in this compilation (250+) to go through and change it up a bit for each.
At this point, I figured I'd just go with the slideshow export feature in iPhoto since it does randomize the Burns effect. Yeah, that didn't go so hot either. Apparently, you can only add one music track, so I had to find a utility to combine the MP3s we were going to be using. Looked like this was going to work until we played it after the (LONG!) export process. Turns out, the slideshow somehow ended up a whole four minutes shorter than what I had in iMovie. Apparently the default transition speed of 5 seconds does not hold true to iPhoto slideshows. Plus, much to my surprise there is absolutely no fade-out in the music at the end--it just abrubtly stops. Not cool.
There's got to be a way to make that (very cool) Ken Burns effect randomize in iMovies I'd think. Any suggestions?

Although you cannot permanently remove the Ken Burns effect option, you can set your default to having it off.
You need to apply your settings to a particular photo and then the changes should be the new default.
Drag any photo into the timeline. Select 'show photo settings' and deselect KB effect and update that photo.
Close or hide photo settings. Click on something else. If you don't want the photo in your timeline, delete it.
When you open the 'show photo settings' again, your recent changes should be there.
If this process does not work for you, try deleting iMovie's preference file.
With iMovie closed, go to your Home file(YourUserName)/Library/Preferences/com.apple.imovie.plist
Drag this plist file to the trash. iMovie will create a new one when you reopen it.
Reopen iMovie.

Ken Burns Effects Don't Work in iMovie HD (I've Tried Everything)

Version:
OS X 10.4.10
iMovie 6
*Hardware 1:*
PowerMac G4 Dual 500 Mhz, 1GB RAM, Internal 40GB HDD and Internal 320 GB HDD
*Hardware 2:*
PowerBook G4 500 Mhz, 512MB RAM, Internal 20 GB HDD
Problem:
This problem occurs on both of my G4 Macs. In iMovie HD, I imported a JPEG from iPhoto with Ken Burns Effects on. The still photo appeared properly in the Clip Viewer initially, but appeared as a black screen in the iMovie Monitor. Once the imported photo with the Ken Burns Effects completed rendering, the clip in the Clip Viewer turned white and appeared as a white screen in the iMovie Monitor. I have tried almost everything I read about in these forums in search of a resolution.
*Resolutions that Failed:*
1. The photo is definitely a .jpg
2. Tried importing the actual .jpg file as well as importing from iPhoto.
3. QuickTime and all other Software updates have been applied and are running on the most current release.
4. Repaired disk permissions.
5. Created, saved and manipulated the iMovie file in the standard Movie Folder on my main internal hard drive. (i.e. – I'm not saving to an external HDD)
6. Created, saved and manipulated the iMovie file in the standard Movie Folder on my secondary internal hard drive. (i.e. – I'm not saving to an external HDD)
7. Deleted the 'mac.imovie.plist' file and created a new one.
8. Attempted to do apply the effects logged on as a different user.
9. Saved file, restarted machine and reopened numerous times but the problem persists.
10. Tried a lower resolution photo and the problem persists.
11. Attempted to import all the photos I planned to use, added transitions to all of the clips and rendered completely. Saved the file, restarted the machine and reopened the file with no change to the blank clips.
12. The iMovie trash emptying issue did nothing to help.
*Additional Notes:*
1. The problem is confined to the Ken Burns Effects in iMovie. I am able to work with true video clips without incident.
2. Ken Burns Effects operate properly in iPhoto 6 using the slideshow functionality.
3. I would use iPhoto, but it seems like it would be easier to line up specific sections of an audio track with certain Ken Burns Effects in iMovie. (i.e. – a crescendo at the 16 second mark of the audio track coincides with the end of a 'zoom' on a photo, transition from second 16-17 second mark, new photo at the 17 second mark and pan left to right from 17 second mark to the 25 second mark.) Point is that it lines up precisely with the markers on the audio track, which seems far easier to do in iMovie than iPhoto.
4. Please help me, I'm going nuts troubleshooting this bug! I can't find any resolution that works.
Thanks in advance for the help.
Message was edited by: Charlie Brown Jr.

Hmmm. You seem to have tried, without success, most if not all of the methods of resolving a Ken Burns black screen issue.
Some thoughts that have occurred to me:
1. Perhaps your G4 500mhz Mac is not fast enough. I think that the minimum spec for iLife '06 is 733mhz. Might have nothing to do with this problem, but I just mention it.
2. Are the sizes of your images too large, as can happen with some of these new high def cameras? iMovie has trouble working with very large images.
3. Do you have any 3rd pary plug-ins, particularly in Quick Time, that could be causing a conflict?
4. Do you have enough disk space for the project to operate?
5. Have you done a recent Quick Time update? Some users have reported a problem with that.
6. From your post, it appears that you have continuously worked within the same iMovie file that exhibits the Ken Burns problem. If this is true, try creating a new iMovie project and experimenting with a few clips to see if the problem persists in the new project.
Ken Burns issues can be very frustrating. I think that you will need to keep trying things until something works. Wish I could be more help, but perhaps some of the tech experts on this forum will have some workable suggestions.
There is an application called Photo to Movie that reputedly has a far better Ken Burns type of effect. If you can't resolve your problem, you might try downloading that app. I believe that it offers a demo download.
Good luck.

Photo Settings not showing up; cannot remove Ken Burns effect

Hello,
Earlier today, I selected the photo setting button and a little box showed up with the Ken Burns effect options in it, however now when I select photo settings, the only thing that shows up is the preview of the of photo zooming/panning. Please help... how do I get back to that little box so I can remove the Ken Burns effect from my photos! Thanking you!

Also having the same problem. When going to show photo settings, it shows black screen. Un checking Ken Burns and updating does nothing. All photos in slide show have same super zoom of Ken Burns with no way to remove it or alter it.
iMovie HD broken, iMovie 08 ***... The only reason I purchased Mac was for handling media and I end up doing projects on my old pc using photoshop elements.

Pan and Zoom (Ken Burns Effect)

Does iDVD 06 support the Ken Burns Effect? When I import a Slide Show from iPhoto to iDVD it looses the transitions and the pan and zoom features. I can add the transitions back through iDVD, but I can't find anywhere to add the Ken Burns effect back to the slide show? Is it possible? I will be really disappointed if iDVD 06 does not support this feature.

Welcome to iDVD Discussions.
I don't use iPhoto, so I can't help you with that, but I can tell you that iDVD does NOT have the KB Effect.
iDVD 6 Getting Started PDF download
Apple's iMovie Learning Site
Apple's iDVD Learning Site
iLife ’06 Multimedia Tutorials
General Learning Center
Ken Stone: Authoring in iDVD 6
My favorite, by far:
iMovie HD & iDVD 6: The Missing Manual
You can download Chapter four: Camcorder Meets Mac.
iPhoto 6: The Missing Manual

Ken Burns effect same in all iMovie 3.slideshow photos

I am working on a slideshow using iMovie 3.0.3. I am using iMovie because I have more than 99 photos, and would like the slideshow divided into chapters for iDVD viewing and navigation, and because I would like to add specific music to each individual chapter or slideshow, but have them play contiguously.
I have created separate albums in iPhoto for each chapter of my slideshow in iMovie. When I import all photos in an album from iPhoto with the Ken Burns effect box turned on and click Apply, each photo is imported, but the panning and zooming is the same on each photo, unlike when playing an iPhoto slideshow where the panning and zooming is automatically randomly applied to the photos in the slideshow. Am I doing something wrong and is there any way to correct this problem without manually setting the pan and zoom of each photo individually? Would a newer version of iMovie correct the problem?
Thanks,
Jennifer
iMac Mac OS X (10.4.6)

Hello Jennifer,
the behaviour of iMovie is quite normal as you will have to create a different setting for each picture in order to have a different effect upon import. up to version 5 (iMovie HD) this remains the same - and i'm quite sure also for iM 6, but haven't upgraded yet.
you have another possibility though: export your slideshow with random KB effects from iPhoto as QT movie and then import to iMovie
hope this helps
viva la mela

Ken Burns effect won't work with imovie 6.0.3

I'm hopeful to find a way to use the Ken Burns effect in my 6.0.3 HD imovie. Does anyone have a solution to this problem? I can't get it to work.

Did you empty iMovie's trash after creating your clips? Did you previously apply the Ken Burns effect to that particular clip and now want to change the settings?
If you already had the clip/photo imported using the Ken Burns effect, and then emptied the trash, you cannot redo the KB settings. It is a bug in iMovie. You will get the black frame when you try. The only thing you can do is reimport the photo.
Here is an explanation of the problem (Thanks to Matti Haveri) :http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#stillupdate

Using iMovie 9.0.4 cannot zoom in or out on ken burns effect? Only pan

Similar Messages

Maybe you are looking for