Using imovie error message when trying to add text to my project

When I try to create a project in imovie everything is working fine. When I try to add text to my project I click on the T to add text and the program shuts down.
Do I need to re- install something again?? any suggestions??

What is your operating system? Reader version?

Similar Messages

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

I continue to get an error message when trying to add Header

I continue to get an error message when trying to add Header & Footer. Therefore I am unable to add page numbers to my pdf. Help!!

Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

Bizarre error message when trying to add BT Vision...

I am getting a bizarre message when trying to add BT Vision to my BT Infinity broadband which is due to install on Thursday. I'm hoping it is only due to the fact the order has not completed and will be fine in a week. I did speak to an "advisor" but I helpfully was told the line cannot be checked until the current order is complete and I'd obviously want to know if there will be any problem with me getting BT Vision prior to that!
Has anyone else seen this error message and have any advice? Note that I am definitely not in any trial and the 0800 number is now dead.

Hi Evil_Dan,
Welcome to the forum.
If you can email in your details we'll check this, you can get our "Contact Us" link by clicking on my profile page.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Error message when trying to add a printer -50?

I'm using an HP LaserJet 2100M, connected to my iMac G5 with a JetDirect 610 networking card through the ethernet port.
Usually it works, but now when I've tried to reset the printing preferences (often necessary to get it to work) and go to choose a printer, I get an error message: "An error occurred while trying to add the selected printer.....error -50."
I've tried restarting, and using the disk utility, but it says nothing needs to be repaired. Anybody have any suggestions? Do I have to reinstall, or will any updates help? I'm using 10.4.3
thanks

Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
The supplied HP C3180 drivers will not work when the printer is connected to an Airport base station.
iFelix

Error message when trying to add printer

First my DeskJet 1125c wouldn't print then I got my fathers old deskjet 845c which worked for a few days. Now that doesn't work either and when I try to add a printer, I get an alert box with this message:
"An error occurred while trying to add the selected printers.
"server-error-service-unavailable."
So now I can't print from any of my two HP printers, DeskJet 845c or Deskjet 1125c.
Please advice
Best regds
PB G4 Mac OS X (10.4.9)

http://docs.info.apple.com/article.html?artnum=107054
You could use Printer Setup Repair from www.fixamac.net to help fix that, too.

Error message when trying to add new user

Hello,
Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
They are working on this database since 2009.
No upgrade was recently done.
when trying to add a new user they get athe following error:
"A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
Could you please advice.
Regards,
Maya

Hi Maya......
Go to Administration--> Utility and select the restore no. series.
Update this and try to add User.
But do it first in your test DB.....
Regards,
Rahul

Error message when trying to add transition or won't render anything!

I had been very successful in building a movie with video clips and still photos, and all was going along well until all of a sudden, I cannot add any more transitions! I keep getting an error message that states: "An unknown error occurred. You may be able to continue without any problems. You may also wish to save, quit, and re-launch IMovie HD."
Occasionally, it will let me add the transition, but then it just sits there for hours and will not render. I'm up to a 1 1/2 hour movie, which has taken nearly two weeks to build (I'm very new at this!) and would hate to start over!! I did try making a new movie, and the transitions ran just fine!
I have restarted umpteen times, even reinstalled IMovie HD. I'm running system 10.4.6 with an 80G harddrive, but have the movie saved on an external harddrive because it wouldn't fit on the other one. (It's at 22 G now!!)
Any suggestions??

I spoke too soon. I began a new movie and imported
photo clips, which rendered just fine. However, I
can drag transitions in between the photos, but they
simply will not render. Everything was just swell
until yesterday afternoon when I changed the length
of the clips so that there would be enough room for
the transition. I tried to do multiple clips at the
same time, but they never rendered. It was then when
I was unable to add any more transitions.
Aha! That may be different problem. There's a bug in iMovie that makes it impossible to update image clips after you empty the iMovie trash. If you imported the image with the Ken Burns checkbox ON, the bug can affect you later.
It's possible, I suppose, that this bug not only prevented you from updating the clips to a new duration, but made it impossible to add the transition to the clips.
After importing your images with the Ken Burns checkbox on, you might try dragging the source image out of the iMovie trash, described here:
http://discussions.apple.com/thread.jspa?messageID=2139814&#2139814
Karl

Error message when trying to add item in change BOM goup

Hi I went to transaction cs05,and trying to add item to specific material with BOM group,an error message popped up and saying assign the item to an alternative,what does it mean? How to solve?

Hi,
A finished material can have multiple alternative BOMS which can be stored in a common BOM group number. CS05 is used to change these multiple boms.
When you add a new item in CS05, system will ask - to which alternative bom the new item should be assigned and that's how you are getting this message. For example, if in a bom group you have 3 differnet alternatvie boms for a FG material, when you add new item in CS05, you will see 3 checkbox at the right hand side of the screen. If you want to assign new item to all the three alternative BOMs , than select all the three check box and save.
Regards,
Ravi Thakkar.

Getting error message when trying to add apple id to facetime and imessage, getting error message when trying to add apple id to facetime and imessage

When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
anyone else getting this problem?

The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
and promise date in that form for all the order lines or for some perticular lines in that order.
For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
Thanks and Regards,
Ragni Gupta
Edited by: 921176 on Jan 21, 2013 5:17 AM

Getting an error message when trying to add book to iPod?

Almost every time I try to add a book to my iPod touch from my computer, I get an error message that says "Attempting to copy to disk failed. A duplicate file name was specified." And then another pop up comes up that says "Itunes could not copy because an unknown error occured (-48)."
This has only started happening since I updated iTunes on my computer about 2 weeks ago and it happens 4/5 books that I try to add. As soon as I drag the book onto my iPod on the left of the screen, it comes up. Any ideas on why this is and how I can fix it?

See this previous discussion.
https://discussions.apple.com/thread/1634860

Why do I get an error message when trying to open PE 8.0 projects with PE9.0?

I am trying to open a project in PE 9.0 that I made with PE 8.0. Each time, and with different projects, I get this error message:
"Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatible. Please use apropriate application to open this project."
I have never used Adobe Premiere Pro nor is in installed on my computer! I updated my PE 8.0 with the patch that came out last year.
My Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. I have an Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
My hard drive has been defragmented and have 779 GB or 83 percent free space.

Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
Good luck,
Hunt

Error message when trying to add USB Printer (Hewlett Packart 3100 series)

I have configured express to my network but when I try to add printer, I select it from the list and it says, Error -9672. The printer is a HP 3180 and the connection is Bonjour. Any suggestions? Connecting the USB directly to the computer works fine.

Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
The supplied HP C3180 drivers will not work when the printer is connected to an Airport base station.
iFelix

Error message when trying to add transitions

can't add transitions in imovie 6, but I could 2 days ago. It was also failing to render titles.I tried these suggestions from this great forum: trashed iMovie prefs,repaired permissions, checked for 3rd party plug-ins, ran repair hard disk,ran MacJanitor, reinstalled imovie 6,freed up 28 GB on hd, but still couldn't render titles. After I ran diskWarrior, I was able to render titles again but still can't add transitions.Is the number of photos or titles an issue? I have 450 and still need to add video clips & music. I have to have this idvd project for our church done in 3 days and things keep screwing up!

What is your operating system? Reader version?

Using imovie error message when trying to add text to my project

Similar Messages

Maybe you are looking for