Using InDesign CS6 onWindows PC. Apple icon and traffic lights in L top corner are missing.
Using InDesign CS6 onWindows PC. Apple icon and traffic lights in L top corner are missing and so are some of the editing features. I fixed this once before by accident but can't remember how I did it. All I remember is it had something to do with the veiw % in other applications - I think!
I've been using a tutorial that is obviously been done on a Mac.
I used to have a link somewhere that was basically a list of all of the differences between the two platforms, but I can't lay hands on it. I'm sure if you asked us about the features that were missing or broken, we could answer fairly easily - you know, like "Preferences are under the InDesign menu on a Mac, but in Windows they're under Edit."
The worst of these differences is in keyboard shortcuts - Macs have an extra modifier key, so whenever I switch platforms I always spend twenty minutes flopping my hands around and muttering uncomplimentary things about Cupertino and Redmond, at least until muscle memory takes over.
Similar Messages
-
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?
Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.
-
If I have installed InDesign CS6 on a windows computer and I want to change to a Mac. Can I use my licence or do I have to change to CC?
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-la
nguage-swap.html -
Can I use InDesign cs6 to open and work with PM6.5 files?
Can I use InDesign cs6 to open and work with PM6.5 files?
Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days! -
When I turn on my iMac it comes up with the login icons which I then choose and log into. The password works and I then get the apple icon and the spinning wheel. After about a minute the Apple icon turns into a prohibited icon. However, if I log in under the guest icon, I can access the wifi and get to Safari. I really don't know what to do next. Any help would be gratefully appreciated.
Are you running any A-V? If it's an iMac 21.5, I don't think you're running Leopard, 10.5. Probably at least Snow Leopard, 10.6. This is the Leopard forum.
This article says meant for 10.3.9 and eariler, but contains some still useful suggestions.
http://support.apple.com/kb/TS1411
Try a Safe Boot. Shift at the startup chime and expect a much longer time to boot. This will bring you to a login screen with "Safe Boot" in red.
Look at this as well.
http://support.apple.com/kb/TS1417 -
Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.
Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me. -
My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.
Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions. -
My macbook pro doesn't bootbeyond the grey screen with apple icon and spinning wheel.
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
Hi, I am using Indesign CS6, How to set the page size in Inches.
Hi, I am using Indesign CS6, How to set the page size in Inches.
All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change. -
How to create interactive pdf for Ipad using InDesign CS6
Hi I created a Magazine layout using InDesign CS6 and wanted it to be viewed on native Ipad reader (but not as apps). I put interactivity features like page navigations and hyperlinks and converted it to interactive pdf. The problem was the links and buttons are not showing on Ipad.
I tried using Acrobat Pro to create the hyperlinks and this time the navigations and hyperlinks are showing. But is there a way not to create the hyperlinks manually one by one (specially the next page and previous page). If I have more than 100 pages of documents this process will be very tedious.
Is there a solution to create the interactive pdf directly from InDesign without creating the links in Acrobat?Hi Guys
This is Sean Smith. Marilou who wrote the original post works for me. Bob if you could point us in the direction of details you need I’ll ensure we provide the additional information as soon as possible.
M tells me she pretty much doing exactly what Steve's article suggests.
The concern is what a remarkably cumbersome process this appears to be.
Even though I believe her explanation entirely I find the problem to be highly disconcerting as it’s wasting an immense amount of valuable time and inhibiting the production process significantly.
She is producing wonderful results but via an immensely painstaking process fraught with potential for error. Each page link has to be manually linked to the next by number. It’s entirely possible to make a mistake and link to the incorrect page thus missing pages.
If she inserts a new page – guess what? All the pages links have to changed manually and double checked yet again.
If she makes a ‘Contents’ section as we do and exports the InDesign file as an interactive PDF all the contents items and links are missing and are therefore blank.
She then has to export the document as a plain PDF and do the job again in Acrobat.
For an extravagantly wealthy company with such extraordinarily expensive software I find this to be entirely incredulous.
Who is the Product Manager for InDesign?
Are they aware of this issue?
What are they doing about it and when will it be done?
Just curious are you guys paid employees or volunteers as this appears to be an official forum and we are new here?
Digital publishing of PDF magazines appears to be an explosive growth market especially for platforms such as the iPad but this primary product for the task appears to be inadequate or ill-conceived.
Is DPS a possible solution or is this more for Apps than PDF production?
Regards
Sean -
How do I save my file using InDesign CS6 so that it can be opened with CS5?
I know other people asked similar questions but I can't find anything that helps me figure my issue out.
Basically, I packaged my file using InDesign CS6. When I sent it to the person it needed to be sent to, she couldn't open it. She was running CS5.
So now I'm trying to REpackage it still using CS6 but when I make an IDML version and try to package it, it says that I need to SAVE it. Well the only options are CS6, which I can't use again, and another IDML version. If I did the IDML it would just save it as another untitled document and then I'd have to start all over.
Actually I just tried that, and InDesign crashed.
Any suggestions?Hey,
There is no such function in InDesign as 'saving to a lower version' (as it is in e.g. FrameMaker). There are interchange formats: obsolete INX (CS2,CS3,CS4) and current IDML (CS5, CS5.5, CS6).
You need to export (ctrl+e) previously saved document into IDML and attach to existing INDD file (Attaching is not necessary as IDML is a self-sufficient file). Also it's a really good idea to attach a PDF file (from CS6) as there might be some differences when opening a IDML from higher file in lower version program.
Final package could look like this:
Document fonts
Links
original file.indd
original file.idml
original file.pdf
best regards
Kuba -
Have a 2008/9 iMac on starting up today I have only a white screen, apple icon and a continuous revolving sun. Have tried turning off and on and disconnecting and reconnecting the power with no affect - any thoughts or advice please. Thanks Matt
If your iMac came w/system DVDs, do the following:
Disconnect all devices from the computer then do the following:
Boot up from your DVD that originally came w/the iMac while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius. -
My mac book air turn on with grey apple icon and spining wheel. then it wont turn off.
my mac book air turn on with grey apple icon and spining wheel. then it wont turn off.pls help
Have exactly the same problem with my wife's MacBook Air. After restaring in Restore mode and trying to repair the disk (Disk Utility showed errors in the verification), the system tells me to backup as much data as possible (how?), re-format the disk and restore backed-up files. Error comes up when "updating boot support partitions for the volume as required".
Original restart action was done due to software update requesting it, if I remember correctly, iTunes was updated.
I don't want to start a painful back-up procedure (although I do regular back-ups): how should I know, where iPhoto stores it's data or where my mails are (yes, still using local mail)? How can I access the data if I can't boot?
My iMac's disk crashed also a couple of months ago and I'm still recovering. I have four Apple devices, two of them have failed. Can Apple afford such a ratio?
Maybe you are looking for
-
I can�t decrypt a text encrypted (using RSA) with keys on smartcard.
I use a Cyberflex Access e-gate smartcard and I can encrypt and decrypt any text on the card but if I encrypt a text outside using the exported public key, card is not able to decrypt the message. On the card side: � RSAPrivateCrtKey privateKey; RSAP
-
FIX FOR OUTLOOK CONTACT - CALENDAR SYNC PROBLEMS
OK Guys. I have figured out the problem with Itunes not syncing the OUTLOOK CONTACTS & CALENDAR EVENT PROBLEM (For those who have this problem). So without further due.... 1) Go to Outlook/Tools/Option/Others/Advanced Options/ADDIN MANAGER 2) Remove
-
Apps don't launch or work after Copy Function
Howdy, I'm having another issue with ARD 3. I've just rolled out StuffIt Expander 11 to all my Tiger Clients via ARD's Copy Function. The copy function works fine and it does copy the app to the destination, which is the Applications Folder. The app
-
Boot Camp for Macbook Pro "Windows 8"
Hello. Excuse me my ignorance. I have MacBook Pro > http://www.zzounds.com/item--APLMBP17 And I installed Windows 8.. I can't find Boot Camp for it.. Help me please...
-
Cannot open Lumix FZ70 RAW images
I upgraded to Elements 12 last week to open my Lumix FZ70 RAW images but it says that my images have an unrecognized format. Documentation suggests that the FZ70 is supported in Camera Raw but it don't work for mine. One of your web pages (http://he