Using intel iMac OS 10.6.8 when streaming progress stops and will not continue

When streaming a video there is progress bar that is gray and moves to the right in advance of the small vertical bar that shows the position of the program at that moment. Sometimes the grey bar stops moving then when the vertical bar reaches the end of the grey bar the streaming stops. And I can't make the gray bar advance.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Similar Messages

When I try to install Flash, it stalls and will not continue

When I try to install Flash, it stalls and will not continue. What do I do?

Mabel are you referring to Flash Player or Flash Professional? Also what version are you trying to install? Finally what operating system are you using?

Since the upgrade my iphone periodically will not send iMessages to other iPhones. I am able to receive them and can send from my iPad. When I push send the bar goes 3/4 of the way and the stops and will not send at all

Since the upgrade my phone will not send iMessage to other iPhones. I can send from my iPad. When I try and send the message sends 3/4 of the way and then stops and does not send at all

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

HT1296 My email address has changed. I have successfully amended it on my computer in Apple iTunes but my iphone 4s and my iPad still show the old email address when requesting the password and will not let me update Apps. Please can anyone advise me what

My email provider has changed and I have a new one.
I amended this on my computer under my Apple iTunes account without any difficulty and it was authenticated. However, I still have the original email appearing on my iphone 4s and ipad2 and I cannot update that information. Neither can I use my usual password to update my Apps. Please can anyone assist me with simple instructions on how to change these important passwords? Thankyou in anticipation for reading and hopefully considering a solution.

Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?

I have a Officejet 8500 A910n. When printing a pdf the print job just stops and will not print.

Only certain files the print job just stops and will not print in Adobe Acrobat X. All other applications work fine.

Have you tried downloading and installing Adobe Acrobat XI? http://www.adobe.com/products/reader.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

When I play games and click on it, a window comes up asking if I want to open in a new window or it zooms in and will not play. How can I solve this?

When I play games and click on the screen, a message appears asking if I want to open in a new window or it just zooms in and will not continue. `how can I solve this please?

Thanks. I read the article but don't understand whether or not I can change the preference with regard to Hotmail.

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367

I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??

I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??

There is no user name needed to "enter" or use iPhones...
Assuming you mean your iTunes Store account ID:
Settings > Store > tap ID > sign out > sign in with new ID

Lightroom 4.4 freezes, continuous "uploading" and can't quit application. Using intel iMac

How can I prevent Lightroom 4.4 from constantly freezing, continuously "uploading" and have ability to quit application on my intel iMac?

How can I prevent Lightroom 4.4 from constantly freezing, continuously "uploading" and have ability to quit application on my intel iMac?

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Please help! My Itunes says corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling so I moved it to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I can't delete or open to close it, what do I do

Please help!
My Itunes says there is a corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling ITunes so I moved ITunes to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj". I can't delete ITunes or open ITunes to close the Japanese.lproj, what do I do? Thank you for any help you can provide..

It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj".
Interesting. This sort of thing is more common on Windows systems. Taken at face value, one of the iTunes program files (one of the Japanese language resources) is damaged.
I'd try running your Disk Utility over your startup disk. Does it find/repair any damage? If so can you empty your trash and reinstall your iTunes successfully now?

Using intel iMac OS 10.6.8 when streaming progress stops and will not continue

Similar Messages

Maybe you are looking for