Using interactive form to capture data from user u0096 please helpu0085.

Hi folks,
I am trying to use an interactive form to capture some data from the user.
This is what I have planned to do
User runs a program which will have four function module calls
(FP_JOB_OPEN
FP_FUNCTION_MODULE_NAME
'Function modules which the above function module returned'
FP_JOB_CLOSE)
This will display a print box where I can click on the print preview to get the interactive form.
From here I am not sure how to go about, but following is what I can think
Once the user enters the data in the form and he should be given some button to click(say save). This button click should trigger the program (PAI) which will read the data from the form (this data will be saved to a Z table)..
First of all, Can I do this? Please guide
Note: I am not using WebDynpro ABAP or JAVA. Rather I am trying to use a Module pool + interactive form solution.
Thanks in advance

could you tell me how to read data from the form ? which function module(s) to be used ?

Similar Messages

Using Bulk Scenario to Capture Data from Source for First time

Hi,
I need to setup ODI for a table between two Database. Genereally, I follow practice of importing oracle dump of table into target database for the first time before delta capture preocess starts. However, this time there is space constraint at source system & we can not create the oracle dump as it will result into 120-130 GB.
Is it possible to import these one time data into target Database via ODI Bulk Schenario. Does ODI have any timeouts set at the database connetion as this will take long running session to copy across such a huge data. Will it cause any time outs at Database.
Please suggest.
Thanks.

Hi All,
Thanks a lot for your responses. Moving ahead and trying out different things, i figured out that the EPMA/Planning had to be on the same machine as the ERPI. After installing EPMA/Planning on the same machine, the ERPI target application registration page started displaying all the applications created using the EPMA and i also successfully registered my target planning application with ERPI. But you know life is not that fair, right after the resolution of this problem, another problem appeared :(. While registering the target planning application, EPMA was by default selected as the Metadata Load method and i selected FDM as the data load method.
After registering the application, i happily started adding the metadata rule as instructed in the knowledge document 951369.1 (Thanks user735469 for the reference), but when i clicked on the Add Dimension button, the next page gave an error stating There are no more dimensions remaining to be mapped under this application. and the dimensions drop down under the target application area was empty.
According to this link http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/fdm_11113_readme.html , this error can be fixed by clicking on the refresh button but i couldnt find a refresh button on the entire page. I tried refreshing the browser but to vain. I also downloaded and applied latest ERPI patch but still no positive results.
Any idea why is this happening ?
Desperately waiting for your help. :(
Thanks & Regards,
Muhammad Jamshaid Nawaz

Using Interactive forms in Webdynpro Abap

Hi all,
I need to learn using Interactive forms in Webdynpro Abap. Can any please tell me from where to start with and what are the things that needs to be installed extra in the client system.
Also please tell me where i can get the tutorials on it..
Thanks,

Hi,
try this.
You can download the Adobe LiveCycle Designer installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation and Upgrade
-> <Choose any OS and DB combination.>
-> Adobe LiveCycle Designer 7.1
Download this file and extract it to your local hard drive.
Regards, Heidi
PS: See <a href="https://service.sap.com/sap/support/notes/962763">note 962763</a>
Message was edited by:
        Heidi von Geisau

Propagate Data from User Profile to Resource Process Form doesn't work

Hi,
i've created a new custom task for Propagate Data from User Profile to Resource Process Form with a gtc connector but the task is never triggered!!!
i need clues to resolve this .
thnks.!!
oim 11g 11.1.1.5 bp4. high availability with 2 nodes and a balancer.

Hi Rajiv:
->Did you make that entry in Lookup as mentioned in that thread/post ?
ANSW: yes.
->Did you use exact naming convention for your tasks ?
ANSW: yes i put the same name that i put in the lookup into my process from.
In which process definition have you created your task. Make sure it should be other than "Xellerate User" process definition.
ANSW: PROCESS DEFINITION: * iPlanet User
*TB_BAN1_AUR_GTC
*TB_BAN5_AUR_GTC
*TB_BAN3_AUR_GTC
etc.. GTC conector.
i have a test environment where this functionality works succesfully and i put the same in my production environmnet and the task never is triggered.

Capturing Data from forms before it is stored in the table

Hi...I would like to capture data from a form before the data is stored in the database. that is, i would like to access whatever data is entered into a field right after the user pushes the Insert button. I would like to do some processing on the data and then store it in the table along with the data from the other fields. Is it possible to access it through a bind variable or something? Please tell me how to go about it. Thanks

Hi,
You can make of the session variables to access the values. Every field in the form has a corresponding session variable with the name "A_<VARIABLE_NAME>". For example for deptno the session variable will be "A_DEPTNO"
Here is a sample.
declare
flightno number;
ticketno varchar2(30);
tdate date;
persons number;
blk varchar2(10) := 'DEFAULT';
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
tdate := p_session.get_value_as_date(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE');
persons := p_session.get_value_as_number(
p_block_name => blk,
p_attribute_name => 'A_NOF_PERSONS');
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_FLIGHTNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TICKETNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE',
p_value => to_char(NULL)
end;
In the above example the values of the variables are got into temporary variables and session variabels are set to null.
Thanks,
Sharmil

Using streams to capture data from physical standby database.

Does anybody know if it is possible to use streams to capture data from physical standby database instead of PROD database? The standby database is in read only mode. We use Oracle 11gR2.
Thanks in advance.

physical are closed : how will it managed the queues and overspill queues when target is not present? Also the data dictionary must reflect the primary but If you run capture, then you introduce rules that are not on primary: How ?

Capturing data from a RS232 device

how do I capture data from an RS232 device to my APEX application. Precisely, I am using a barcode scanner and I need to know how to get the barcode data into an item (say P12_barcode) in my application. I have tried the keyboard wedge and the problem is that I have to set the input focus each time I need to collect the barcode of an item, so I have to switch to RS232 mode but how do I get this barcode data now?
Please HELP...

Thanks a trillion for this reply! wether your reply was helpful is an understatement in this matter!
That is the type of Barcode scanner I am using man... they call it USB Keyboard emulation. It scans into note pad, word processors and text items freely.
In my design for a solution to this problem, I have on paper, your type of solution but I lack the ability to set the focus on the desired Text Field when my cash_sales page loads.
Secondly you said "I did have to set it to include a "Enter" after each scan" that touched upon another bug in me: I had always wanted the form to submit after each scan so that my procedure can use it against the items database and display the item in my Current Transaction Report. How did you set it to include a "Enter" after each scan? Is it on the scanner or at the page item level?
Precisely I am using Metrologic MS9520 barcode scanner a.k.a Honeywell MS9520 barcode scanner!
If I can set a cursor in my Px_Barcode text item after loading my CASH_SALES page and automatically submit the page after a scan(without clicking any button) then my nightmare is over...and you become my Virgo 2009 Hero.
Happy September :)

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Capturing data from ALV grid

Dear experts.
Can anyone help me to capture data from ALV grid to pass to a BAPI FM.
My ALV grid has the check box as first column and I want to capture only the rows in the grid with these checkboxes checked. I would prefer to do it without OO.
Regards
Sathar

Loop at the table used for ALV data where <checkbox-field> = 'X'.
Best,
Jim

How to bind the data from user table into user report

Hi All,
Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
Platform: SAPB1 2005A
Add On Language: VB.Net 2003
Thanks.
rgds
ERIC

Hi Ibai,
Thanks for your feed back. I give you an example.
Let say now i wanna print employee list, so i will go
1. Main Menu -> Reports -> HR -> Employee List
2. Choose the Selection Criteria -> OK
3. Matrix will display (Employee List)
4. I can print the report click on print button
5. Printing report
My target
1. Main Menu -> Eric_SubMenu -> Employee List
2. Matrix will display (Employee List)
3. Print button
4. Print report
My problem
Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
Thanks.
rgds
ERIC

How can I use Automator to extract specific Data from a text file?

I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE    memory (+                68 range fill )
16 789
bytes of DATA    memory (+    59 absolute )
1 875
bytes of XDATA   memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

Is there a way to Hide data from Users in Cubes?

Hello All,
Is there a way that I can easily hide data from users. For instance, in the XYZ cube we have data loaded through the year 2005. Is there a way for me to still keep the data in the cube; however, just hide 2005 so when users go in they do not see the year 2005. I know we can set filters and then apply "none" on select members. But the disadvantage with this is the data at the top level shows up as No access and it is only when the users drill down will they be able to see the data. So instead is it possible to hide data with everything else just normal?
Thanks,
Ted.

Celvin Kattookaran wrote:
With MetaRead Year will show up as "No Access"/Missing for users. http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/frameset.htm?maxl_meta_read.htm
Thanks for the reply Celvin, So I understand from the link you posted that when using metaread the data of the ancestors is hidden. However in our case Years data is not getting hidden.:)
I think this is because Under years we have CY, LY-1, LY-2, LY-3,LY-4,LY-5,LY-6,LY-7 as children. However Only CY Consolidates to Year. So I create a metaread to include CY, LY, LY-1,LY-2,LY-3,LY-4,LY-5,LY-6 members and not LY-7. As a result my Year still includes data as CY is included in the metaread filter.
So this tells me(please please correct me if am wrong) it is not a must like indicated in the technical reference that data will be missing/No Access for ancestors of the metaread members. Data will be shown as No Access/Missing for an ancestor only if the members the ancestors consolidate from are not included in the metaread! Please let me know if this is right. I have verified it on my end but I would like to know what you think as Tech Reference sounds like "if metaread read filter is used, ancestor data will be hidden" which is not true.
Thanks,
Ted.

Using crystal report to extract data from Audit Log

I have a customised form which contains main fields (i.e 20 fields) and when a field is changed, it's being recorded in the audit log.
Would it be possible to use Crystal Report to extract data from the Audit Log? Ideally, i would like the report to show me all the latest field values in a spreadsheet type format (i.e. one field per column)
Has anyone try this and if so, what is involved?

An element with both text & a sub-element is a mixed-content element.
For example ElementA is a mixed content element.
<ElementA>
Text
<ElementB></ElementB>
</ElementA>
Extract just the Text from ElementA.
<xsl:template match="ElementA">
<xsl:apply-templates select="text()" />
</xsl:template>

Capturing data from a website

Hello,
I would like to capture data from websites, or get a snapshot
of a given URL. I was wondering how this would be posible using
Java.
Any help or comments will be greatly appreciated.
Chanie

Thanks, that worked beautifully.
I was wondering if you could help me with one more point.
There are some webpages that before getting to them you must
give a username and password. I was wondering how I could get
data from such a webpage if I know the username and password
using Java.
Thanks in advance.

Blank page when using Interactive Forms(Webdynpro thru Java)

While i was running the application using Interactive Forms iam getting Blank page.
Previously when i try to view the output, i can able to view it without any errors,suddenly what happened is iam knowing.
ADS was perfect,CredentialRights there,AdobeReader-7.0,ACF with SP11 installed and Active-X Controls Enabled.
Can i know where the problem exactly is?Is the problem from client side or server side or do i need any settings for IE6.0?

Hi Sankar,
Did you use NW04 SP11 before (with ACF) and upgraded to NW04<b>S</b>? Your ACF version you mentioned is for NW04S and not for NW04.
Also keep in mind that SAP changed the way Adobe forms are displayed (ACF will be replaced by the ZCI layout) - ZCI stands for Zero Client Installation. If you upgraded to 04S, you might need to change your forms as well (also the WD application).
On your interactive forms application (the webdynpro) are there any links outside the adobe form? What happens if you click on it? At our side we have created a customer message, since the ZCI form is not being displayed. We also get a white Adobe placeholder, and when we click on a link outside the placeholder, we see the Adobe PDF logo being displayed in the placeholder (placeholder = frame).
In your case: do you see a small red cross icon in the frame? That means ACF is not installed properly.

Using interactive form to capture data from user u0096 please helpu0085.

Similar Messages

Maybe you are looking for