Using interface for recording. Mic is selected and recognized but won't record., Using interface for recording. Mic is selected and recognized but won't record.
Help please! I am using an interface to record vocals. I've used it before without any problems but today it won't record. Garageband recognizes the mic but for some reason it won't record.
When you say nothing was touched, does that include a software update of any kind?
Do you have Apple's auto update enabled?
Similar Messages
-
Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio. I have all that figured out. I'm able to efficiently record my audio and screenplay through these instruments and programs. What I am having trouble with is the stereo mix. I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone. I want there to be no external sound except me talking into my microphone. I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone. Can't figure this out
-Downloaded soundflower, have the output as soundflower. Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
-I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps. That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record. Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel) Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it. I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5 2.4 GHz Intel Core i7 4GB 13333 MGz DDR3 (If any of this is imporant)Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution" -
I just upgraded to garageband 10.0.2 and I don't know how to set up a mic for recording via USB
I just upgraded to garageband 10.0.2 and I don't know how to set up a mic for recording via USB
Connect your USB mic or USB Audio Interface to an USB port.
Create an new Audio Track from the Tracks menu > New Track.
Select "Audio > Record using a microphone ...."
Click "Details" to reveal the Input sources.
Click "My instrument is connected with..." to open the GarageBand Preferences "Audio" tab and select your microphone as Input device.
In the Track menu > Track Header enable "Show Record enable" button.
Enable this button for your vocal track.
Open the Library pane to select a vocal patch your new track. -
I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...
What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?
-
I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages. If I type it won't continue in Hebrew. I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste. Does anyone know how to fix this? I use an older MacBook running OS 10.9.1. I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.
Just clarifying:
Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
Pages 5 has much better support but with bugs.
If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
As Tom recommends the only real solution on the Mac is Mellel.
Peter
btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
Peter -
Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?
The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be. -
I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem
grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR -
Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.
As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps. -
Some cookies are necessary in order to manage material on banking sites, subscription sites, etc.
It seems to me that enabling some way to scroll through the cookie list, marking those one wants to keep, would be useful -- then one could periodically blast all the other detrius away with the "Remove all cookies" function.
Perhaps in a future release?Exceptions can work both ways. If you disable (block) all cookies then you can set an allow exceptions for cookies that you want to keep. If you keep cookies then you set set a block exception. You can see the permissions for the current server on Tools > Page Info > Permissions
If you use [[Clear Recent History]] then you remove all stored cookies, also the ones that are an allow exception. -
Yamaha MO8 and Korg Volcas with Logic Pro X- recommendations for mixer and audio interface
I plan to use Logic Pro X to access and configure the patch list for my Yamaha MO8 workstation. The Steinberg software I downloaded previously didn't work and never allowed me to configure the sounds. From what I've heard, I was told to use a cheap mixer or a Audio/MIDI interface (like the Scarlett 2i2 or 4i4). The Yamaha MO8 will be used as a master and has MIDI IN, OUT, and THRU. I also have the Korg Volca synths to use as slaves (they only have the MIDI IN port), and plan to connect them to the MIDI THRU on the keyboard. I already have the Yamaha USB driver installed, and the Mac recognizes the device. I also have the Portmidi app and wonder if that will allow me to see the patch list (with the actual names, not numbers).
What mixer and audio/MIDI interface do you recommend to use the Yamaha MO8 and the Korg Volcas? Just to be clear, I don't want to use software synths, but would like to use the external instruments to get the audio (which I know can be selected through the Environment Panel on Logic Pro X).Anything with 2 audio inputs and 2 MIDI outs.
-Out HP jack of Volca-1/8 to 1/4 adapter into Audio interface 1 (For any that are stereo use both 1 and 2 and use a Y splitter in addition to 1/8 to 1/4 adapters.
-Midi out from interface to Midi in of volca (Or buy a USB to MIDI interface for about $35)
-When starting up the volcas hold down the "Memory button" the LED will tell you what MIDI channel it is set to, you can change it if you wish)
-Create external MIDI track and set it to the same channel as the Volca (Only if you want to do sequencing in the DAW, if thee Volca sequencer is handling it then not necessary)
-Patch together the Volcas via the "synch out/Synch in" jacks to insure they are synched
-Record them all together or one at a time, depending on how many simultaneous tracks your interface can handle. -
- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
if (lstProducts.Items[i].Selected)
if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
productUnit.Add((decimal?)prod);
counter++;
if (counter == 0)
productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
ReportLogon rptLog = new ReportLogon();
rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank youHi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2 -
im very new to computers but very fast learner and very mechenacal but i cant spell my way out of a wet paper bag! lol i receved this macbook pro runing lion 10.7.5 *** a gift slash i paid for it means the most to me its my babie someone has took it apon themselfs to put a keyloger on it been moving files opening accounts in my name basikly identy theft the did not expect me to catch on this fast when i first got it i dident even now ho to use the mouse pad but been real fortinat i have to the point i know the operating systems realy good but little things still learning iv overloded this thing twice now and brout it back pluse the last time i shute it down trying to get ride of owes so ever on hear i know it sounds crazy but have figuerd out what apps there useing and can revirbalize it back to some one kinda lol remind you im an idiot on computers lol the changing source cods useing key loger of some sort and remote deskstop conection, and a app to watch and record it on there iphone!last time i had coach reboot it i beged him for the start up disk he works for dell tride to tell him in the begining but dident know unuff to verbilize it to him pluse the terminoligies but i have been consuned buy it need some help to file in dark sposts on knolige and if rebooting my mackbook pro is the way to go got a lot of apps from coach dont want to lose im a poorbaserd thats whuy iv been avioding this at all cost plose i dont know if what i got for start up cd is right i was reading you need i desk please i need a bad *** coputer haker iv done all the simpel stuff some of the hard stuff gotten so close but olmst screwd up funkshons "systems preferences plans and framwork plains trying to get rid of this probelem no im not loosing it thats why i need some one who knows what there doing and is up for a challinge sorry about the spelling its bad i know but im only kinda dump lol pretty smart actully whent from be a compleat dump *** on computers to being abel to show some of my would be computer savey friends some tricks and how to do things, really still dump when it comes to windows but its kinda like appel,got lots of quistins like how afer all i done and coach even reboot ti for me (not useing cd but hard drives to reboot so id have apps that cost lot of money on it but cought him right in the middel of moving and i ended up getting lion 10.7.5 insed of having mountin lion 10.8.5 yes it was a big deference too miss mountin lion so much pretty bumed out that this person has done this to me kinda know who it is but cant prove it plese help ill do whatever....
Hi
Level 2 posters and Above can report various posts.
When they do so they have various options that they can attribute as the issue.
I have reported your post.
I found the one block of text very difficult to read.
9:36 PM Monday; January 28, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?
Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out. -
For the 2nd day my iPhone 5 will not let me download updates for apps. I've tried selecting each to click off wait, and have selected new updates indvidually instead of all together. Also have shut the phone down and have even deleting the apps completely and re-downloaded but to no avail. Each app continues to sit on my screen with the line below as if it is about to download but never does, and now any apps I've tried to updated will not let me use them.
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
Attachments:
SITProblem.JPG 101 KBHi,
No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
Himadri
Maybe you are looking for
-
Process Order Schedule Finish date before Schedule Start date
On rare occasions, the process order Schedule Finish date is before the Schedule Start date. This causes an error on the APO system when the process order is CIF to APO. Does anyone have any ideas how this occur? Thanks. Best regards, Sandy
-
How to hide Functions in Cfolder
Hi All, As per our requirement in SRM Cfolder once we click on Home it will display all Business functions like:Competitive Scenario,Meetings,Notification Template etc. we need all these based on some authorization object/group. Please guide me to so
-
After installing Mavericks, I can't copy or move files to a music server running Vortexbox(Fedora Linux based). I get a cannot perform operation, you do not have permissions for some items. The permission arrow in get info shows I have both read and
-
Transporting problem gui_status to live system
Hi gurus, I have a problem transporting gui status to live system.In development system area(se80),I see the gui_status folder but when I'm transporting the all program to live system,gui_status is missing.Can I get request only for this gui_status?
-
Conform to SAP address format settings, is there an object or service?
Is there any object or service available that implements the SAP Business One address formatting feature--i.e. we would like to have something that puts the address in the proper format given the following parameters: Address Format (Code or Name fro