Using Internal Table in F4help in ALV grid

HI All,
I want F4 help on ALV GRid with my own internal table data to be shown in F4 help.
the field is KOSTL.
Thnx
RK

Hi Rahul,
For class based sample code on ALV Grid F4 you can check this link --
[F4 help in class based ALV Grid|http://wiki.sdn.sap.com/wiki/display/Snippets/How%2bto%2bimplement%2bF4%2bsearch%2bhelp%2bin%2bOO%2bALV%2bGrid]
Regards
Pinaki

Similar Messages

  • Report using internal table events

    Hi,
    i have an internal table with  the fields 1. profitcenter 2. company code 3. gl account 4. amount
    for each profit center i need to seggregate accounts based on company code.
    the report should look like the one below.
    please suggest some code using internal table events at new , at end etc. as im not using alv. your help will be rewarded
    regards,
    ravi.
    -Profitcenter-companycodeglaccount-amount---
    -pfcenter1----
    glaccount1-1000---
    glaccount2-2000---
    4444-total--3000---
    glaccount1-4000---
    glaccount2-1000---
    3333-total--5000---
    -profitcentre1*total8000---
    profitcentre2.........

    Hi.
    TYPES: BEGIN OF G_I_DATA,
             PROFIT(4)   TYPE C,
             COMPANY(4)  TYPE C,
             ACCOUNT(10) TYPE C,
             AMOUNT      TYPE P,
           END OF G_I_DATA.
    DATA: G_IT_DATA TYPE TABLE OF G_I_DATA,
          G_WA_DATA TYPE G_I_DATA.
    DATA: G_SUM_COMPANY  TYPE P,
          G_SUM_PROFIT   TYPE P,
          G_AMOUNT       TYPE P.
      G_WA_DATA-PROFIT = '0001'.
      G_WA_DATA-COMPANY = '1111'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
      G_WA_DATA-AMOUNT = 2000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0001'.
      G_WA_DATA-COMPANY = '1111'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
      G_WA_DATA-AMOUNT = 3000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0001'.
      G_WA_DATA-COMPANY = '2222'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
      G_WA_DATA-AMOUNT = 4000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0001'.
      G_WA_DATA-COMPANY = '2222'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
      G_WA_DATA-AMOUNT = 5000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0002'.
      G_WA_DATA-COMPANY = '1111'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
      G_WA_DATA-AMOUNT = 2000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0002'.
      G_WA_DATA-COMPANY = '1111'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
      G_WA_DATA-AMOUNT = 3000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0002'.
      G_WA_DATA-COMPANY = '2222'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
      G_WA_DATA-AMOUNT = 4000.
      APPEND G_WA_DATA TO G_IT_DATA.
      G_WA_DATA-PROFIT = '0002'.
      G_WA_DATA-COMPANY = '2222'.
      G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
      G_WA_DATA-AMOUNT = 5000.
      APPEND G_WA_DATA TO G_IT_DATA.
      SORT G_IT_DATA BY PROFIT COMPANY ACCOUNT.
      WRITE: /6 'ProfitCenter', 20 'CompanyCode',
              34 'Glaccount', 48 'Amount'.
      WRITE: /6 SY-ULINE(50).
      LOOP AT G_IT_DATA INTO G_WA_DATA.
        AT NEW PROFIT.
          WRITE: /6 G_WA_DATA-PROFIT.
        ENDAT.
        G_AMOUNT = G_WA_DATA-AMOUNT.
        AT NEW ACCOUNT.
          WRITE: /34 G_WA_DATA-ACCOUNT,
                 48  G_AMOUNT.
        ENDAT.
        G_SUM_PROFIT = G_SUM_PROFIT + G_WA_DATA-AMOUNT.
        G_SUM_COMPANY = G_SUM_COMPANY + G_WA_DATA-AMOUNT.
        AT END OF COMPANY.
          WRITE: /20 G_WA_DATA-COMPANY,
                  34 'Totle',
                  48 G_SUM_COMPANY.
          CLEAR G_SUM_COMPANY.
          WRITE: /6 '*******'.
        ENDAT.
        AT END OF PROFIT.
          WRITE: /6 G_WA_DATA-PROFIT,
                  20 'Totle',
                  48 G_SUM_PROFIT.
          CLEAR G_SUM_PROFIT.
          WRITE: /6 '*************************************'.
        ENDAT.
      ENDLOOP.

  • Abap Logic for performance tuning not working when using Internal tables

    Hi,
    I wrote this piece of code that is working correctly that is select SUM of cost from DSO where Plant is the same for Sales Items.
    LOOP AT RESULT_PACKAGE INTO rp.
    SELECT SUM( /N/S_STRDCOST ) FROM /N/ADSP_DPIT00 INTO
    rp-/N/S_STRDCOST
    WHERE /N42/S_SALESITEM = rp-/N42/S_ITEMID AND /N42/S_PLPLANT EQ
    rp-/N42/S_SOURCE.
    MODIFY RESULT_PACKAGE FROM rp.
    Clear rp.
    ENDLOOP.
    Now I try to rewrite it for performance tunning using internal table  but I am getting 0 values. can't figure out whats the problem and been struggling fixing it.
    TYPES : begin of ty_DSO_TABLE,
             /N42/S_STRDCOST TYPE /N/ADSP_DSPC00-/N/S_STRDCOST,
             /N42/S_ITEMID TYPE /N/ADSP_DSPC00-/N/S_ITEMID,
           end of ty_DSO_TABLE.
    DATA: it_DSO_TABLE type hashed table of ty_DSO_TABLE with unique key
    /N/S_ITEMID,
         wa_DSO_TABLE type ty_DSO_TABLE.
    Field-symbols:  <rp> TYPE tys_TG_1.
    LOOP AT RESULT_PACKAGE assigning <rp>.
      clear wa_DSO_TABLE.
    Read table IT_DSO_TABLE into wa_DSO_TABLE with table key /N/S_ITEMID
      = <rp>-/N/S_ITEMID.
      if sy-subrc ne 0.
          select SUM( /N/S_STRDCOST )  into CORRESPONDING
          FIELDS OF wa_DSO_TABLE from
          /N/ADSP_DPIT00 WHERE /N/S_SALESITEM =  <rp>-/N/S_ITEMID AND
          /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
         if sy-subrc eq 0.
              <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
         endif.
    endif.
    ENDLOOP.
    Any idea whats wrong with the code
    thanks

    Hi Vaidya,
    According to the code which you have written, there is no value in table IT_DSO_TABLE when you are trying to read the values.And after the read statement you have given a condition for sy-subrc. Hence the select statement is actually not even getting executed. *Also you have not assigned the final value back to the ResultPackage.*_
    So Kindly correct your code as follows:
    Data: wa_dso type ty_DSO_TABLE.
    LOOP AT RESULT_PACKAGE assigning <rp>.
    clear wa_DSO_TABLE.
    select SUM( /N/S_STRDCOST ) into CORRESPONDING
    FIELDS OF wa_DSO_TABLE from
    /N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
    /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
    if sy-subrc eq 0.
    <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
    MODIFY RESULT_PACKAGE FROM <rp>.
    endif.
    ENDLOOP.
    Hope this helps you.
    Regards,
    Satyam

  • Using internal tables in BI 7 Start routines

    Hi All
    I tried searching for using internal tables in a start routine in BI 7 could not find the right pointers.
    This is what I am trying to do is the following:
    In a DSO ZSD_O01  I have a sales order and sales order item number and this DSO also contains the Contract number and the contract Item number.
    The DSO structure is as follows:
    /BIC/AZSD_O0100
    DOC_NUMBER
    ITEM
    CONTRACT
    CITEMNUM
    I want to read the data in this DSO into a internal table. But the key fields in this DSO is DOC_NUMBER and ITEM so I want to read this data into a internal table only for the first data package into the internal table. Thereafter I want to lookup into the internal table given the doc_number and ITEM to find the CONTRACT and CITEMNUM.
    Can any of you kindly show me how to :
    - Read data from a DSO into a internal table
    - Read the internal table for the first data package
    - How do I make the access in the internal table fast when my lookup in the internal table is not on the
      DSO key columns but on a different key column
    Appreciate your help
    Thanks
    Karen

    Hi Karen ,
    It will be helpful if you tell your requirement  as the approach you suggested is not looks convincing .May be their is some easy way and we can suggest you better approach
    -how to check for source_package = 1
    You need to hard code it .
    We decide package size at DTP level so you can declare a global variable .let say you have 50000 size of your  package then use global variable as counter and read only when record_count is <= 50000 .
    -how to declare the internal table so the values in it exists between different data packages
    Declare a global table and select data into it .A global table retain data across  the packages .
    - The key on which I need to lookup in the internal table is not the key fields as in the DSO
    Its ok .Let say you are doing lookup on A B and C field of DSO1 and the values may duplicate  in your source .then you just need to read the internal table having data from DSO2  with key field  A B C .
    Better if you set them as semantic keys at DTP level so that all  duplicate entries of A B  C will appear in same package .
    global Declarations
    In your start routine you will have this following code :
      TYPES:
          tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                            WITH NON-UNIQUE DEFAULT KEY.
    $$ begin of global - insert your declaration only below this line  -
    ...   insert your code here
    $$ end of global - insert your declaration only before this line   -
    One question
    Why you want to populate values for 1 source package only not for all ?This will be helpful to understand your requirement and may be we can fulfill it in some other manner .
    Regards,
    Jaya Tiwari

  • Is there any other option for using internal table in badi

    hi
    i know we cannot use internal table in badi
    but is der any other option
    plz write in d codez too
    with Regards
    Rohan Shetty
    Edited by: Rohan Shetty on May 6, 2008 2:14 PM

    of course you can use internal table in BAdi, do like this.
    data: itab type table of ....
    data: wa type ...
    Example:
    data: itab type (standard, sorted, hashed) table of mara.
    data: wa type mara.
    Or create your own type within the badi.
    types: begin of ty_xxx,
                fielda  type c,
                fieldb  type n,
                fieldc  type d.
    types: end   of ty_xxx
    data: itab type table of ty_xxx.
    data: wa type ty_xxx.
    Edited by: Micky Oestreich on May 6, 2008 2:16 PM

  • Selecting records from DB table with out using internal tables

    hi,
    i need to retrieve values from a database table based on few fields and date as well. however, i need to check whether the date is less or equal to the current date and along with that i should get the appropriate record. how can i do that with out using internal table.
    field1-----date---
    11111----
    20070219
    11111--20070214 <---
    11111----
    20070205
    in the above scenario i should get the second record
    Regards,
    Kranthi.

    Try:
    REPORT ztest MESSAGE-ID 00.
    TABLES bkpf.
    SELECT * FROM bkpf
      UP TO 1 ROWS
      WHERE budat <= sy-datum
      ORDER BY budat DESCENDING.
    ENDSELECT.
    Rob

  • Submititng the program to another program  using internal table values

    Hi All,
    How to Submit from one program to another program using internal table values minimum 7 int tables without using the seletion screen
    thanks
    raj

    Hi All,
    Thank you very much for your inputs.
    i am facing another issue:
    For each 10,000 records it should trigger a job  (we are trying to call a program)  were the validation will be done only through the other program.
    please find the code mentioned below :
    TABLES : but000.
    DATA:  int_bp LIKE but000 OCCURS 0 WITH HEADER LINE.
    data released like BTCH0000-CHAR1.
    DATA: jobnumber LIKE tbtcjob-jobcount, " Job ID and
          jobname LIKE tbtcjob-jobname, " job name.
          startdate LIKE tbtcjob-sdlstrtdt, " Start-time
          starttime LIKE tbtcjob-sdlstrttm, " window specs.
          laststartdate LIKE tbtcjob-laststrtdt,
          laststarttime LIKE tbtcjob-laststrttm,
          job_released LIKE btch0000-char1. " JOB_CLOSE: Was job released?
    DATA : l1 TYPE i,
           b_size TYPE i,
           b_cursor TYPE cursor.
    INITIALIZATION.
      b_size = 5000.
    START-OF-SELECTION.
      OPEN CURSOR WITH HOLD b_cursor
         FOR
         SELECT *
         FROM but000
         WHERE bpkind = 'AA'.
      IF sy-subrc = 0.
        DO.
          FETCH NEXT CURSOR b_cursor INTO TABLE int_bp
                                               PACKAGE SIZE b_size.
    Note : here in this point  we are getting a dump for the second job trigger.
          IF sy-subrc = 0.
            CLEAR jobname.
            CONCATENATE sy-repid sy-datum sy-uzeit INTO jobname.
    export int_bp to memory id 'ABC'.
            CALL FUNCTION 'JOB_OPEN'
                 EXPORTING
                      jobname          = jobname
                 IMPORTING
                      jobcount         = jobnumber.
                EXCEPTIONS
                     cant_create_job  = 1
                     invalid_job_data = 2
                     jobname_missing  = 3
                     OTHERS           = 4
    CALL FUNCTION 'JOB_SUBMIT'
          EXPORTING
               authcknam = sy-uname
               jobname   = jobname
               jobcount  = jobnumber
               report    = 'YTEST_RRR'.
               variant   = lv_variant.
       SUBMIT ytest_rrr
          VIA JOB jobname NUMBER jobnumber
          AND RETURN.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
           event_periodic                    = 'X'
            jobcount                          = jobnumber
            jobname                           = jobname
            strtimmed                         = 'X'
          IMPORTING
            job_was_released                  = released
            else.
            EXIT.
          ENDIF.
        ENDDO.
    calling program :
    REPORT YTEST_RRR .
    data itab1 like but000 occurs 0 with header line.
    data l type i.
    import itab1 from memory id 'ABC' .
    describe table itab1 lines l.
    free memory id 'ABC'.
    write:/ 'total records are:', l.
    Please give your suggestion why its going for  dump in the second iteration.
    thanks in advance.

  • Best way to declare and use internal table

    Hi all,
    As per my knoledge there are various techeniques (Methods) to declare and use the internal tables.
    Please Suggest me the Best way to declaring and using internal table ( WITH EXAMPLE ).
    Please Give the reason as well how the particular method is good ?
    What are benefits of particular method ?
    Thanks in advance.
    Regards
    Raj

    Hello Raj Ahir,
    There are so many methods to declare an internal table.
    Mainly I would like to explain 2 of them mostly used.
    1. Using Work Area and
    2. With header line.
    This with header line concept is not suggestable, because, when we shift the code to oops concept.. it doesn't work... Because OOPS doesn't support the Headerline concept...
    But it all depends on the situation.
    If you are sure that your program doen't make use of the OOPs concept, you can use HEADER LINE concept. If it invols OOPs use WORK AREA concept.
    Now I'l explain these two methods with an example each...
    1. Using Work area.
    TABLES: sflight.
    DATA: it_sflight TYPE TABLE OF sflight.
    DATA: wa_sflight LIKE LINE OF it_sflight.
    SELECT *
      FROM sflight
      INTO it_sflight
      WHERE <condition>.
      LOOP AT it_sflight INTO wa_sflight.
        WRITE / wa_sflight.
      ENDLOOP.
      In this case we have to transfer data into work area wa_sflight.
    We can't access the data from the internal table direclty without work
    area.
    *<===============================================
    2. Using Header line.
      DATA: BEGIN OF it_sflight OCCURS 0,
              carrid LIKE sflight-carrid,
              connid LIKE sflight-connid,
              fldate LIKE sflight-fldate,
            END OF it_sflight.
      SELECT *
        FROM sflight
        INTO it_sflight
        WHERE <condition>.
        LOOP AT it_sflight INTO wa_sflight.
          WRITE / wa_sflight.
        ENDLOOP.
    In this case we can directly access the data from the internal table.
    Here the internal table name represents the header. for each and every
    interation the header line will get filled with new data. If you want to
    represnent the internal table body you can use it_sflight[].
    *<======================================================
    TYPES: BEGIN OF st_sflight,
             carrid LIKE sflight-carrid,
             connid LIKE sflight-connid,
             fldate LIKE sflight-fldate,
           END OF st_sflight.
    DATA: it_sflight TYPE TABLE OF st_sflight,
          wa_sflight LIKE LINE OF it_sflight.
    This is using with work area.
    DATA: it_sflight LIKE sflight OCCURS 0 WITH HEADER LINE.
    This is using header line.
    <b>REWARD THE POINTS IF IT IS HELPFUL.</b>
    Regards
    Sasidhar Reddy Matli.
    Message was edited by: Sasidhar Reddy Matli
            Sasidhar Reddy Matli

  • Compare the elements data of the 2 context nodes using internal table

    Hi,
    How can i compare the elements data of the 2 context nodes using internal table?
    Regards,
    Ronita

    hi ronita,
    just get the nodes data into internal tables and just compare them......
    node1->get_static_attributes_table(importing table = ITAB_node1)
    node2->get_static_attributes_table(importing table = ITAB_node2)
    now u have the data of ur 2 context nodes in 2 different internal tables ..
    just compare them like
    if  ITAB_node1[ ] = ITAB_node2[ ].
    write: / 'itab1 is equal to itab2'..
    endif.
    and u can use as many as comparision operators between these 2 tables to compare them....
    regards....
    srini,,,,

  • Population of sales orders using internal tables

    I am trying to execute a program, where my requirement is to populate all the
    sales orders number using internal tables concept
    I am not sure, whether I am missing portion of logic or logic is incorrect
    Followed is the source code of my program
    tables: vbak.
    data: ztab like standard table of vbak with header line.
    parameters: z_vbeln like vbak-vbeln.
    select * from vbak into ztab where vbtyp = 'c'.
    append ztab.
    endselect.
    write: 30 'sales order' , 50 'order type', 60 'date' , 75 'time'.
    loop at ztab.
    write: /30 ztab-vbeln, 50 ztab-vbtyp, 60 ztab-erdat, 75 ztab-erzet.
    endloop.
    Thanks In Advance!!

    Hi Eshwer,
    Try following code. Use into table concept. It performancewise better than select ...endselect.
    TABLES : vbak.
    DATA : ztab LIKE STANDARD TABLE OF vbak WITH HEADER LINE.
    PARAMETERS : z_vbeln LIKE vbak-vbeln.
    SELECT  *
        INTO TABLE  ztab
        FROM vbak
       WHERE vbtyp = 'c'.
    ***You can add parameter z_vbeln in where clause if required****
    IF sy-subrc EQ 0.
    write: 30 'sales order' , 50 'order type', 60 'date' , 75 'time'.
    LOOP AT ztab.
    write: /30 ztab-vbeln,
              50 ztab-vbtyp,
              60 ztab-erdat,
              75 ztab-erzet.
    ENDLOOP.
    Regards,
    Anil Salekar

  • How to get around 34 fields to a final table to display in ALV grid

    Hi,
    I am working in a ALV grid report. I have to display around 34 fields in ALV grid. How to fatch all fields and appending into final internal table.
    SAP plant code          LIPS-WERKS
    Sales Order #      Sales document Numbers     VBAK-VBELN
    Delivery item Number          LIPS-POSNR
    PO # (Affiliate)     Purchase Order Numbers     VBKD-BSTKD
    SAP invoice #.     Invoice Number     VBRK-VBELN
    Ship-to-Customer No          KNA1--KUNNR
    Ship-to-Customer Name          KNA1-NAME1
    Ship-to-Customer Street           ADDR1_DATA u2013 STREET
    Ship-to-Customer house number           ADDR1_DATA- HOUSE_NUM1 
    Ship-to-Customer City           ADDR1_DATA- CITY1
    Ship-to-Customer Region          ADDR1_DATA- REGION
    Ship-to-Customer Postal code          ADDR1_DATA- POST_CODE1
    Ship-to-Customer Country          ADDR1_DATA- COUNTRY
    Bill-to customer no           KNA1-KUNNR
    Bill-to customer name           KNA1-NAME1
    Bill-to-Customer Street           ADDR1_DATA u2013 STREET
    Bill-to-Customerhouse number           ADDR1_DATA- HOUSE_NUM1 
    Bill -to-Customer City           ADDR1_DATA- CITY1
    Bill-to-Customer Region          ADDR1_DATA- REGION
    Bill-to-Customer Postal code          ADDR1_DATA- POST_CODE1
    Bill-to-Customer Country          ADDR1_DATA- COUNTRY
    Material Code          LIPS-MATNR
    Material Description          LIPS-ARKTX 
    Delivered Quantity          LIPS-LFIMG
    Unit of Measure          LIPS-MEINS
    Invoiced Quantity          VBRP-FKIMG
    unit ICB price          vbrp-netwr /vbrp-fkimg
    Line item Value (ICB Price)          VBRP-NETWR
    Currency          VBRK- WAERK
    Country Of Origin          EIPO_HERKL
    Date of Shipment          LIKP-WADAT_IST
    Total Gross Weight          LIKP- BTGEW
    Unit of Measure          LIKP- GEWEI
    Total Dollar Value of Invoice          VBRK- NETWR
    Currency          VBRK-WAERK
    Waiting quick response with any example
    Regards
    Dhar

    the only way by which u can do is by linking all these tables together using their primary keys.
    so start finding the primary key and link the tables and then append all these values into one master internal table.
    pk

  • SWAP COLUMNS AND ROW IN AN INTERNAL TABLE to display in ALV

    Hi ,
    I want to swap all the rows in an internal table with the column of the internal table to display it horizontally in ALV grid.
    e.g
    1     2   3  (field names)
    A    P   X
    B    Q   Y
    C    R    Z
    should look like :
    D       A   B     C
    E      P   Q    R
    F       X    Y    Z
    Where D , E, F in first column is already apended in new table.
    Or else is there a way to rotate the ALV grid so that it can display rows as columns & columns as rows.
    regards

    hi,
    i have an internal table which is like
    f1  f2 f3  f4 (column header)
    A  1  2   3
    B  4  5   6
    C  7  8   9
    the values in o/p table should be
    A B C  ( column header)
    1  4 7 
    2  5 8
    3  6 9
    Please help!!

  • ALV - need to sum values of internal table and display in ALV

    I have data in internal table as:
    Material     date     sum1     sum2
    Mat_A     19990101     4     4
    Mat_A     20080501     3     0
    Mat_A     20080601     2     0
    Mat_B     19990101     2     0
    Mat_B     20080601     5     5
    Required output is :
    Material     qty1     qty2     19990101     20080501     20080601
    Mat_A     432     4     4     3     2
    Mat_B     2+5     5     2           5
    Thinking of using ALV to pass the internal table and display as classical report (and also to save as excel spreadsheet).
    Counting your help on the following questions:
    1) How to accomplish the sum in ALV report? Can ALV FM do that or one has to use ABAP to compute the sum from the given internal table?
    2) Mat_A can have more date values. Here it got 3 distinct date values 19990101, 20080601, 20080501. If it has say 5 date values, how to create the ALV date columns (from 3 to 5 date columns) dynamically?
    Thanks for the help.

    for the sum inalv we use generally..
    it_fieldcat-do_sum = 1.
    check this examples...
    http://www.****************/Tutorials/ALV/Subtotals/text.htm
    *& Report  ZTEST_ALV_PERC_13317
    REPORT  ztest_alv_perc_13317.
    TYPE-POOLS: slis.
    DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
          wa_fieldcat TYPE slis_fieldcat_alv,
          it_events TYPE slis_t_event,
          wa_events TYPE slis_alv_event,
          it_sort TYPE slis_t_sortinfo_alv,
          wa_sort TYPE slis_sortinfo_alv,
          l_layout TYPE slis_layout_alv.
    TYPES: BEGIN OF ty_itab,
            field1(10),
            qty1 TYPE i,
            qty2 TYPE i,
            qty3 TYPE i,
            dummy TYPE c,
          END OF ty_itab.
    DATA: itab TYPE STANDARD TABLE OF ty_itab WITH  HEADER LINE,
    itab1 TYPE ty_itab.
    START-OF-SELECTION.
      itab-field1 = 'FIRST'.
      itab-qty1 = 2.
      itab-qty2 = 1.
      itab-qty3 = 5.
      itab-dummy = 10.
      APPEND itab.
      itab-field1 = 'FIRST'.
      itab-qty1 = 2.
      itab-qty2 = 1.
      itab-qty3 = 5.
      itab-dummy = 10.
      APPEND itab.
      itab-field1 = 'FIRST'.
      itab-qty1 = 2.
      itab-qty2 = 1.
      itab-qty3 = 5.
      itab-dummy = 10.
      APPEND itab.
      wa_fieldcat-col_pos = 1.
      wa_fieldcat-fieldname = 'FIELD1'.
      wa_fieldcat-tabname = 'ITAB'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-col_pos = 2.
      wa_fieldcat-fieldname = 'QTY1'.
      wa_fieldcat-tabname = 'ITAB'.
      wa_fieldcat-do_sum = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-col_pos = 3.
      wa_fieldcat-fieldname = 'QTY2'.
      wa_fieldcat-tabname = 'ITAB'.
      wa_fieldcat-do_sum = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-col_pos = 4.
      wa_fieldcat-fieldname = 'QTY3'.
      wa_fieldcat-tabname = 'ITAB'.
      wa_fieldcat-do_sum = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-col_pos = 5.
      wa_fieldcat-fieldname = 'DUMMY'.
      wa_fieldcat-tabname = 'ITAB'.
      wa_fieldcat-do_sum = 'X'.
      wa_fieldcat-no_out = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
       CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = it_events
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
         i_callback_program           = sy-repid
         it_fieldcat                    = it_fieldcat
        TABLES
          t_outtab                       = itab
    EXCEPTIONS
       program_error                  = 1
       OTHERS                         = 2
      IF sy-subrc <> 0.
      ENDIF.

  • Internal table with the filtered ALV records ?

    Hi friends,
    I have a standard ALV showing for example 10 lines. After using standard filter ALV option,
    I only have 5 lines. Is there any internal table where I have these 5 displayed lines ?
    Or how could I get them ?
    thanks

    Hi,
    You can use FM 'REUSE_ALV_GRID_LAYOUT_INFO_GET', like this:
    call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_user_command          = 'USER_COMMAND'
           tables
                 t_outtab                        = data_tab
    form user_command using r_ucomm like sy-ucomm s_selfield type slis_selfield.
        refresh i_filtered.
        CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
          IMPORTING
            ET_FILTERED_ENTRIES = i_filtered
          EXCEPTIONS
            OTHERS = 1.
      loop at data_tab.
         read table i_filtered with key = sy-tabix transporting no fields.
         if sy-subrc NE 0.
    *           Line of data_tab is visible
         endif.
      endloop.
    ENDFORM.
    In the I_FILTERED table are the records of data_tab that are NOT visible (are filtered).
    Best regards,
    Leandro Mengue

  • How to call Subroutines,Standard Text  & using Internal Table in SmartForm

    Hi all,
    need help in the following areas.Its very urgent!
    1.How to CAll Subroutines in Smart Forms
    2.How to CAll Standard Text in Smart Forms
    Situation:
    We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
    Any Help in this direction would be highly appreciated.
    Regards
    Ramu

    Hi,
      When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
    Specifying a Currency or Quantity Reference
    Use
    In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
    ·        If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
    ·        If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
    In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
    Procedure
    You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
           1.      Create the reference to the currency field by entering the following values:
    -         Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
    -         Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
           2.      Under Data Type, specify whether the data type is a currency or quantity.
    Result
    In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
    Thanks and Regards,
    Bharat Kumar Reddy.V
    Message was Added by: Bharat Reddy V
    Message was Added by: Bharat Reddy V

Maybe you are looking for

  • Call (consume) a webservice from ABAP for dummies

    Hi I find the documentation for this topic very confusing. It a badly structured mix of documentation of client scenarios, server scenarios and worst of all a lot of XI nonsense. I need purely client scenario documentation without any info about XI a

  • How create a database connection only one for lot of AM

    Hi , In My Application am having lot of Application module its containing database connection per AM its connecting to same database only if i want to make it unique connction how i can proceed. which is correct way any one can help me Thanks Prabeet

  • Adobe flash not working with surface RT. How do i get this working

    i have windows 8 on my surface rt and my adobe flash seems not to be working. i have added to my compability sites and have the most to date version. what can i do to have this working?

  • Firefox shuts down within seconds of opening

    Firefox shuts down within seconds of opening any web page. Same problem in Firefox safe mode. I have unchecked hardware acceleration. I have uninstalled, removed all data files, deleted all profiles and reinstalled Firefox. Internet Explorer works fi

  • Windows 2003 and windows 2008 for applications server

    hi all. i want to know about windows that which one is better for application server 10 R2. which one is better windows server 2003 or windows 2008? please if anyone knows about the difference and about the performance please help me out thanks. Any