Using Internal table in select queries

Hi All,
In the below mentioned code, i am reading an internal table and using the GUID i am fetching values from the database table and populating another internal table.
SELECT BUT000~PARTNER AS RESP_GROUP
      FROM BUT000 INTO CORRESPONDING FIELDS OF TABLE itab_Partner
      FOR ALL ENTRIES IN itab_PartnerGUID
      WHERE BUT000~PARTNER_GUID = itab_PartnerGUID-GUID.
This code statement doesn't give any syntax error. But if i have to return values say from the itab as well as database table... then should it be something like...
SELECT itab_PartnerGUID-GUID as GUID
               BUT000~PARTNER AS RESP_GROUP
      FROM BUT000 INTO CORRESPONDING FIELDS OF TABLE itab_Partner
      FOR ALL ENTRIES IN itab_PartnerGUID
      WHERE BUT000~PARTNER_GUID = itab_PartnerGUID-GUID.
This statement throws an error saying "Unknown column name itab_PartnerGUID-GUID; not determined until runtime' .... what is the issue? can't i use the internal table that way? what is the right syntax to get the results.... please help....
Ramya G

Wow.. Chandrashekar.... that was an amazing catch in the code... you are rite.. when i am equating itab_PartnerGUID-GUID to BUT000PARTNER_GUID, i can as well use the BUT000PARTNER_GUID.... makes complete sense.....
but there's a problem, its a mistake in the query.... the query shd actuall be this:
SELECT itab_PartnerGUID-GUID as GUID
BUT000~PARTNER AS RESP_GROUP
FROM BUT000 INTO CORRESPONDING FIELDS OF TABLE itab_Partner
FOR ALL ENTRIES IN itab_PartnerGUID
WHERE BUT000~PARTNER_GUID = itab_PartnerGUID-PARTNER_GUID.
the internal table itab_PartnerGUID has 2 fields GUID and PARTNERGUID... in the where condition of the query i need to use PARTNERGUID, but in select i need to return GUID... how shd i do it? please help...

Similar Messages

Selecting records from DB table with out using internal tables

hi,
i need to retrieve values from a database table based on few fields and date as well. however, i need to check whether the date is less or equal to the current date and along with that i should get the appropriate record. how can i do that with out using internal table.
field1-----date---
11111----
20070219
11111--20070214 <---
11111----
20070205
in the above scenario i should get the second record
Regards,
Kranthi.

Try:
REPORT ztest MESSAGE-ID 00.
TABLES bkpf.
SELECT * FROM bkpf
UP TO 1 ROWS
WHERE budat <= sy-datum
ORDER BY budat DESCENDING.
ENDSELECT.
Rob

Abap Logic for performance tuning not working when using Internal tables

Hi,
I wrote this piece of code that is working correctly that is select SUM of cost from DSO where Plant is the same for Sales Items.
LOOP AT RESULT_PACKAGE INTO rp.
SELECT SUM( /N/S_STRDCOST ) FROM /N/ADSP_DPIT00 INTO
rp-/N/S_STRDCOST
WHERE /N42/S_SALESITEM = rp-/N42/S_ITEMID AND /N42/S_PLPLANT EQ
rp-/N42/S_SOURCE.
MODIFY RESULT_PACKAGE FROM rp.
Clear rp.
ENDLOOP.
Now I try to rewrite it for performance tunning using internal table but I am getting 0 values. can't figure out whats the problem and been struggling fixing it.
TYPES : begin of ty_DSO_TABLE,
 /N42/S_STRDCOST TYPE /N/ADSP_DSPC00-/N/S_STRDCOST,
 /N42/S_ITEMID TYPE /N/ADSP_DSPC00-/N/S_ITEMID,
 end of ty_DSO_TABLE.
DATA: it_DSO_TABLE type hashed table of ty_DSO_TABLE with unique key
/N/S_ITEMID,
 wa_DSO_TABLE type ty_DSO_TABLE.
Field-symbols: <rp> TYPE tys_TG_1.
LOOP AT RESULT_PACKAGE assigning <rp>.
clear wa_DSO_TABLE.
Read table IT_DSO_TABLE into wa_DSO_TABLE with table key /N/S_ITEMID
= <rp>-/N/S_ITEMID.
if sy-subrc ne 0.
 select SUM( /N/S_STRDCOST ) into CORRESPONDING
 FIELDS OF wa_DSO_TABLE from
 /N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
 /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
 if sy-subrc eq 0.
 <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
 endif.
endif.
ENDLOOP.
Any idea whats wrong with the code
thanks

Hi Vaidya,
According to the code which you have written, there is no value in table IT_DSO_TABLE when you are trying to read the values.And after the read statement you have given a condition for sy-subrc. Hence the select statement is actually not even getting executed. *Also you have not assigned the final value back to the ResultPackage.*_
So Kindly correct your code as follows:
Data: wa_dso type ty_DSO_TABLE.
LOOP AT RESULT_PACKAGE assigning <rp>.
clear wa_DSO_TABLE.
select SUM( /N/S_STRDCOST ) into CORRESPONDING
FIELDS OF wa_DSO_TABLE from
/N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
/N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
if sy-subrc eq 0.
<rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
MODIFY RESULT_PACKAGE FROM <rp>.
endif.
ENDLOOP.
Hope this helps you.
Regards,
Satyam

Using internal tables in BI 7 Start routines

Hi All
I tried searching for using internal tables in a start routine in BI 7 could not find the right pointers.
This is what I am trying to do is the following:
In a DSO ZSD_O01 I have a sales order and sales order item number and this DSO also contains the Contract number and the contract Item number.
The DSO structure is as follows:
/BIC/AZSD_O0100
DOC_NUMBER
ITEM
CONTRACT
CITEMNUM
I want to read the data in this DSO into a internal table. But the key fields in this DSO is DOC_NUMBER and ITEM so I want to read this data into a internal table only for the first data package into the internal table. Thereafter I want to lookup into the internal table given the doc_number and ITEM to find the CONTRACT and CITEMNUM.
Can any of you kindly show me how to :
- Read data from a DSO into a internal table
- Read the internal table for the first data package
- How do I make the access in the internal table fast when my lookup in the internal table is not on the
DSO key columns but on a different key column
Appreciate your help
Thanks
Karen

Hi Karen ,
It will be helpful if you tell your requirement as the approach you suggested is not looks convincing .May be their is some easy way and we can suggest you better approach
-how to check for source_package = 1
You need to hard code it .
We decide package size at DTP level so you can declare a global variable .let say you have 50000 size of your package then use global variable as counter and read only when record_count is <= 50000 .
-how to declare the internal table so the values in it exists between different data packages
Declare a global table and select data into it .A global table retain data across the packages .
- The key on which I need to lookup in the internal table is not the key fields as in the DSO
Its ok .Let say you are doing lookup on A B and C field of DSO1 and the values may duplicate in your source .then you just need to read the internal table having data from DSO2 with key field A B C .
Better if you set them as semantic keys at DTP level so that all duplicate entries of A B C will appear in same package .
global Declarations
In your start routine you will have this following code :
TYPES:
 tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
 WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... insert your code here
$$ end of global - insert your declaration only before this line -
One question
Why you want to populate values for 1 source package only not for all ?This will be helpful to understand your requirement and may be we can fulfill it in some other manner .
Regards,
Jaya Tiwari

Submititng the program to another program using internal table values

Hi All,
How to Submit from one program to another program using internal table values minimum 7 int tables without using the seletion screen
thanks
raj

Hi All,
Thank you very much for your inputs.
i am facing another issue:
For each 10,000 records it should trigger a job (we are trying to call a program) were the validation will be done only through the other program.
please find the code mentioned below :
TABLES : but000.
DATA: int_bp LIKE but000 OCCURS 0 WITH HEADER LINE.
data released like BTCH0000-CHAR1.
DATA: jobnumber LIKE tbtcjob-jobcount, " Job ID and
      jobname LIKE tbtcjob-jobname, " job name.
      startdate LIKE tbtcjob-sdlstrtdt, " Start-time
      starttime LIKE tbtcjob-sdlstrttm, " window specs.
      laststartdate LIKE tbtcjob-laststrtdt,
      laststarttime LIKE tbtcjob-laststrttm,
      job_released LIKE btch0000-char1. " JOB_CLOSE: Was job released?
DATA : l1 TYPE i,
       b_size TYPE i,
       b_cursor TYPE cursor.
INITIALIZATION.
b_size = 5000.
START-OF-SELECTION.
OPEN CURSOR WITH HOLD b_cursor
     FOR
     SELECT *
     FROM but000
     WHERE bpkind = 'AA'.
IF sy-subrc = 0.
    DO.
      FETCH NEXT CURSOR b_cursor INTO TABLE int_bp
                                           PACKAGE SIZE b_size.
Note : here in this point we are getting a dump for the second job trigger.
      IF sy-subrc = 0.
        CLEAR jobname.
        CONCATENATE sy-repid sy-datum sy-uzeit INTO jobname.
export int_bp to memory id 'ABC'.
        CALL FUNCTION 'JOB_OPEN'
             EXPORTING
                  jobname          = jobname
             IMPORTING
                  jobcount         = jobnumber.
            EXCEPTIONS
                 cant_create_job = 1
                 invalid_job_data = 2
                 jobname_missing = 3
                 OTHERS           = 4
CALL FUNCTION 'JOB_SUBMIT'
      EXPORTING
           authcknam = sy-uname
           jobname   = jobname
           jobcount = jobnumber
           report    = 'YTEST_RRR'.
           variant   = lv_variant.
   SUBMIT ytest_rrr
      VIA JOB jobname NUMBER jobnumber
      AND RETURN.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
       event_periodic                    = 'X'
        jobcount                          = jobnumber
        jobname                           = jobname
        strtimmed                         = 'X'
      IMPORTING
        job_was_released                  = released
        else.
        EXIT.
      ENDIF.
    ENDDO.
calling program :
REPORT YTEST_RRR .
data itab1 like but000 occurs 0 with header line.
data l type i.
import itab1 from memory id 'ABC' .
describe table itab1 lines l.
free memory id 'ABC'.
write:/ 'total records are:', l.
Please give your suggestion why its going for dump in the second iteration.
thanks in advance.

Best way to declare and use internal table

Hi all,
As per my knoledge there are various techeniques (Methods) to declare and use the internal tables.
Please Suggest me the Best way to declaring and using internal table ( WITH EXAMPLE ).
Please Give the reason as well how the particular method is good ?
What are benefits of particular method ?
Thanks in advance.
Regards
Raj

Hello Raj Ahir,
There are so many methods to declare an internal table.
Mainly I would like to explain 2 of them mostly used.
1. Using Work Area and
2. With header line.
This with header line concept is not suggestable, because, when we shift the code to oops concept.. it doesn't work... Because OOPS doesn't support the Headerline concept...
But it all depends on the situation.
If you are sure that your program doen't make use of the OOPs concept, you can use HEADER LINE concept. If it invols OOPs use WORK AREA concept.
Now I'l explain these two methods with an example each...
1. Using Work area.
TABLES: sflight.
DATA: it_sflight TYPE TABLE OF sflight.
DATA: wa_sflight LIKE LINE OF it_sflight.
SELECT *
FROM sflight
INTO it_sflight
WHERE <condition>.
LOOP AT it_sflight INTO wa_sflight.
 WRITE / wa_sflight.
ENDLOOP.
In this case we have to transfer data into work area wa_sflight.
We can't access the data from the internal table direclty without work
area.
*<===============================================
2. Using Header line.
DATA: BEGIN OF it_sflight OCCURS 0,
 carrid LIKE sflight-carrid,
 connid LIKE sflight-connid,
 fldate LIKE sflight-fldate,
 END OF it_sflight.
SELECT *
 FROM sflight
 INTO it_sflight
 WHERE <condition>.
 LOOP AT it_sflight INTO wa_sflight.
 WRITE / wa_sflight.
 ENDLOOP.
In this case we can directly access the data from the internal table.
Here the internal table name represents the header. for each and every
interation the header line will get filled with new data. If you want to
represnent the internal table body you can use it_sflight[].
*<======================================================
TYPES: BEGIN OF st_sflight,
 carrid LIKE sflight-carrid,
 connid LIKE sflight-connid,
 fldate LIKE sflight-fldate,
 END OF st_sflight.
DATA: it_sflight TYPE TABLE OF st_sflight,
 wa_sflight LIKE LINE OF it_sflight.
This is using with work area.
DATA: it_sflight LIKE sflight OCCURS 0 WITH HEADER LINE.
This is using header line.
REWARD THE POINTS IF IT IS HELPFUL.
Regards
Sasidhar Reddy Matli.
Message was edited by: Sasidhar Reddy Matli
 Sasidhar Reddy Matli

Population of sales orders using internal tables

I am trying to execute a program, where my requirement is to populate all the
sales orders number using internal tables concept
I am not sure, whether I am missing portion of logic or logic is incorrect
Followed is the source code of my program
tables: vbak.
data: ztab like standard table of vbak with header line.
parameters: z_vbeln like vbak-vbeln.
select * from vbak into ztab where vbtyp = 'c'.
append ztab.
endselect.
write: 30 'sales order' , 50 'order type', 60 'date' , 75 'time'.
loop at ztab.
write: /30 ztab-vbeln, 50 ztab-vbtyp, 60 ztab-erdat, 75 ztab-erzet.
endloop.
Thanks In Advance!!

Hi Eshwer,
Try following code. Use into table concept. It performancewise better than select ...endselect.
TABLES : vbak.
DATA : ztab LIKE STANDARD TABLE OF vbak WITH HEADER LINE.
PARAMETERS : z_vbeln LIKE vbak-vbeln.
SELECT *
    INTO TABLE ztab
    FROM vbak
   WHERE vbtyp = 'c'.
***You can add parameter z_vbeln in where clause if required****
IF sy-subrc EQ 0.
write: 30 'sales order' , 50 'order type', 60 'date' , 75 'time'.
LOOP AT ztab.
write: /30 ztab-vbeln,
          50 ztab-vbtyp,
          60 ztab-erdat,
          75 ztab-erzet.
ENDLOOP.
Regards,
Anil Salekar

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

Report using internal table events

Hi,
i have an internal table with the fields 1. profitcenter 2. company code 3. gl account 4. amount
for each profit center i need to seggregate accounts based on company code.
the report should look like the one below.
please suggest some code using internal table events at new , at end etc. as im not using alv. your help will be rewarded
regards,
ravi.
-Profitcenter-companycodeglaccount-amount---
-pfcenter1----
glaccount1-1000---
glaccount2-2000---
4444-total--3000---
glaccount1-4000---
glaccount2-1000---
3333-total--5000---
-profitcentre1*total8000---
profitcentre2.........

Hi.
TYPES: BEGIN OF G_I_DATA,
         PROFIT(4)   TYPE C,
         COMPANY(4) TYPE C,
         ACCOUNT(10) TYPE C,
         AMOUNT      TYPE P,
       END OF G_I_DATA.
DATA: G_IT_DATA TYPE TABLE OF G_I_DATA,
      G_WA_DATA TYPE G_I_DATA.
DATA: G_SUM_COMPANY TYPE P,
      G_SUM_PROFIT   TYPE P,
      G_AMOUNT       TYPE P.
G_WA_DATA-PROFIT = '0001'.
G_WA_DATA-COMPANY = '1111'.
G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
G_WA_DATA-AMOUNT = 2000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0001'.
G_WA_DATA-COMPANY = '1111'.
G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
G_WA_DATA-AMOUNT = 3000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0001'.
G_WA_DATA-COMPANY = '2222'.
G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
G_WA_DATA-AMOUNT = 4000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0001'.
G_WA_DATA-COMPANY = '2222'.
G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
G_WA_DATA-AMOUNT = 5000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0002'.
G_WA_DATA-COMPANY = '1111'.
G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
G_WA_DATA-AMOUNT = 2000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0002'.
G_WA_DATA-COMPANY = '1111'.
G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
G_WA_DATA-AMOUNT = 3000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0002'.
G_WA_DATA-COMPANY = '2222'.
G_WA_DATA-ACCOUNT = 'ACCOUNT1'.
G_WA_DATA-AMOUNT = 4000.
APPEND G_WA_DATA TO G_IT_DATA.
G_WA_DATA-PROFIT = '0002'.
G_WA_DATA-COMPANY = '2222'.
G_WA_DATA-ACCOUNT = 'ACCOUNT2'.
G_WA_DATA-AMOUNT = 5000.
APPEND G_WA_DATA TO G_IT_DATA.
SORT G_IT_DATA BY PROFIT COMPANY ACCOUNT.
WRITE: /6 'ProfitCenter', 20 'CompanyCode',
          34 'Glaccount', 48 'Amount'.
WRITE: /6 SY-ULINE(50).
LOOP AT G_IT_DATA INTO G_WA_DATA.
    AT NEW PROFIT.
      WRITE: /6 G_WA_DATA-PROFIT.
    ENDAT.
    G_AMOUNT = G_WA_DATA-AMOUNT.
    AT NEW ACCOUNT.
      WRITE: /34 G_WA_DATA-ACCOUNT,
             48 G_AMOUNT.
    ENDAT.
    G_SUM_PROFIT = G_SUM_PROFIT + G_WA_DATA-AMOUNT.
    G_SUM_COMPANY = G_SUM_COMPANY + G_WA_DATA-AMOUNT.
    AT END OF COMPANY.
      WRITE: /20 G_WA_DATA-COMPANY,
              34 'Totle',
              48 G_SUM_COMPANY.
      CLEAR G_SUM_COMPANY.
      WRITE: /6 '*******'.
    ENDAT.
    AT END OF PROFIT.
      WRITE: /6 G_WA_DATA-PROFIT,
              20 'Totle',
              48 G_SUM_PROFIT.
      CLEAR G_SUM_PROFIT.
      WRITE: /6 '*************************************'.
    ENDAT.
ENDLOOP.

Is there any other option for using internal table in badi

hi
i know we cannot use internal table in badi
but is der any other option
plz write in d codez too
with Regards
Rohan Shetty
Edited by: Rohan Shetty on May 6, 2008 2:14 PM

of course you can use internal table in BAdi, do like this.
data: itab type table of ....
data: wa type ...
Example:
data: itab type (standard, sorted, hashed) table of mara.
data: wa type mara.
Or create your own type within the badi.
types: begin of ty_xxx,
            fielda type c,
            fieldb type n,
            fieldc type d.
types: end   of ty_xxx
data: itab type table of ty_xxx.
data: wa type ty_xxx.
Edited by: Micky Oestreich on May 6, 2008 2:16 PM

Using plsql tables in select statement of report query

Hi
Anyone have experience to use plsql table to select statement to create a report. In otherwords, How to run report using flat file (xx.txt) information like 10 records in flat files and use this 10 records to the report and run pdf files.
thanks in advance
suresh

hi,
u can use the utl_file package to do that using a ref cursor query in the data model and u can have this code to read data from a flat file
declare
ur_file utl_file.file_type;
my_result varchar2(250);
begin
ur_file := UTL_FILE.FOPEN ('&directory', '&filename', 'r') ;
utl_file.get_line(ur_file, my_result);
dbms_output.put_line(my_result);
utl_file.fclose(ur_file);
end;
make sure u have an entry in ur init.ora saying that your
utl_file_dir = '\your directory where ur files reside'
cheers!
[email protected]

Compare the elements data of the 2 context nodes using internal table

Hi,
How can i compare the elements data of the 2 context nodes using internal table?
Regards,
Ronita

hi ronita,
just get the nodes data into internal tables and just compare them......
node1->get_static_attributes_table(importing table = ITAB_node1)
node2->get_static_attributes_table(importing table = ITAB_node2)
now u have the data of ur 2 context nodes in 2 different internal tables ..
just compare them like
if ITAB_node1[ ] = ITAB_node2[ ].
write: / 'itab1 is equal to itab2'..
endif.
and u can use as many as comparision operators between these 2 tables to compare them....
regards....
srini,,,,

Create select-options using internal table

Hello,
I have number of table-fields in one internal table.
I need to create select-options on screen for each of the table field in that internal table.
Can anybody please provide a code for it ?
Thanks.

hi,
you can create in this way :
select-options: <name> for itab-<field name>.
example code:
TABLES: vbak. " standard table
TYPE-POOLS: slis.
*-- Structure to hold data from table
TYPES: BEGIN OF tp_itab1,
 vbeln LIKE vbap-vbeln,
 posnr LIKE vbap-posnr,
 werks LIKE vbap-werks,
 lgort LIKE vbap-lgort,
 END OF tp_itab1.
*-- Data Declaration
DATA: t_itab1 TYPE TABLE OF tp_itab1.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
* Selection Screen *
*--Sales document-block
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
 s_posnr FOR vbap-posnr,
 s_werks FOR vbap-werks,
 s_lgort FOR vbap-lgort.*
SELECTION-SCREEN END OF BLOCK b1.
hope it will help you
regards
Rahul sharma
Edited by: RAHUL SHARMA on Sep 19, 2008 8:25 AM

Submit report using internal table

Hi Experts!!,
REPORT 1
TYPES:   BEGIN OF ty_out_table,
         partner LIKE /sapsll/pntbp-partner,
         bpvsy   LIKE /sapsll/pntbp-bpvsy,
         country LIKE adrc-country,
        END OF ty_out_table.
internal table declaration & definition
DATA: gt_out_table TYPE STANDARD TABLE OF ty_out_table
               WITH KEY partner
                        bpvsy.
I have data in internal table gt_out_table.
I want to pass data gt_out_table in report 2. using SUBMIT REPORT.
How to do that ?
REPORT 2
select-options: s_partnr for /sapsll/pntbp-bpvsy.
parameters: p_upd,
                  p_value .
please suggest.
Thanks
Anee

hai,
... WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.

How to use internal table in Exporting Parameter of method.

Hi Friends,
I am new to abap oops and using the following code to read a select-option and pass the data in an internal table but on defining
internal table of a standard type it is giving me following error :
ITAB is not an internal table - the OCCURS n specification is missing.
code
====
class lcl_get_details DEFINITION.
    PUBLIC SECTION.
      types : r_carrid type RANGE OF sflight-carrid.
      data : itab type STANDARD TABLE OF sflight.
      METHODS : get_data IMPORTING s_carrid type R_carrid
                         EXPORTING itab type sflight.
ENDCLASS.
class lcl_get_details IMPLEMENTATION.
METHOD get_data.
    select *
    from sflight
    into table itab
    where carrid in s_carrid.
    if sy-subrc eq 0.
      sort itab by carrid.
    endif.
endmethod.
ERROR : ITAB is not an internal table - the OCCURS n specification is missing.
Kindly help.

Hi,
I think your problem is, because you use 2 variables named ITAB in method get_data.
Instance-variable ITAB is defined as STANDARD TABLE OF sflight.
Exporting-parameter ITAB is defined as sflight.
It seems like in implementation of get_data exporting-parameter ITAB is used.
Try this implementation:
METHOD get_data.
select * from sflight into table me->itab
   where carrid in s_carrid.
if sy-subrc eq 0.
sort me->itab by carrid.
endif.
ENDMETHOD.
This should solve your compiler error.
Nether the less, get_data will yield an empty structure as result.
Regards, Hubert
Edited by: Hubert Heitzer on Feb 24, 2010 10:22 AM

Using Internal table in select queries

Similar Messages

Maybe you are looking for