Using internet with wifi

How do you use the internet with wifi so that you don't need to have the data plan?

please read this article from the public knowledge base:
Article ID: KB14396 How to access BlackBerry services that use Wi-Fi technology with only a voice service plan
To sum up, you can't use Wi-Fi on a BlackBerry smartphone without the BlackBerry data plan.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

No internet with WiFi

Cannot connect to the internet with WiFi other than my own. With all other networks, I connect to WiFi, but not the modem. Getting a message that "WiFi has the self assigned IP address 169.254.3.132 and will not be able to connect to the internet." Using a 13" MBA, 2011, 1.8 i7, Mavericks 10.9.3. This is a recent problem, have used this machine for years with no issue. Help.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook air 2011 so slow speed to visit Internet with WIFI

I bought Mac book air 2011 13' inch core i5 last week. Recently, I found it is sooooo slow to visit
internet with WIFI, even I cannot open the any website with Safari..........
Is there anyone the same to me?????

Hi,
i solved the problem this way,
first reset PRAM (google for "reset PRAM lion" if you don't know how = restart and immediately push these buttons simultanously [option] [cmd] [P] [R] )
then
in network prefs, uncheck "ask for confirmation when connecting to other networks"
(or something of that kind, i don't use the english version)
this solved my problem
hope it will help you as well
give peace a chance

Well I have a question. Why my New iPad is so hot within 30 minutes.i used internet from wifi and playing game 3d or 2d . It

Well I have a question. Why my New iPad is so hot within 30 minutes.i used internet from wifi and playing game 3d or 2d . It's appear after I upgrade to IOS6. Why?

It's normal for the iPad or any similar device to get warm when it's under heavy load. If it gets too warm, it will shut itself off and show a disabled message.
Take a look at this Apple doc -> Phone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
If you believe it's hotter than normal, make a reservation with a Genius.

How ca i use my ipod 4th gen by using internet not wifi?

how can i use my ipod 4th gen by using internet not wifi?

Ipod connects to the internet via wi-fi ONLY.

Use safari with wifi

When I use safari with wifi, my ipad always reopen
I do not know what is the problem with ipad?
someone can help me to solve the promblem!!

Update: worked fine with free hilton wfi. Splash/redirect page loaded fine
Then failed to work again, this time with reagan airport wifi. After 30 mins on phone with apple support just mindlessly reading me through the generic support tips i already tried that didnt work, they gave up.
Now at marriott and redirect page worked and free wifi running with no problems.
How is it that i can be sitting next to someone at the airports that also has an ipad2 and they can connect fine and i cant??????? Are there really no solutions available?
And why is the final apple support suggestion from help desk to have the network router admin reset their router? 1) obviously not going to happen at public access points and 2) shouldnt apple design a product that can access these basic wifi interfaces that will commonly be encountered when using wifi without the need for network admin intervention????

Stops working when using it with wifi antenna adapter. Good with 3.6 but now that I have 5 I can't find how to change back.

I live on a boat so I use a wifi antenna adapter to get internet. I used mozilla 3.6 until 5 came out and I updated. After that my internet stops more so I called the manufacturer and he said it doesn't work well with Mozilla 5 and I should change back to 3.6. Its not that it stops so much as when it does stop, I need to access the program that can change the source of the internet connection and with 5.0, it won't open the program so I can't use it. I tried to download 3.6 again and can't find it to download. Now I have to use internet explorer which I don't like.

Hi Cynthia,
Welcome to Adobe forum.
In order to install your Photoshop CC you will have to install Creative Cloud app.
To install it please visit below given link and login with your ID:
www.creative.adobe.com
Once logged in on top left corner you will have an option 'Download Center', please click on that and Download an app named Creative Cloud.
Once its downloaded please install it and open it, once it is opened please go to 'Apps' tab and then you will see all the software's to install.
Please look for Photoshop CC and click on Install infront of it and it will install it.
Once installed please open it and use it.

Ipad2 will not connect to internet with wifi

Can anybody help me please. I bought a beautiful 32gb WiFi only ipad yesterday and cannot get it to connect to my home WiFi. It shows a full strength signal but I cannot open email or Safari etc.
I see that there are a lot of people with this problem - what I would like is to hear from someone who HAS fixed it - and how. My problem is that I do not have the knowledge to understand what people mean when they are talking about reconfiguring their routers etc -- can someone lead me through a solution in "Computers for Dummies" fashion?? My router is a Speedtouch and my broadband provider AOL. Would be most grateful to hear from you.
Lisa

hi! i have the same issue with my ipad 2 16gb which i bought about 3months ago. i've been using this with my laptop's internet sharing wireless connection and it's been working real fine until i updated my device's firmware from 4.3.3 to 4.3.5 iOS. my iTunes stopped working normally altogether and started freezing and it drove me nuts! from then on i cannot access the internet through wi-fi for a week now and all my documents disappeared to because i have to sign in to my accounts (like newzik, file apps, documents) but sorry me, i cannot get connected to the internet. i just hope apple would take action on these issues. i don't think it has something to do with my laptops wireless network device because even i'm outdoors i cannot access even public wi-fi networks. my ipad 2 connects to a wi-fi netowrk but cannot access the internet. i tried resetting and restoring my devicce but nothing worked. i have an MSI A6200 laptop on windows 7 64bit by the way.

How to block an app from using internet both wifi and cellular

Hi,
I want to stop an app from using internet ( neother cellular data nor data from WiFi).
Uninstalling the app is not a solution.
Is there a way to get this done ?
Please help.
Would be much appreciated.
Anc

Sorry if I wasn't clear. I just woke up. Let me start again.
Open iTunes with your phone connected to the computer. Now, click on Apps in the iTunes sidebar. This displays all the apps you currently own. Locate the one you don't want. CTRL- or RIGHT-click on it and select Delete from the context menu. Go down to the Devices section in the iTunes sidebar. Select your phone and sync it. The app should be removed from your phone and the listing of apps under the phones Apps tab in iTunes.

Using Browser with WiFi

Greetings. I just purchased a bb curve 9320 and I'm very happy with it. I bought it unlocked and I'm using it with T-Mobile_text and talk only(no data plan)
I have one concern: I've been reading in some forums people say they have trouble and complain that WiFi options are very limited without a data plan.
I have successfully connected my WiFi and I'm using the native browser to surf the web. Does this mean I might get charged extra at the end of the month? I want to make sure I'm not using any features that are supposed to work only with data and I'm getting charged extra.
Thank you!

Hello as_1000 and welcome to the BlackBerry® Support Community Forums.
Thanks for your question on Wi-Fi® usage.
Any questions related to billing and charges are best addressed by your mobile carrier since they control the billing.
I would suggest you give T-Mobile a call and inquire about billing questions.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Can I use Ipad2 with wifi +3G with an Alltel Motorola MilestoneX 3g hotspot phone?

Alltel is my mobile service provider, and they are now offering the Motorola Milestone X running Android 2.2; this phone can function as a 3G hotspot. If I have an Ipad2 with wifi+3g, and I turn the hotspot functionality of the phone on, can my Ipad then connect to that hotspot signal created by my phone--even though my service is through Alltel and not Verizon or ATT? Alltel charges $20 a month for this functionality on top of my smartphone plan, but it provides unlimited data usage. The fee for 3G Ipad date service for both Verizon and ATT is just a little more, but they have data limits on those plans.
Any assistance/info you can provide will be appreciated!

ok, so the phone creates a wifi signal, not a 3g signal--then the Ipad connects via wifi, not 3G, to the phone-- and then gets data off the 3G network ...that is where I was confused. Data flows from the Alltel 3G signal to the phone, then from the phone's wifi hotspot via a wifi signal to ipad's wifi receiver...
I was not sure if the phone "created" a 3G signal that the Ipad was then supposed to connect to...
Much clearer now...thanks!
So, if this is how I am going to use it, do I even need the Ipad+3G--I really would only need the Ipad2+wifi, correct???

When trying to use internet without Wifi I get a "Could not activate cellular data network - PDP authentication failure". What is the solution?

When trying to use internet, i get a" could not activate cellular data network - PDP authentication failure" Message. how to solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

Can you use facetime with wifi only? No SIM card in iphone4

Party A: No SIM Card, in US, calling using WIFI
Party B: SIM Card, in another country, receiving calls, with WIFI
Can Party A and B connect through Facetime?
Thanks for your time.

sasan007 wrote:
You can make video calls through skype.I think without sim you cannot use facetime because facetime needs your sim number.
Slight correction: FaceTime on the *iPhone* needs your SIM number. FaceTime on the iPod Touch, iPad and MacOS have no such need.
This is one of the things I hate about Apple. Why not just allow everything to behave the same? Why should FaceTime, a non-cellular application, have to behave differently on the iPhone than on all other platforms?
(I also don't like that Videos lives in the iPod app on the iPhone, but has it's own app on the iPod Touch and iPad)

I can't connect to Internet with WIFI

Hi !
First, sorry for my so bad english but I'm French ;-)
I'm so desperate !
I have a Blackberry Curve 8520. I bought it on july. It worked very well, but since 3 months ago, i can't connect the BB to internet (with Wi-Fi or WAP).
I tryed many Wi-Fi, i tryed all the options and now i'm so desperate... Nothing works for me.
Can someone help me please?
Solved!
Go to Solution.

You can try this im also using Curve 9300 3G version 6 o.s
1.Turn Off / Uncheck your Mobile Network
2. Enable Wi-fi if theres a WEP just put in it.
3. Data Service should be ON - can be found on Mobile Network Options
4. Browse - Browser, Social apps etc
Hope helps
I guess if it is in WI-FI mode we can't call / receive Calls or Text on your network, seems strange in BB.

How to use internet through wifi without deducting my credit

when i use internet using wifi my sim credits gets deducted.
please suggest me the right settings.
thank you.

1. I get that you are trying to connect to your brother's wifi. But what are you trying to connect to his wifi? A computer? An iPhone? An iPad? Something else?

Using internet with wifi

Similar Messages

Maybe you are looking for