Using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

Uh .... Yes you can. You just have to understand how the whole thing works.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Similar Messages

  • Digital I/O why can't I have line outs and line ins in the same application?

    I have a problem with my digital lines. I have several "write to digital line" VIs, and I also need some "read from digital line" VIs. My problem is that when I supply 5V to the line in, it doesn't register high. I checked this on a separate program, and when I did not have a "write to digital line" , the "read from digital line" was at 5V (I checked it with a multimeter). As soon as I included a "write to digital line" in the program, the input was jumping around 1.3V. What is the problem here?

    Hello,
    I apologize for the delay in responding to your question. You are writing to digital channel 0. This is the same thing as digital port 0. A port is simply a collection of digital lines. Since you are reading and writing to lines 0-7 on channel 0, the Write to Digital Line and Read from Digital Line VIs are resetting the state of the port every time they are called. I notice you have wired a 0 to the iteration count of all the write VIs, but nothing to the read VIs. To fix this problem,
    Wire a 1 to the iteration input of all the write VIs except for one. This last VI you can either wire a 0, or leave it unwired as 0 is the default.
    Wire a 1 to the iteration input of all the read VIs.
    I have m
    odified your VI in this way and attached it below. Ideally, you would want to write to a line with 0 for the iteration count only once (outside the loop). The modified VI will do it at the beginning of every loop iteration. I have tested it here and it seems to work without problems. The reason for the modification is that both the high level read and write VIs reset the port when they are called unless you wire a nonzero number to the iteration input. This effectively tells the VI that the port has been initialized and it can skip it.
    Feel free to post again if you have further questions. Happy coding,
    Grant M.
    National Instruments
    Attachments:
    dio_problem.vi ‏75 KB

  • Can't open LR 3.6 and LR 4.1 at same time.  Normal?

    I have 4.1 and 3.6 installled in their default locations, and have a shortcut for each on my desktop.  I'd like to open both and switch between to easily compare features.   But if I open one, minimize it than try to open the other by clicking on its shortcut,  the first one I opened restores, and the second does not open.  
    Works that way in both directions, that is whether I first open 3.6 or first open 4.1, it is not possible to open the other using its shortcut..
    I can see why Adobe may have done this, but want to confirm that I don't have a glitch in my installation.  Is anyone able to have both versions running simultaneously?
    Running win 7.

    No, that's impossible.
    Frans

  • Can't run Firewire 800 Drive and Firewire 400 Camera at same time?

    I just bought a 1TB firewire 800 drive for time machine. Works great. Problem is, when I plug in my Canon DV via firewire at the same time the 800 is connected it doesn't work. I have to unmount the HD, turn it off, and even THEN it wont recognize the DV camera. I have to physically unplug the firewire 800 to get my Canon DV to mount. Amazing. Never had problems with the DV before. Is there some hardware reason why I can't run an 800 and 400 firewire at the same time? Any help would be great. Thanks.

    Some DV cameras won't work with anything else connected to the FireWire bus (the FW400 and FW800 share the same bus)
    ... in particular Canon cameras (Canon firewire implementation) are very sensitive to other firewire devices.
      Alberto

  • I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

    I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
    i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

    Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
    It isn't the retail version, because that's 10.6.3.
    Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
    OK the language page.
    From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
    Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
    When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
    If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

  • I'm changing from powerpoint to Keynote.  In powerpoint you can change slides by typing in the slide number and hitting enter.  I want to do the same in keynote without the slide switcher popping up at the top.  Possible?

    I'm changing from powerpoint to Keynote.  In powerpoint you can change slides by typing in the slide number and hitting enter.  I want to do the same in keynote without the slide switcher popping up at the top.  Possible?

    Wow, I may be losing my mind, you're right.  I guess I was doing what you said out of old habits and not even realizing it.  Much appreciated.

  • If i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

    if i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

    Yes, but if you want these devices to have complete capability of calling each other they each must have their own separate, individual e mail address.  If they don't have individual e mail addresses, the i phones will be able to call each other because you'll be using their  individual phone numbers -- the Mac mini will be able to call the i phones, but, the iphones will not be able to call the Mac mini.  This is because the iphones will be using the mini's e- mail address to make the call, and if they have the same e mail address, they will think they are calling themselves, so the call will not connect.
    So, the way I see it is,  if you keep all of the email addresses the same, the only thing you'll loose is the ability of the iphones to call the mini.
    EDIT:  Thinking about it, my first sentence needs to be modified.  Your iphones can share an email address but it must be different from the Mac mini address.
    This isn't rocket science, but it can make your head spin. LOL

  • TS3304 I have an Ipad1 and an Ipad2. The Ipad1 cannot connect to my wifi and indicates the password is incorrect even though I am using the same password??

    I have an Ipad1 and an Ipad2. The Ipad1 cannot connect to my wifi and indicates the password is incorrect even though I am using the same password for the Ipad2??

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    Hi Goofy Goat,
    Welcome to the Apple Support Communities!
    It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Have a great day,
    Joe

  • Can i run remote memory profiling and remote debugging at the same time .

    can i run remote memory profiling and remote debugging at the same time .
    i am using jdev9.0.5 and oc4j9.0.4 standalone server.
    how to write the batch file to run both at the same time

    Thanks for your help!
    Another question. How do you turn off the ATT wireless transmitter? Also, there are more computers connected to the 2Wire network. I will have to set up a wireless pc to work with the Base Station after disconnecting the ATT transmitter. Easy answers for both, I hope?

  • HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    <http://support.apple.com/kb/HT5891>
    You can use USB for the Apple trackpad.
    <http://www.mobeetechnology.com/the-power-bar.html>

  • HT204365 I would like to use dictionary on PDF like the books? Because it can't be highlited like books and then definition of the words.. Thx

    I would like to use dictionary on PDF like the books? Because it can't be highlited like books and then definition of the words.. Thx

    this is a user helping user forum so we can't really do much about what you would like contact apple here
    http://www.apple.com/feedback/iphone.html

  • HT4061 I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it!  What can I do to save them?

    I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it!  What can I do to save them?

    Swayzeone wrote:
    I just tried updating my iPhone 4GS
    No, sorry... did not happen becasue no such model exists.
    If the device is in recovery mode, any data on it is already lost. 
    The only options are:
    Restore the device to get it functional.
    Enjoy the paper weight.
    For what reason did you attempt to update the device without first ensuring that your data was safe, meaning backing up the device and copying important pictures/videos taken with the device to a computer?

  • How do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

    how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

    If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
    Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond.

    While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond. This has been happening ever since the last update.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Maybe you are looking for