Using ipad2, loaded ios 7.1.1 last night and wifi connection went intermittant to not at all

My Ipad 2 has worked perfectly.  Last night I loaded ios 7.1.1.  The wifi now only briefly connects then is lost to APPs.  Have rebooted all devices and no change.  My Dell PC connects perfectly to the wifi

Updating is an intensive process on an ios device and marginally working components may fail during the process. Test on another wifi network to confirm the issue is not confined to one network and if it has the same issues there you may need to take it in for service.

Similar Messages

  • No sound.  Mute is not checked, volume all the way up on iTunes and on status bar.  What am I doing wrong or missing?  I restarted last night and it worked before that but not since, any one have any ideas?

    No sound.  Mute is not checked, volume all the way up on iTunes and on status bar.  What am I doing wrong or missing?  I restarted last night and it worked before that but not since, any one have any ideas?
    Thanks, Rob

    First off did you go to System Preferences > Sound > Output > And is the correct output selected?
    Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
    Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left.

  • My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont know what to do.  How should I fix this problem because I cant turn it back on?

    My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do.  How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.

    I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do

  • I just upgraded to OS 10.8.4 last night and my Office 2011 programs will not work.

    I just upgraded my MacBook Pro (early 2011) to OS 10.8.4 last night and my Office for Mac 2011 programs will not work. To test in safe mode, I shut down my computer, restarted in safe mode to see if I could open any of my word or excel documents, which I was able to do.  I restarted, and tried opening an office document (word and excel), which did not work.  Does anyone have a solution to this?  I cannot revert back to OS 10.8.3 because I did not use Time Machine.  Any help will be appreciated.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I updated my Ipad 2 last night, and now my Kobo application is not working. Any ideas?

    So, last night, updated my Ipad 2, it took ages, but went smoothly. Two things I noticed right away--my Kobo application is not working (opens, but bookmarked screen is blank), and when I went to the App store to see if I had missed a Kobo update perhaps, the APP update screen was frozen and wouldn't allow me to select ANY updates.  Anyone have some advice?

    Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.

  • I down loaded the new Fire Fox last night and this morning I could not send messages from my mail.

    I am now using explorer.
    When I press compose everything is in place but I can't even put the address in . It's as if it is locked.
    When I try to reply I have the same problem. Also I cannot forward.
    Thanks for any assistance.

    Hi Gorgiana,
    Can you tell me which email you are trying to use? What is the name of it or the website you go to when you send email?
    Thanks,
    Michelle

  • HT4097 my ipad was at first while i was doing stuff it would pause with a blue screen and then id have to reset it ..so i restored it last night and when i went to connect to wifi to set my ipad up it tuned off and went into recovery mode .... help

    my ipad is still not working its come up with the gray background with i pad writte in the background and well it turned back off and wont let me do anything so ive tried again resetting it and now its saying the itunes on my sisters computer needs to updated before i try to fix my ipad !!!! i am not inpressed as i got this ipad from my fiance on christmas and ive hardly used it and now im having problems with it and i dont understand why?

    You can re-download for free (As with the free music the bill just reads .00) .
    Try it with one and see for yourself.
    Oh yes, spare yourself future grief since this doesn't apply to music and video, get an external HD to back up iTunes and use it!

  • HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

    I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Late 09 MB Pro 13" now on Mountain Lion keeps crashing (spinning wheel) and getting VERY hot. Even Safe Mode slow to work. Managed a back up last night and wondering should I put the original ios disc back in to take it back to SL. Advice appreciated!

    Hi
    For past year or so my mac book has been getting gradually worse. Spinning wheel, and overheating, last night I had trouble just getting it to start in Safe Mode (been using the on/off button a lot lately!)
    Problem may be related to media - iMovie followed by iPhoto are the most likely programs to bring everything to a stop but not always.
    I'm not an expert although I did figure out how to re install the operating system from the partition with help from this forum a couple of months ago but it didn't fix the problem.
    The iOS is Mountain Lion (via Lion)
    I managed to do a back- up last night and now wondering if I should re- install Snow Leopard from the original discs that came with the laptop. 
    Got a lot of media on there (replaced the 250gb drive with a  Samsung 1tb a while back which is less than half full.
    Never had to use any of my back-ups before so:
    If I re install the original operating system will I be able to be selective in what I put back on later?
    and -
    Will there be any issues putting a Mountain Lion back-up into a Snow Leopard iOS?
    A lot of whats there isn't needed but don't want to lose it completely.
    Advice appreciated thanks

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU|I/O' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
    kernel[0] <Debug>: disk0s2: I/O error
    the boot drive is failing, or there's some other hardware fault in the storage subsystem.
    If you get output like this:
    kernel[0] <Debug>: ** GPU Debug Info Start **
    kernel[0] <Debug>: ** GPU Debug Info End **
    there's a fault in the graphics processor or logic board. The two kinds of output are not mutually exclusive, but if you get both, a logic-board fault is likely.

  • I have elements 7 loaded on my laptop. I bought a new one and want to load it onto the new one. I talked to someone on adobe site last night and he gave me a link to down load it. it failed so i googled it, and the downloaded it just fine. I went on to th

    i have elements 7 loaded on my laptop. I bought a new one and want to load it onto the new one. I talked to someone on adobe site last night and he gave me a link to down load it. it failed so i googled it, and the downloaded it just fine. I went on to the adobe site signed in and looked at my product history and got the product #, however, when i entered the product # i it didn't likeit. What do i do?

    Is your laptop running Windows XP, windows 7 or Windows 8/8.1?  If so then I suggest download a tool that will retrieve the serial number from the old laptop which you can use it on your new machine.  The tool is called:
    Belarc Advisor
    It can be downloaded from here:
    <http://www.belarc.com/Programs/advisorinstaller.exe>
    Install this and then run it by double clicking on its icon and then wait for about 5 minutes while it generates all the info about your machine and software keys.

  • HT201210 Updated my iPad iOS last night and lost 'street view' on maps.  Is apple ignoring this loss of an existing application on maps?  What good is the update.  How do I get rid do the update and back to what I wanted and had?

    Updated my iPad iOS last night and lost 'street view' on maps.  Is apple ignoring this deletion of streetview on maps and how can I have it restored?

    Streetview is the property of Google. The new application not using Google services anymore (for many reasons you can find around the web), Streetview is gone too. Just download the free streetview app from the appstore

  • HT201210 Can I downgrade my ipad from 6.0.1 to 5.1.1 coz it updated accidentally last night and can get to use anything on my ipad 2

    Can I downgrade my ipad from 6.0.1 to 5.1.1 coz it updated accidentally last night and can get to use anything on my ipad 2. If possible, can I get to downgrade it online if possible please because am stuck now.

    Sorry, no. There is no Apple approved way to downgrade an IOS device.

  • My IPad2 has a black screen and won't turn on. It worked perfectly last night and has no response this morning.

    My IPad2 has a black screen and won't turn on. It worked perfectly last night and it is completely black this morning. It is fully charged.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Downloaded latest update ios 5.1.1.last night - now have problem with my email some being sent others not - any ideas?

    Downloaded latest update for iphone 4 ios 5.1.1. last night - now having problems with my emails - all show being sent - but not being received also no b.c.c. to myself coming up on iphone.  Any ideas?? 

    The passcode settings simply give you the option of having the passcode lock immediately you lock the screen, or after a delay period.  If you set a delay the passcode lock will not activate for the period of the delay.  I have mine set to one minute.  It is a "convenience" measure to save me having to re-enter the passcode if I lock the screen then immediately remember that there was something else I wanted to do.  Obviously this entails a small compromise on security and if you are at all concerned then you should set the passcode to "Immediately".  It really has nothing to do with the camera short-cut (though loads of users seem to have run away with this notion).  It would be the same if you just did "slide to unlock" during the delay period.

  • HT204076 Since I updated my iPhone 4S to iOS 8.1.2 last night, I can no longer connect to my imaps server.

    Since I updated my iPhone 4S to iOS 8.1.2 last night, I can no longer connect to my imaps server. Other clients can connect to the server. Rebooting the device is no help. Before the update (i.e. 8.1.1), it was working fine. Is this a known issue?

    No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.

Maybe you are looking for