Using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper

using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper    installed hp photo app on iphone to utilize printer

Are you using Page Setup within Firefox?
https://support.mozilla.org/en-US/kb/how-print-websites#w_changing-the-page-setup
See - Margins and Header/ Footer

Similar Messages

  • WPS54GU2 printing to parallel printer with Windows 7 64-bit-cannot get it to work for the life of me

    Hello,
    I am having the worst difficulties getting the WPS54GU2 to print to a HP Laserjet 4L printer. I know that the general communication is working as I am able to print a test page from the 
    I have the IP address correct for the print server (in my case it is 192.168.1.103) and is set statically in the print server setup.
    I have it working fine on an XP box The port name configured on the XP machine is LK89A0B5_P1.
    The software that comes with the WPS print server will not install on Windows 7 so the address/port/queue must
    be set up manually.
    I have tried the link from Cisco's KB that shows how to configure the print sever:
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=69efd80e2ea44d948fea2365d3e0c9eb_Configuring_TCP_I...
    however this does not work and the print job either gets stuck in the print queue, or it shows busy/error in the print queue.
    I have also tried suggestions on this forum that say not to create a TCP/IP port but instead use LPR port.
    Can someone please give me the solution that will work. I have heard people say to use L1 for the queue name, or P1, or LP1
    or lp1. I cannot spend much more time on this before I give up and look for a different print server that will work with both parallel and USB printers.
    Thanks for help/suggestions on this.
    Mike

    sometimes it needs the device- specific drivers to get it to work; especially that you have a 64- bit OS.
    the print server is already connected to the network, right? what is its IP address? check if the computer can ping that IP by going to start> search> cmd> ping 192.168.1.78 (change this to the correct IP address). if your computer can ping the print server then you can setup LPR printing to get your printing jobs done. click on the link below for more info.
    Setting up LPR Printing on Windows 7

  • I just purchased a JBL charge wireless speaker that is supposed to be compatible with ipad using Bluetooth , but cannot get my ipad to find the device. Please help

    How do I connect ipad  to jbl charge wireless speaker using Bluetooth. My ipad and ipad mini do not find device

    I am having the same issue as YCandy.  My iPhone 5 paired immediately - then I had bluetooth on my iPhone "forget the device" - but when I try to pair with my iPad it doesn't find the speaker.  I just purchased the JBL Charge wireless.       
    The directions that come with the speaker are just pictures - shows me how to connect everything and what each light and button means.  But it doesn't explain how to make sure the device is in "pairing mode."   What does that mean exactly?   The power button is blinking Blue - and never pairs with my iPad.  
    Any suggestions?

  • Use ipad2 to play video on Apple TV but cannot get the video to play on the iPad even though I change setting without shutting down and restarting the ipad.

    I have been using my ipad2 to show video on my flatscreen using the Apple TV.  Recently I find that once I use Apple TV I cannot switch back to the ipad for viewing even if I go back to the little rectangular screen and change the checkmark to ipad.  Once this happens all my videos will only play through apple tv.   If I shut down the ipad and restart it I come up in the ipad mode and can view it on the pad. 

    Welcome to the Apple Community.
    Not really sure on this one, but one thought I have is how full is your iPad. Have you connected your iPad to iTunes recently.

  • Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud.  The to do bar just shows no upcoming appointments when my calendar is filled with them.  How do I fix this

    Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments.  If has the notation that no appointments are available?  My calendar is full of appointments.  How do I correct this?

    I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution:  While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

  • My printer officejet pro 8500A plus won't go into power or screen saver mode with XP Prof/

    why doesn't my printer officejet pro 8500A plus go into power save or screen saver mode with windows XP Professional?
    I have updated the firmware, i've put the printer through a power cycle, I did a semifull reset. I checked the boxes to on for power save and screensaver. Yet my printer runs through the product tour all day long

    the only place I can find to enable power and screen savings is on the printer LCD itself. Is there somewhere else to look for this option? I look at printer HP on windows go to properties and there is no way to enable power saver mode.

  • I use iphone 4s on ios 7.0.4 but it dosent sync music with itunes 11.1.5.5 i tried everything but dosent work !!!

    i use iphone 4s on ios 7.0.4 but it dosent sync music with itunes 11.1.5.5 i tried everything but dosent work !!!
    any one can help ?
    now i phone is just 4 nothing

    Visit the local Apple store in the mall and they ran diagnostics on it. They told me the phone has no hardware problems.
    Still the issue is not resolved.
    Please help it has been more than 2 weeks that I have this problem and it seems no one is helping.

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I am using iphone 5 with vodafone network in NOIDA , but alwaz my phone is not rechable,

    i am using iphone 5 with vodafone network in NOIDA , but alwaz my phone is not rechable,

    Then as you've tried resetting the phone, the next step is to restore it from the latest backup. If that doesn't work, restore it as new, and if that doesn't work take it to Apple.

  • Im Using iPhone 4 factory Unlocked device iOS 7, but device was feels slow, so i want to restore to iOS 6.1.3. how can i do this? please help me anyone itz urgent.

    Im Using iPhone 4 factory Unlocked device iOS 7, but device was feels slow, so i want to restore to iOS 6.1.3. how can i do this? please help me anyone itz urgent.

    As has always been the case, you cannot go back.
    Sorry

  • I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

    I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

    Go to Mail Preferences
    Click on the General tab
    Set  "Check for New Messages:"  to  "Every Minute"
    Hope this helps

  • Yesterday i bougt a used iphone 4....when i tried to reset it it asked for the apple ID which of the person from whom i bought the cell...so is there any way of formating the iphone

    yesterday i bougt a used iphone 4....when i tried to reset it it asked for the apple ID which is of the person from whom i bought the cell...so is there any way of formating the iphone.............plzz help me 

    i have the phone unlockd but need to restore it to factory settings nd when i do it ...it asks for the apple id and passord of the guy from whom i bought it.......is there no way to restore it to factory setting

  • IPhone 3 I cannot get my pictures to download from iPhoto.  I keep getting the error message required file cannot be found.

    I cannot get my pictures to download from my iPhoto from an albumto the iPhone 3 (one of the kids phones). I was able to download an Event.  I have changed the name.  I have used my iPhone 4 and the pictures from the album downloaded just fine. I have looked at the message board and I have deleted the cache and done all the things that were suggested.  WHAT IS THE DEAL!! I have been working on my phone and the kids phones for about five hours now and super frustrated!!! 

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. H

    Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. Help?

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • Just bought the new i phone 4s, set up my apple id, verified with email. I can sign into it on the computer no problem but cannot get to it through iphone. Unable to download apps or music. let me know if anybody has any solutions, thanks

    Just bought the new i phone 4s, set up my apple id, verified with email. I can sign into it on the computer no problem but cannot get to it through iphone. Unable to download apps or music. let me know if anybody has any solutions, thanks

    If you have an old ID in Settings>iCloud as a result of updating to iOS 7, to change it you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change (you should need to verify the old account).  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Maybe you are looking for

  • Urgent Need Help Nokia C3 Hanging Lots !!!

    Hi friends I have just buy new nokia c3 one month ago i like it service but it gone hanged many of time a day i am in a big problem please help me!!!! looking for answer and thanks in advance 

  • Complicated Excel form needs to be converted to PDF Fillable form

    I have an Excel file have has hidden cheater fields (M&N) and a hidden lookup table (O:P). The form fields that are used follow (using row 10 as an example, rows 10-25 are involved) E10 = Lengthft (entry field) F10 = Widthft (entry field) G10 = Patch

  • Debugging in JDev 10.1.2

    I've created an application workspace with a single project, and the project has a single java class that contains a main method. I've put a stop point on the first line of the main method, and another in another method that main calls. When I try to

  • Transport of requests stms

    A consultant asked us to transport a customizing request to our quality sap environment. After transporting it, he saw that he's made a mistake, and he's asking me if it's possible to cancel this transport. If it was a program, it's very easy. I woul

  • WDS and DHCP issues

    Hi I have a series of 1200 series access points, set-up for WDS infrastructure mode to ACS and client authentication to Microsoft IAS. When set up in WDS mode, clients authenticate to the IAS server (and event viewer confirms this), but clients do no