Using iPhoto Slideshow for Work Presentation
Hello.
I have created a slideshow I'd like to use for presentations for our non-profit organization. Can I save the slideshow (AND the accompanying music) to a CD/DVD and then play it on any TV? Will it have the same look (fades, etc) and the music playing in the background?
THANKS!!
~linda
Linda:
Yes you can but you'll have to share it into iDVD and then burn a DVD capable of playing on any DVD player to a TV.
I suggest you create an iDVD project first, select the theme, etc. Then in iPhoto use the Share->Send to iDVD menu option. Once the movie is in iDVD you can finish off the details of the project and do a Save As Disk Image. This will create a disk image of the project that you can open and play with DVD Player to check on the quality before you commit to disk. Once you're satisfied with it you can burn that disk image to disk with Disk Utility.
Note: As a movie it will be difficult to move backward to view a previous slide. It's like running the movie backward to get where you want. If you're not using the Ken Burns effect you can create the same slideshow directly in iDVD, complete with transitions, titles and subtitles if desired and music. With this system you can move forward and backward slide by slide if needed just by using the forward and backward arrow buttons of the DVD player remote. IMO this type of slideshow gives sharper image quality than a movie type. But that's just a personal opinion.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Similar Messages
-
Can't access itunes library when using iphoto slideshow
When using iphoto slideshow and click on music, iphoto shows my itunes library but not the list of songs. When I click on library it only plays the first song on my list. I can't change to other songs.
I have the latest software for itunes, iphoto and quick time. Can anyone help me.
Thanks, KathySandy
Doesn't play songs purchased on iTunes either,
probably because of the copyright infringement
issues.
It does. You'll need the latest version of iTunes
and the latest version of Quicktime for this
to work.
Regards
TD
Gotcha! It's the QT holding me up them. I have QT Pro and I don't want to update because then I have to PAY again for the Pro part. I learned that the hard way. What a rip off on their part for the users of their Pro version.
Sandy
iMac G5 20, iBook Mac OS X (10.4.8) Linksys WRT54G Firmware v2.04.4, Comcast Cable -
I am considering using I PAD for a presentation using a projector. How can this be done. will Apple TV connect to a projector and if so does the projector have to have an HDMI slot or is there some sort of adapter to convert VGA slot so it connects with Apple TV. I also want to do it wirelessly so does the Apple wireless device work for this purpose, is so what do I need to connect that to the Apple TV and to projector. So, ideally I want to be able to operate the IPAD without it being connected to cables and have the image procted on screen using a projector which only has the VGA slot not an HDMI slot. any suggestions will be appreciated.
Kenabsalom wrote:
I am considering using I PAD for a presentation using a projector. How can this be done. will Apple TV connect to a projector and if so does the projector have to have an HDMI slot or is there some sort of adapter to convert VGA slot so it connects with Apple TV. I also want to do it wirelessly so does the Apple wireless device work for this purpose, is so what do I need to connect that to the Apple TV and to projector. So, ideally I want to be able to operate the IPAD without it being connected to cables and have the image procted on screen using a projector which only has the VGA slot not an HDMI slot. any suggestions will be appreciated.
It can use Apple Tv, but will require a wireless network as well. The Apple TV has an HDMI output, and depending on the projector it may connect directly to it through HDMI.
There are adpaters out there that will convert from HDMI to several other types such as VGA or Composite oir RGB. It would not be directly an Apple product as it would work with the HDMI cable rather than the apple TV or iPad directly.
Basically your setup should be:
iPad -> Wifi Network -> Apple TV-- HDMI Cable-->Adapter---->Projector
If the iPad is iPad 2 or above you can mirror the entire display to the projector through the apple Tv.
The Adapter would be something like this for instance:
http://www.amazon.com/Sanoxy-HDMI-Composite-S-Video-Converter/dp/B0047PDBP0
Or this:
http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC
With that said there are projectors that can be used wirelessly from the ipad without the need for Apple Tv or any adapter.
Epson makes one and a proprietary App to use it.
https://itunes.apple.com/us/app/epson-iprojection/id488048021?mt=8 -
Just purchased a new iMac and after transferring all info from my old iMac. Now when using iPhoto slideshow it displays the pictures in reverse order.
There's a bug in iPhoto 9.5.1 and Mavericks that affects slideshows played directly from an album. The slideshow will not play correctly if the photos have been sorted manually. Any other type of sort, date, rating, keyword or title, will play correctly.
If you need that manual sort of pictures for your slideshow create the slideshow in iPhoto's slideshow mode.
OT -
Use custom field for work phone number in CUCiLync
Hi,
I have searched and tried out all sorts of different settings for enabling/changing the way CUCiLync searches the Active Directory (AD) for contact phone numbers.
But no matter what setting I use in the HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\AdminData and/or HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\Active Directory hive, CUCiLync still uses the default for Work phone number. The default for this is to use telephoneNumber, the value that I wish to use is the ipPhone field.
The registry values that I have tested so far are these.
HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\AdminData
LDAP_AttributeName_businessPhone
LDAP_AttributeName_primaryPhoneNumberForSearches
LDAP_AttributeName_otherPhone
All set to ipPhone, and I have also tested to set it to another field in AD that contains the same value as the ipPhone, that is in my case extensionAttribute5.
HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\Active Directory
BusinessPhone
PreferredNumber
DisableSecondaryNumberLookups
First two set to ipPhone and the third set to 0, and I have also tested to set it to another field in AD that contains the same value as the ipPhone, that is in my case extensionAttribute5.
The above values comes from these two urls,
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/installguide/config_active_directory.html#wp1141403
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/installguide/config_active_directory.html#wp1137551
The later url have this
Table 3-9 LDAP Registry Subkeys
Subkey Names
Description
LDAP_AttributeName_primaryPhoneNumberForSearches
Specify the phone number that you use to resolve most LDAP queries. This value must match one of the values specified for the following LDAP keys:
•LDAP_AttributeName_businessPhone
•LDAP_AttributeName_homePhone
•LDAP_AttributeName_mobilePhone
•LDAP_AttributeName_otherPhone
The values that are valid for the LDAP attribute keys listed above are:
•telephoneNumber
•homePhone
•mobilePhone
•otherTelephone
•a custom LDAP attribute value, for example, myCustomPhoneNumber
The value of the LDAP_AttributeName_primaryPhoneNumberForSearches key must match one of the values in the list above, for example, telephoneNumber. Otherwise, the value of the LDAP_AttributeName_businessPhone key is used.
The version of CUCiLync is 8.5(3)-4.5.9, that is the latest I can find on the support download page, have also tried with earlier version 8.5.(1).
Does anyone have any suggestions for how to achieve this, if at all possible?
Roger KallbergThis is the reply we got from TAC.
Regarding to your query, Can you please go through the attached flow diagram (also you can see it in the link given below). I hope it will clarify more on the telephone number display behavior in office communicator.
As per this flow chart presently your setup is working as designed. As per the design, the number should be in E.164 format in order to be available in MOC.
You have AD in your network as a source, so OCS pulls this information from LDAP it is integrated with. As per Microsoft, here you need to add Normalization rules to OCS to normalize the number into the E164 format.
http://technet.microsoft.com/en-us/library/bb964002%28office.12%29.aspx
Phone number display for MOC contact:
•- OCS will not provide a contacts number unless it is correctly formatted to the E.164 standard.
•- The Address Book Service on OCS processes the contacts phone number and attempts to normalize it.
•- If correctly normalized then the number is inserted into the OCS address book.
•- Communicator will only display this normalized number if it is properly formatted in E.164 (+13125551234).
•- The E.164 standard defines an international numbering plan for public phone systems.
•- In the E.164 standard, each number contains a country code, an area code, and a subscriber number.
•- Each phone user has a globally unique number.
•- In Cisco UC Integration for Microsoft Office Communicator, phone numbers in E.164 format must begin with a plus character ("+").
I have done some research to your first question. Can you please just go through the blog given below from the Microsoft.
http://blogs.pointbridge.com/Blogs/schertz_jeff/Pages/Post.aspx?_ID=26.
It tells that If the numbers not in E.164 format then the number will not appear in office communicator if LDAP integrated. Can you please check with Microsoft to see their inputs on this. -
I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?
Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone. -
I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.
Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English. -
I really need help, my ipod shows to connect to the WiFi but then it will not let me use the interent it says no connection but according to my screen i have WiFi connection, i am very confused an i would really appriciate it if someone could help me sort out this problem so i can start using my iPod for work again.
Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
How do I convert iphoto slideshow for playback on dvd player
how do I convert iphoto slideshow for playback on dvd player
Roxio's Toast is one such.
http://www.roxio.com/enu/products/toast/titanium/overview.html
regards
TD -
i'm forced to use a xoom for work. Is there any way of installing android ICS via virtual machine or any other mechanism?
On the iPad? No.
-
I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)
Goto > Settings > Safari... Enable Cookies > Always
Good luck! -
How does an user take an iTunes home movie and convert it back to iPhoto(slideshow) for editing and emailing?
iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera -
I would like to use my iPad for wireless presentations, how is this done.
I am interested in using my iPad for public presentations. I am sure that the bluetooth has this ability. how does one go about it?
Bluetooth does not have that capability, WiFi does.
Maybe you are looking for
-
I can't seem to get my iCloud working between my iPhone and iPad
My wife and I recently purchased (in This order) an iPad, then 2 iPhones, then a second iPad. My iCloud on my devices is working fine. We are having trouble getting my wife's to work. I checked again, and was sure I had done what I was supposed to do
-
How to extract data from a remote system
Hi, I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that? I tried to create another module specifying location of that remote system I could extract the table but when I am ma
-
Declare procedure to use in process flow
Hi I am using a function which return ture or false, i have written a while loop condition if ture then execute else exit. the while loop condition is calling that function but when ruung owb throws error that function is not declared ORA-06550: line
-
Making Relicated objects appear more random
Here's what I've got: A circle shape, fill turned off and outline turned on and thickened, brush type changed to airbrush, opacity of brush altered to have a light middle surrounded by dark front and trailing off to a dark back, and Rate behavior use
-
Hi experts, I am sending a smartform as a mail and have encountered two problems: 1. if I define a background graphic it is not displayed in the mail, and if I use a graphic in foreground it is not positioned where I defined it, it comes first before