Using iPod as a field recorder (and no its not in the wrong forum)

How about this as a field recorder... http://www.bluemic.com/mikey/
Make sure you watch the video
Anybody use one of these yet?

Not sure how good it works but if you get one could you post back with a review. I wouldn't mind having one myself.

Similar Messages

  • I bought a used iPod touch for my daughter and I do not have reset code to reset the device. What can I do?

    I bought a used iPod touch for my daughter and I do not have a code to reset it....neither does the seller.  What can I do?

    that would sound all my alarm bells if this device is stolen.

  • I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

    i have not used ipad from last 1 year and now its not starting any suggestion how to start,

    Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
    Then try to turn it on.

  • My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

    my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

    At the very least, I recommend you restart your router, (your internet box).
    More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
    You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it?  Did you do anything to change your setup, and if you did, what?

  • Used macbook air running OS 10 and I do not know the admin password so I can't get "in"

    Anyone know how to retrieve or work aorund not knowing a admin password?  I just bought a used macbook air running Mavricks and I don't know the **** password.  The company I bought the compuer from is only open from 5am till 5pm Mon-Fri and of course it is after that on a Friday night!
    Any help would be appreciated.

    Reboot holding down cmd-R. It will reboot to the recovery partition. Click the Utilitites menu, then Terminal.
    In Terminal, type
    resetpassword
    and follow the prompts.
    Matt

  • I used my ipod as a hard drive and now its not opening?

    i had synced some 15 gb music onto my 120 GB ipod for a holiday .
    In my holiday i took some 5 gb of photos which i decided to backup on my ipod. So i put the Ipod to USB into the computer, the ipod device opened from my computer icon, and i copied and pasted the photos
    Now, when i try to open my ipod from my computer, and i click on the photo folder, i get a message, please insert disk into drive E. I get the same message if i try to open any folder. All the folders in the ipod show 0 KB. The ipod playlists of music have dissapeared.
    But they ARE there, because the pie chart on my computers, ipod icon shows 20 gb used in 120 gb. So how do i access this photo data.

    Not sure why it's happened, but you could try resetting the password. These instructions work for Lion & Mountain Lion. If you're on Snow Leopard you'll need to use the install disk that came with the Mac.
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • Fields recorded at formscentral does not match the field order in form

    Is it possible to change this? I know I can re-order them from within formscentral but is it possible to adjust form to send them in the right order in the first place?
    Thanks,
    D

    Not that I know of. You might have more luck asking the Acrobat Form forum
    http://forums.adobe.com/community/acrobat/forms
    Gen

  • Deleted app and now its not on the store

    how do i get it back say madden 11

    Developers can pull apps out of the store, or Apple can remove it, and if so there's no way to get around that. In this case, my guess is that since Madden 12 is available, EA has pulled Madden 11 from circulation and there's no way to get it back.

  • HT201303 i put my security code of my card and say its not valid

    i put my security code of my card in app store and says its not valid

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/

  • Hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?

    hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?
    Thanks for answer

    If you go to Apple, they will not replace your battery, but exchange your iPod for a refurbished iPod of the same model with a new battery.  Therefore you will lose everything that is not backed up.  If you change it yourself or have a third party change it, you will most likely not lose anything (but still best to make a backup as lllaass suggested).

  • TS1930 Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

    Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

    There is no enable disk use option for iOS Devices.  See this article for instructions on copying videos and photos from your iOS device to your PC.
    iOS: Importing personal photos and videos from iOS devices to your computer
    B-rock

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Help with used iPod I just got - syncing and uploading a LOT of CD's

    Hello All:
    So I just brought a used iPOD on Ebay, and i'm totally new to using them. I believe it's the 6th generation classic, 80GB, black. I have two questions.
    1) I get the message in itunes that only one library can be synced, do I want to erase the ipod and upload the library thats on my laptop. I assume this is some kind of copyright thing, and that theres no way to save the songs that are on the iPod to the laptop, since they were loaded onto the iPod by the previous owner?
    2) I have about fifty CD's here I want to load onto the iPod. In my mind, i'm thinking I want to backup the iPod with all 50 CD's onto an external USB hard drive. I don't really want 80GB of data on the laptop internal hard drive that I use all the time. I poked around with iTunes for about a half-hour, and I can't see how to load CD's onto the iPod without loading the CD's onto the laptop internal hard drive and then syncing the iPod to load the CD's onto it. Forgive my ignorance, but is it possible to load CD's directly from the laptop CD-ROM drive to the iPod without going onto the laptop internal har drive first, and/or can I use iTunes on the laptop with an external USB hard drive and/or then go from the external hard drive to the iPod or from the iPod first to the external hard drive to backup the iPod?
    THANK YOU,
    Lee Bernhang

    I FIGURED IT OUT!!!!
    what i did was plugged my iPod back up, then when iTunes pops up, drag your 'music' section to your iPod. (you have to be in your library, not in the iTunes store)
    mine synched automatically, and i had no problem ejecting it or anything.
    no error messages either. and all my music is now on my iPod!
    thanks to my dad. (: lol. hope this helps someone!

  • I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    QuickTime version 10 can only record the entire screen.
    10.1, 10.2 and 10.3 offer part of the screen recording.

  • HT4009 I let a child use my iPod and she purchased a lot of doeses for idoser and I did not have the money on my card. Now I can't download anything at all without using a new credit card or paying for it. How do I cancel it

    I let a child use my iPod and she purchased a lot of doeses for idoser and I did not have the money on my card. Now I can't download anything at all without using a new credit card or paying for it. How do I cancel it

    First, to prevent this from happening again, turn off "In App purchases" in the Restrictions settings on your iPod. You may also want to turn off the ability to install apps, to prevent purchases in case the child gets hold of your iTunes Store account information, and set the password to be required immediately. For more information, see:
    http://support.apple.com/kb/HT4213
    As to a refund, that's not automatic since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
    http://www.apple.com/support/itunes/contact.html
    They're usually pretty lenient in the case of inadvertent purchases by children. No guarantees, though, just as if your child was in a store and ate a bunch of food (in other words, something that can't just be returned).
    Good luck.

Maybe you are looking for

  • Can't find files when building EXE unless the WHOLE codebase is in an auto-populating folder

    I have a project with FPGA (specifically a couple cRIO targets). I have a build spec for a PC target, then a target that's set up for Scan Mode, then a couple targets set up for FPGA mode. When I try and build the FPGA or Scan Mode targets, I NEED to

  • Installed Snow Leopard, and Movie Media Player Won't Work.

    My problem is literally as stated. I recently installed the new OS update, Snow Leopard for those few cave dwellers who don't know about it, and the Move Media Plugin doesn't work in Safari. If you go to FOX Network's website, you can watch full epis

  • 2.02 Bug ?? Deleted vlans showing up on vNICs

    Since 2.0.2 has come out I have experianced an issue at each install in which deleted vlans (from global database) are still showing up in the vNIC templates and therefore the vNICs of all hosts.   When vlan is deleted, it is removed from vnic templa

  • I am getting an error"Deletion not possible, original "

    Hi.. When i am deleting the file from one of the document number i am getting below error "Deletion not possible, original is being used in other documents" But for the same document with another version i can delete the file. Please help ASAP..

  • Convert "non-measure" to measure?

    I've got a sheet that has a few hundred measures and a dozen or so dimensions.  Some of the measures have blanks.  PowerView seems to treat these as text fields instead of as measures.  That means I can only do "count" types and not sums or avgs.  Is