Using iPod as a GPS

Does anyone know if it is possible to use an iPod as a GPS? Some sort of device/accessory would need to be attched to the iPod to get it to "talk" to the satellites. I am thinking along the lines of accessories that can be connected to PDAs to turn them into a GPS.

Considering the fact the iPod is not a PDA, I don't think you will find any such device. Why not just buy a portable GPS?

Similar Messages

  • Does my iPod have a GPS?

    Does my iPod have a GPS?

    Fiona Felicity wrote:
    There is an app for it actually if you go to app store and search : Gps there is some different apps that can be used some free and some with money.
    This does not change the fact that there is no GPS receiver on the ipod.
    The apps will not do you any good unless you are in range of a wi-fi router ( as wi-fi is how ipd determines it's location) and will not be nearly as accurate as a unit wth a GPS receiver.

  • Using iPad air as GPS

    If I buy an iPad Air with wi-fi and Sprint, but do not get a service plan, how can I use it as a GPS in the car?
    Do  I have to download a map app and what would be the best way to achieve ths?
    Thanks, all you smart, helpful people!

    Michael is, of course, correct.  Here is more detail.
    GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network.  GPS signals come directly from the GPS satellites.  They provide signals that allow GPS receivers to calculate latitude and longitude information.  Map software then takes that latitude/longitude info and converts it to land mass, roads, bridges, highways, buildings, etc.  Navigation software is "map software on steroids."  It goes one step further in that it provides real-time directions to enable you to reach a desired destination.
    Most navigation software stores the maps right in the iPad/iPod/iPhone but a disadvantage is that the maps must be periodically updated (perhaps once/year).  The Internet is not required to use the system but it is required to update the maps.
    Some navigation software gets the maps from the Internet and requires an Internet connection to function but an advantage is that the maps are always up-to-date.
    The WiFi+3G/4G iPad and the iPhone both have a GPS receiver.  The WiFi-only iPad and the iPod do not and these devices require an accessory.

  • I lost my ipod. Bought a used one to replace it. When I plug it into the computer, the computer doesn't even seem to realize it's plugged in. How do I put my existing itunes library onto the new (used) ipod?

    How do I clear out a used ipod classic and put my existing itunes library on it? I lost my previous ipod and bought a used one to replace it.

    Do one or more of the following
    > Restart your computer
    > Uninstall & Reinstall iTunes
    > Reset iDevice (won't erase everything)
    > Go to My Computer (windows xp) or Computer (windows vista & 7) and see if iDevice shows
    > Restore the iDevice completely (will erase everything)
    > Make sure the iTunes and/or iOS firmware is up-to-date.
    The ones I cross over is the ones you don't have to do. This should help

  • Is there a way to use ipod with new computer without erasing entire library

    I'm not really tech-savvy, but I'm tossing my old computer and getting a new one - is there a way to use my ipod on my new computer without erasing my existing library? It won't let me make changes to my ipod and wants me to erase everything that is on there right now - HELP!

    Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • I bought a used ipod touch 4th gen. how do I add it to my account?

    Hi I bought a used Ipod Touch (4th). It was wiped clean when I got it except it had the prev. owners apple Id still on it when we went to download an app.so I went in sign it out. then created a new acct with it under my apple Id. I have an Iphone 4 (the ipod is for my Daughter).I can download apps, Music etc. But when I do, I get an email from apple saying a device has downloaded a song etc. that is not recognized with my acct.I also when I plug it in to my laptop it does nothing, does not show up on my device list, no pop up to add it,no DING nothing.I take and plug in my Iphone(using the same cord) and Ding there it is..Anyone know how to add this new one to my act so I can use itunes on my pc. and not get the emails?  Also it has been updated to the IOS 4.3.4..Thnxs

    take it to apple store and schedule genius bar appointment.  your iPod is still under warrenty because that version is not even a year old.  They should replace it.  Good Luck!

  • How do I add a used ipod to my itunes, i already have an itunes account for my ipad?

    how do I add a used ipod to my itunes, i already have an itunes account for my ipad?

    Just set it up using the same Apple ID/iTunes account.

  • How do I transfer my current iTunes Library for a 5th gen. Nano to a used iPod touch 2nd gen.?

    I was given a used iPod touch 2nd. gen because my old faithful 5th generation nano was tragically washed. But I'm scared to just plug the new one into my computer to see what happens. I want to make sure I don't lose all of the music I have on my nano. Anyone know how to do this?

    Not sure what you are atlaking about.
    Lose what mui from what ipod.
    Your music should be on your computer.  Sync it to your ipod.

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • I bought a used ipod touch. The music on it was not my taste.  I found a delete feature and now EVERYTHING is gone. No icons. Nothing.  How do I get it back?

    I bought a used ipod touch.  The music on it was not my taste.  I found a delete feature and EVERYTHING is gone.  How do I get the icons back and start over?

    If you did not yet connect with iTunes, you can place any music from your library back into your iPod from the computer. When set to automatically manage usic and videos, whatever iTunes finds changed in your music app will be reset to what is on your computer iTunes library.

  • I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this?

    I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this? I thought I could maybe set up the account on my PC and go from there, but it won't let me do that. It is forcing me to set up on the iPod. Am I doomed to have no iCloud account because I opted for a used device?

    See this previous discussion.
    icloud: The maximum number of free...: Apple Support Communities

  • Resetting a used ipod 4th generation

    I bought a used ipod 4th generation and want to reset it to original factory settings.  I do not have the previous owners info and no way to contact them. How can I reset it.???

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • IPod shuffle 2nd gen not recognized in Mac either Finder or iTunes (but is detected and works perfectly fine on Windows)... i tried using iPod Reset Utility, but no luck...

    i've been working on this for the past few days, and still no luck... iPod Shuffle 2nd generation (i know it's old).... not detected in my home MacBook... but works perfectly fine on Windows....
    i tried using iPod Reset Utility, soooo many times... and i only had twice the luck of having it formatted... but even though it is formatted, it still isn't recognized in iTunes or even in Finder.... other than the 2 times of having it formatted using iPod Reset Utility, i had seen all the reuslts, like: Error ressetting the ipod blah blah: iPod has been reset, keep plugged in, until reset is completed blah blah: iPod has been reset, unplug and replug your iPod blah blah... etc, i have seen all the possible effects of iPod Reset Utility, but still no luck getting it recognized in iTunes or Finder....
    and then , i tried connecting it to a windows computer (but i didn't restore it from there, and just ejected it from windows iTunes), after ejecting it from windows, and then connecting it to Mac, it worked miraculuosly.... perfectly synced and able to put music and listen to them... ejected iPod... after a few minutes, i wanted to add some other music, but when i connected it again, Bam!!!! not working again... even after connecting to windows, it didn't work anymore... guess the magic trick has been doomed...
    i badly need help... puhlease...  (^_^)

    Hey, I hear ya and can sympathize. I have the same
    issue. The difference is that my computer can "see"
    my ipod but it refuses to show up in itunes itself;
    therefore, I can't put anything on the ipod (from the
    computer) and vice-versa. Apple support is clueless.
    This is very frustrating to say the least. Itunes
    keeps telling me that my ipod is synced to a
    "different" computer, which isn't true. It's the
    same computer. The difference is that when I first
    got the 'pod and used it with this computer (and
    everything worked fine), I was running XP. I
    installed Vista and after that, all the problems
    started. If I ever get this resolved, believe me,
    I'll post something here.
    I'm guessing that somehow, itunes "sees" what
    computer it's hooked to by "looking" at something in
    the OS. Change the OS and it "thinks" it's seeing a
    "different" computer.
    Try reformatting it.

  • Syncing/Using iPod on both Mac Leopard and Windows Vista.

    I can't use my iPod on Vista without restoring the firmware to work with windows, and subsequently losing all the songs on it! Is there anyway round this? Basically this means that I cannot transfer my purchases onto a second computer.
    Not good.

    If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Mac formatted iPods can only be used on a PC that has a third party helper program such as XPlay or MacDrive installed: How to determine your iPod's disk format
    XPlay has the added functionality to let you copy your songs back to iTunes. So you could copy all of your songs to your PC and then restore the iPod to format it for Windows and add the songs back again. A Windows formatted iPod can be used on both platforms though you would have to carry out any firmware updates on a PC to maintain the formatting. If you are interested you can purchase XPlay at this link: XPlay
    One last thing, If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
    Using iPod with Multiple computers
    Managing content manually on iPod and iPhone
    Syncing Music to iPod
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

  • Macintosh HD icon showing as "in-use" ipod

    My Macinotsh HD icon is showing as an "in-use" ipod on the desktop as well as in the finder.
    These problems started after my girlfriend tried to download itunes onto this computer (even though itunes was already installed).
    Now, whenever we plug in an ipod and try to update it, itunes pops up a message saying that "the ipod cant update because the playlists no longer exist"
    HELP! Anyone?!
    Powerbook G4   Mac OS X (10.2.x)  

    Ralph,
    Thanks for the response. I did not know it could not be done in Linux. I was just throwing out an option that was available to me if there was just a corrput file that I could download and reinstall on the drive. As far as the getting into recovery, I tried both options and did attempt the erase and reinstall. I am only able to get into the Internet Recovery which when prompted, I can go through the menus, but cannot go any further as the Utility can not "find" the Macintosh HD. It only displays the Mac OS Base System (Disk0) partition. I assume I cannot recover or install since it can not find/mount the Macintosh HD. I just emailed him and mentioned that there had been a small amount of liquid spilled on the keyboard a year ago. This makes me think it may be the logic board failing. I will try to replace the SATA first and then go on with a new board.
    There was not a warranty to speak of that I was told about by him. Before I started I made sure my cousin knew the any warranty would be voided but he wanted to insure his files were safe, and I was the free option compared to the local computer repair shop. 
    Appreciate the help Ralph

Maybe you are looking for

  • WBS assignment in Network

    Hi All, We have developed new report with copy of std report-KALR and the output is coming as excepted in business requirement but the report execution performance is very slow. So i have discussed with technical team about this performance issue and

  • Data source and Transfer  Stracuture Missing..

    Hi,      How to search the Data Source in BI? <Removed by Moderator>

  • 3d-PDF and Word

    Ok, so I finally got a 3D-PDF; Inventor > STP > U3D > 3D-PDF. Now how do I place this nice 3D-PDF inside a Word document? Thanks.

  • WPC Migration to 7.3 - Navigation

    Hi Everyone,      We are in the process of migrating WPC content originally created in version 7.0 to 7.3.      After connecting the Area to the Role I haven't been able to set the top level entry points correctly. I need to define the content below

  • Cisco 3550 Problem

    I have a number of C3550 switches in the field and one of them seems to have a problem showing Interface statistics on some fast Ethernet ports. Most ports are running at 100Meg Full-duplex, but some fail to show any "5 minute rate" stats when I do a