Using ipod nano with car

I just received a new ipod 16gb, which has a new charger.  How can I use this in my car, which has ipod connectivity using the old plug?  How can I use it in my skullcandy speakers, which use the old plug?

As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

Similar Messages

  • Using ipod nano with car stereo?

    sorry if this is a blonde question, but I have just got a new (to me) car which has a sony gtx cd300 stero in with an ipod connection. Ive bought a new ipod nano, plug it in, nano says "OK to disconnect". stereo display does not seem to recognise. Dont suppose anyone can advise me? Nano works fine on its own. stereo works fine as cd and tuner, just cant get it to work with the ipod? arrgh! Very very grateful for any help or advice. Kind regards Lindsay

    As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

  • Using Ipod Nano with Itrip

    I have a question, I recently planned on buying an Ipod mini. I also was getting the Itrip too. So I got most of the money, almost enough for the Ipod so I purchased the Itrip. Now the Ipod Nano has recently replaced the Ipod Mini so im getting it, But..Will the Itrip work with the Ipod Nano? Anyone tried this?
    Thanks so much for your help.

    Unfortunately, this will not work because the iPod nano does not have the necessary accessory port next to the headphone jack. This is really dumb on Apple's part, because now you have to buy a full size iPod to use accessories like that. I still cannot believe they got rid of the iPod mini. It's one of the dumbest moves Apple has every made.

  • Using iPod Nano with 0SX10.1 & USB1

    I want to use my Nano!
    I've a G4 512mb with OSX 10.1 & USB1 with CDRW not DVD.
    I'll need OSX 10.3.9 or later and a USB 2card right? (since it would be sooooo slow otherwise?)
    Will I be able to load this later software with CDRW
    Thanks

    Mac system requirements
    Macintosh computer with USB port (USB 2.0 recommended)
    Mac OS X v10.3.4 or later
    i am not sure if you can load it i dont quite understand your question.
    Black iPod Nano|Black Razr V3|All kinds of cases for nano|Radio/Remote|PSP   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Using iPod Nano with two Nike+ sensors

    Hi,
    I have searched your site but cannot find any information regarding my query. I bought an Nike+ sensor and pick-up unit for our iPod nano 3rdG for my wife to use. We have one iPod, one PC and one iTunes account. This has worked great and now I want to start running. My question is if I buy another sensor and pick-up unit will the iPod store the information separately? Will iTunes be able to upload the date to a different Nike+ account? We would not be able to run together I know that. Whenever I run I'll use my sensor and pick-up unit and whenever my wife runs she will use hers. Will this be possible. Thanks

    I have a ITouch and I run iTunes on a Mac.
    My iTunes keeps track of two different sensors.
    I go to my settings "Nike + iPod" menu and turn on and off, them I press "sensor" and link to whatever sensor I am using.
    Now when I got to iTunes "Nike + iPod" it shows "sensor 1" and "sensor 2" it also allows me to edit the name of the sensors.
    My question is, I want to delete one of the sensors and I don't know how

  • Using IPod Nano With Klipsch Port

    I have played my Ipod Classic on a Klipsch port for years and never had a problem. When I try to play my new IPod Nano on my Klipsch port, I get a strange error message that says something to the effect that "equipment is not compatible to charge Nano." I have no trouble playing my Classic on a port. Can't I play my Nano on a port? Thank you.

    Thanks - that explains it. The exact message I get is "Charging is not supported with this accessory" which makes sense based on your reply. Yes, it does play fine from the Klipsch dock. I'll just charge from my computer.

  • Using IPOD 60 with Car stereo RCA inputs

    I plugged my Ipod into the RCA/AUX jacks of my car stereo. It plays but only through the rear speakers.
    The cord Im using is a phono to rca (used with a portable DVD player).

    Switch the Yellow and Red contacts. Apple does this for some reason...

  • Ipod nano with car kit

    I have just fitted an Alpine car kit to play my nano in the car, but although the track info is coming through on the head set, i get no sound!
    We've tried another nano and it works fine.
    any ideas?

    Try turning the volume up on your iPod.
    You may also want to reset the iPod while it is connected to the system...
    Resetting iPod
    Also, this system connects to your iPod via the dock connector, right?
    btabz

  • Using iPod Nano with new computer

    So I just got a new laptop and want to transfer all of my songs from my old computer to the new one. I hooked my iPod up to the new computer and it says it can only be authorized to one computer and I could sync and erase it. So I hit the button. Now my iPod has 0 songs or playlists on it. I tried following the steps online to transfer the songs from the old computer to the new one, but it didn't really work. Now I am stuck with an iPod with no songs...please help!

    Welcome to Apple Discussions.
    If you want to use your iPod to transfer the songs to the new computer, you can check this: http://docs.info.apple.com/article.html?artnum=300173
    Or if you can connect your computers with a crossover network cable, you can directly transfer files, including songs, from your old computer to your new computer.
    You may also considering getting some third party programs such as YamiPod to help in this task.

  • Using IPOD nano with multiple PC - song no longer working

    I have 2 nanos and 2 PCs. If IPOD 1 buys a song from PC 1 and then buys a song from PC 2, certain songs bought from PC 1 no longer play on NANO 1 --This happens on just one nano, not both. I can then go to PC 1 and drag the song onto Nano 1 again, the song will now play, but only until I put Nano 1 onto PC 2 again. Support could not help me!!! Says it must be the Nano!!

    Hi Julhic,
    Welcome to Apple Discussions
    Are both your computers authorized? You might want to look at Knowledge Base Document #93014. Is the song still on your iPod? If not you might want to sync your iPod manually.
    Jon

  • HT1386 using iPod nano with new hard drive after original crashed

    My PC hard drive died. My iPod hasa bunch of music on it. I reloaded iTunes on my new drive. Now I can't load any music from iTunes to my iPod without erasing my current content. How do I fix this?

    Transfer iTunes purchases by:
    http://support.apple.com/kb/HT1848?viewlocale=en_USiTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer othre music by using a third-party program like one of those discussed here:
    Copy music
    - To retain app data and other information, connect the iPod to yur computer and make a backup by right clciking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the Backup that iTunes makes does not include synced media like apps and music.

  • Ipod nano with windows98

    Is there any possibility to use ipod nano with window 98 ? How ?

    How I can know about this? I call to call center but they can't answer me!!!

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • I purchased an used iPod nano 4th with many many songs on it,but when i hooked the usb cable to try and change the name,something went wrong.i had to reset it,thinking my music would still be there,but i lost everything! Is there any way to get these back

    I purchased an used iPod Nano 4th.with many,many,many songs and albums on it,but when i plugged the usb cable into my laptop(i am a new comer to computer) i thought i was changing the name and thought i was syncing but something went wrong and everything was gone! is there any way possible to get these back? Please I need Help!!! Thank you!

    Was the music purchased via your iTunes account and/or did you buy it from other sources or copy it from your own CDs, or did the music belong to the previous owner ? If the music was yours then you can sync it back to the iPod via your computer's iTunes. If the music is not still on your computer then have you got a backup of it ? If not then for iTunes purchases you might be able to re-download it depending on which country you are in. If the music was put on the iPod by the previous owner then you will need to buy your own copies of it.

  • Can I use the USB cable of my ipod nano with my iPhone 3G?

    Hi,
    I am a new user of Apple. I have a ipod nano and a iPhone 3G. I wonder if I can use the USB cable for the ipod nano with my iPhone 3G. Just want to make sure if it is 100% compatible. Thank you very much.

    Thank you very much!

Maybe you are looking for

  • HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

    Have had HP Officejet Pro L7590 All-In-One Printer for years.  Always worked fine and I had no issues printing via wireless connection.  Several months ago..  Possibly after a Windows 8 update.  From Windows 8 to Windows 8.1 I have not been able to u

  • MacBook Pro 17" Game Distortion

    I just had my monitor and some internal pieces replaced, and I am getting some funky effects in the game World of Warcraft. I have went threw them and tried all the software solutions, so I figure it is a hardware problem. In the game, I am getting t

  • Creating a new table next to an existing one

    I have attached the table I created...(I'm a beginner....forgive me for being simplistic in design). I want to create a separate table for "Friday" right next to the existing table. How do i get the new table to align to the right of the existing tab

  • Reader XI.  Can't print protected mode doc

    Reader XI.  Can't print protected mode doc. Printer help says to disable protected mode, choose Edit > Preferences and click Security (Enhanced) on the left. Deselect Enable Protected Mode At Startup. Close Reader, restart it, and try to print the do

  • Ios 7.0.6 icon gray installation AIR 4.0.0.1628

    Problem Description: when i try to install an app in ios 7.0.6 the icon remains gray and does not install Steps to Reproduce: update your ios device to 7.0.6 and try to install an app created with adobe air sdk, i have already tried with AIR 4.0.0.16