Using Ipods as External Error

Hi, I have 2 ipods, one a 5th generation 60gb and a 3rd gen w/ 40gb. Whenever I try to copy info to my ipod as an external use, i get this error message: 'The disk destination drive is full please insert new disc' even though i have plenty of space. I have my 'Enable Disk Use' option checked and i boot into disk mode by pressing middle and play/pause. I dont understand, is there some kind of limit to the external use. Whenever i go above 6GB that message comes up. Ive restored both ipods twice, and apple tech people dont know much, despite 3 calls w/ them. How do you fix this???

This may be caused by drive letter confusion on your computer.
Disconnect both iPods from your computer. Let's try assigning one of your iPod a different drive letter; see these steps below:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, connect your iPod to the computer.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
Then, after this is done with one of your iPods, disconnect it, and plug in your other iPod.'
Follow all the above steps again, and assign this iPod a different letter than the previous one. (i.e., 1st iPod is "L", while the 2nd iPod is "Z", as opposed to the same drive letter assigned to both iPods).
For more details, see this Support article: Windows confuses iPod with network drive or hard drive and may keep iPod from mounting
I hope that helps you.
-Kylene

Similar Messages

Using ipod as external drive

Notice by apple:
Do not format iPod to erase songs or playlists
Do not use a disk utility program, such as Disk Utility, Drive Setup, or Windows Explorer, to erase iPod. Erasing songs from iPod this way can disable its music playing capabilities and you may have to update or restore iPod to get it to work again.
Okay, So If I want to use the ipod as an external drive and I use explorer to copy files to ipod and erase the same way, there should be no problem right? I think what they are talking about is the actual files that are encoded that ipod copies and puts in organized directories...
Anyone tried coping exe files or other files using ipod as a hard drive? Why? I wanted to copy itunes to the ipod for when I travel to another location to just copy that program to the hard drive and install there to a computer w/o internet connnection...
Windows XP Pro

Put the iPod into Disk Mode and you can copy any files to the HD. Music files copied this way will not be able to be played on the iPod, though. Always transfer music via iTunes.
It will just take up space that could be used by music files (but that's pretty obvious).
You should have little problem doing what you propose.

Can't use ipod and external HD anyon imac g3 after using it on intel mac...

hi, i've recently bought a intel imac and it has (what else) tiger on it. My girlfriend has an old g3 imac with jaguar on it. Today I connected my ipod to the old g3 imac (because i needed some files, about 10gb) and it didn't appear in finder or in itunes.
After trying some stuff, like resetting and retrying, etc., I went home to get my external HD and again, when i plugged it in, it didn't appear in finder. Strange, because before I had my new computer, the ipod and the HD were connected to the g3 imac all the time and on the intel imac, they still work perfect.
Then, I went to disk-utility and it recognised my HD but when i tried to activate the external HD from there, nothing happened. No error, no message, nothing.
But (and as we say in Belgium, now comes the ape out of the sleeve) when i clicked repair (in disk utility), it said that i didn't have the permissions to activate it...
--it was something like cannot activate dev/disk/blablabla dont have permission something something...
Could it be that my new computer has put some sort of protection on my ipod and external HD? and how can I remove that protection?
Or is there another solution for this strange and dark mystery??????

I have 2 ipods, both would not work on G3 iBook once connected to an Intel iMac. Took me a long time on the phone to Apple to figure this one.
It seems to be a conflict with the 'volume format' of the ipod. Plugging it into an Intel will change the format to 'Mac OS extended (journaled)' for some reason my G3 would not recognise it then. To fix it I plugged ipod to the Intel and went to disk utility. Select the ipod (hopefully you can activate it). Go to the Erase menu and change the volume format to 'Mac OS extended'.
It should stay on that format and work on both computers.
Hope it works
iMac (Intel) Mac OS X (10.4.5)

Using ipod as external hard disk between macbook and PC

Hello
I have formatted my ipod mini to the mac, but I also have a PC at home which I want to transfer files to and from. Can the ipod still be used as an external hard disk between the macbook and the PC or is that not possible?
Thanks

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. XPlay for instance gets good reviews and has the added functionality to let you copy your songs back to iTunes. MacDrive from the same company is not iPod specific it's for connecting any Mac formatted drives, if you want to use your iPod as a removable storage device it will work for that. You can get XPlay and MacDrive at these links:
XPlay 2
MacDrive
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

Using ipod as external harddrive.. problems.

about a year and a half ago I got a new Ipod Classic, which replaced my 4th gen 20g Color display Ipod. It was good timing because about 3 weeks later, the itunes software on my old Ipod crapped out. It no longer synced with my computer. BUT the hard-drive space still worked, and my old Ipod turned into a great 20g Flash drive. I used it for about 6 months like this before I went abroad for a year.
I recently returned and have been looking on my two computers and external hard-drive for some important files (namely, my entire senior thesis project). I haven't been able to locate these files, and suspect they may be on my old Ipod. But, when I plug it in to the computer, nothing comes on the screen. It says "charging Ipod, Do not Disconnect" but it does not show my Ipod as being connected anywhere on my computer, therefore I cannot eject it properly.
Anyway, what I am asking I guess, is there anyway to get the files off of the Ipod? Is there something with my system that might be causing it problems? Could I possibly take it to the Apple store to have my files recovered, or am I looking to go to another sort of professional to recover them?
any info would be greatly appreciated.
I am currently running Mac OS X version 10.5.6 on a macbook pro.
Previously it was connected to a PC in my school lab. I assume it was still running Windows XP. I've tried it on our Home PC (windows XP) with no luck.

Did you try it with a different cable or did you use the same cable at both locations?
If it isn't the cable, you might consider getting an external enclosure for 1.8" drives to get to your data.
For example...
http://www.dealextreme.com/details.dx/sku.9183
$10.42 shipped (from China of course).
Patrick

Using iPod as external file source for iTunes

I have a laptop and a HUGE iTunes library which is stored on an external HDD.
I'm taking the laptop on vacation (and not the external drive) which means that I won't have an iTunes library while on the trip.
I don't want to transfer GB of audio files onto my laptop HDD just for a trip but I would like to use iTunes.
I wonder if I can -
1a. Set my iPod to act as a portable drive (I forget what this setting is called)
1b. Mount my iPod as an external drive
2. Create a new iTunes library on the laptop HDD
3. Set the preferences to import songs data but to leave the files where they are (I forget what this setting is called exactly).
4. Import files found on the iPod external drive.
I realize that iTunes would only be able to play music when the the ipod was mounted as a HDD.
Does that sound like it would work? Is there anything I'm forgetting?
Thanks.

You don't have to do any of that. Is your iPod large enough to hold your entire library? If so, all you have to do is set your iPod to MANUAL manage. Under manual manage, you can now hook the iPod up to ANY computer running iTunes and play the stuff directly from the iPod in iTunes.
To be safe, you still may want to start a new library on your laptop and just leave it empty. Then you can switch to that library when on vacation, play anything you want out of the iPod and not have to worry about accidentally messing something up with your normal library if/when it tried to access stuff from the external drive that is not with you.
When you get home, switch back to your normal library and change the iPod back to Auto update. Nice thing about this is when you change back to auto, your iPod will sync back to your original library and all the updates like ratings, play counts, last date played, etc. will sync back.
You can test it out right now. Just change your iPod to manual manage, APPLY, then go ahead and play right out of the iPod in iTunes.
Cheers,
Patrick

Using iPod as external hard drive?

So when I bought my ipod classic a month ago, the guy in the store told me I could use it as an external hard drive and store files on it for whatever reason. My friend connected the ipod to his computer, which is a pc, and stored a LOT of .jpeg files of pictures in a specific folder. Now, when I plug my ipod into my mac, I can't find them ANYWHERE. I don't even know how to access the hard drive or do anything he did on the pc. Help please.

Okay, the only helpful knowledge I know on this is that you need to set the iPod on disk mode which is done on the iPod's screen when you sync it with iTunes.
Message was edited by: LunarKnight

Using iPod as external hard disk....

I'm sure this topic will have been covered, but I can't find an answer to my problem, which is......
I want to use my iPod as an external hard disc; according to the instructions, I should be able drag music from the iPod Nano (bought just 4 weeks ago) into iTunes (when switching computers, for instance). I have followed the instructions, and clicked on Enable Disk Use, then shut iTunes down; apparently I should be able to see Ipod in Windows Explorer.....but what the heck do I do then?
I'm afraid if I try to restore my iPod I'll loose all the music on it - and it's full - and I don't want to that to happen.
Please help! All help appreciated!
iPod Nano Windows XP

You are trying to use your iPod as a hard drive to transfer music to another computer?
http://docs.info.apple.com/article.html?artnum=300173

Moving iTunes library from PC to Mac using iPod as external disk drive

O.K. I read the tutorial on this website on this topic and found it helpful though I haven't tried it yet. My question is - the tutorial examples assumed I would be using 2 macs. But, I am moving the iTunes library from a PC to a Mac (using the iPod as an external disk drive). Is that possible?

Thanks Erik. O.K....one more question... My PB obviously came w/ iTunes installed, and I have already added to it's library. So, is it possible to move my old iTunes library (on the PC) onto my new PB and keep the all of the songs from the PC's library and the Mac's (basically consolidate both libraries into one)? Or will it replace the Mac's library with the imported library from my PC? Thanks for your help.

Is it possible to use iPod as external disk without installing iTunes?

I was wondering this because I would like to be able to use my iPod as an external hard drive at school. I cant install iTunes on their computers without administrator rights. I just want to know if I can connect it without having to go through iTunes to saftly disconnect.

Assuming you can use the iPod with iTunes at home, connect it to iTunes and change the setting to manual transfer. This automatically enables disk use.
Your iPod should then show up on any other computer as a hard disk without the need to install iTunes.
You can eject the iPod after use with the “safely remove hardware” icon in the system tray next to the clock (looks like a grey rectangle with a green arrow above it). Click on this then select your iPod. Or through Windows, select start/my computer, right click on the iPod, select eject.

Using iPod with external Hard Drive connected to laptop

Is there a way to use the iPod video and an external hard drive connected to a Dell Latitude D600 laptop at the same time? I can use one or the other but not both. When both are connected using the usb ports on the back of the laptop, the iPod is not recognized, the message pops up saying unknown device. I do have the laptop connected to the power outlet. I have no problem using both when I am connected to the usb ports on the docking station at work, only when I have the stand alone laptop at home. I am using a 250GB Maxtor Personal Storage 3100 hard drive.
I found an article on CNet that suggested updating the bios and laptop software. I did this and still have the same issue.

You might have a drive letter conflict.
Both USB devices might be trying to use the same drive letter, and they're sort of "fighting" with eachother over who gets the letter assigned.
Try changing the drive letter of one of your devices.
You can use this article as a reference for changing the drive letter.
http://docs.info.apple.com/article.html?artnum=93499

Moving iTunes library from old computer using iPod gives me error message?

My old computer recently died. I have a new computer-- a Vista-- that also has iTunes. I am trying to move my iTunes library from my old computer to the Vista using my iPod, which I heard you can do. My iPod has all my old computer's songs on it.
I used the 'transfer purchases' command, and all of the songs from the iPod appeared on the Vista's iTunes screen. However, any time I tried to play one of them, an exclamation mark appeared next to it and I got an error message saying "Itunes cannot play this song because it cannot locate it" (or something like that).
Not all of the songs have this problem. Some of the transferred songs can play just fine. But over half of my transferred songs have that damned exclamation mark next to them.
Here's a screenshot of what I mean:
http://i43.tinypic.com/2090uic.jpg

Hi,
Probably the best and easiest way to do this, is the following:
First Enable "Disk Mode". You can read [here|http://docs.info.apple.com/article.html?artnum=93446] more info about this. Then make sure that the "Keep iTunes Music folder organized" option is checked in iTunes Preferences:
. Open iTunes.
. From the Edit menu, choose Preferences.
. Click the Advanced tab in the Preferences window and then click the General tab.
. Select the "Keep iTunes Music folder organized" checkbox.
After doing that, move the entire iTunes folder to the iPod Disk.
Once, you'll transfer the library to other computer using the same platform, this will not only copies your audio files over, it also retains your ratings and playlists...
On your new computer:
. Open iTunes.
. From the Edit menu, choose Preferences.
. Click the Advanced tab in the Preferences window and then click the General tab.
. Click the Change button in the iTunes Music folder location pane.
. In the Change Music Folder Location window that appears, navigate to the location where you would like your new Music folder to be created.
. Click the Make New Folder button in the Change Music Folder Location window.
. Enter the name of the new iTunes Music folder.
. Click OK in the Change Music Folder Location window. Click OK in the Advanced window.
. From the Advanced menu, choose Consolidate Library.
Hope this helps!
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

Using Ipod as External Harddrive

I want to store some files..mostly music files..on my video ipod. I've read to put my ipod on the external disk setting, and then to use Yamipod to put the music files back on my computer when I need them...However I still have some questions and I'd appreciate if someone could help me out.
Does this mean once I've put on this setting, my songs leave my itunes folder and are permanently stored on the ipod?
Is there a way to choose which music files I want permanently on the ipod and no longer in my itunes folder...and which i just want to leave the way they are..(updated each time i plug my ipod in to itunes)?
When I plug in my ipod will I be able to play the music I've stored on my ipod in Itunes?
Sorry if this was confusing..Thanks..Camila

then to use Yamipod to put the music files back on my computer when I need them
Why not use iTunes?
Does this mean once I've put on this setting,
You mean "Enable disk use"?
my songs leave my itunes folder and are permanently stored on the ipod?
No. It means you have simply copied them onto the iPod.
It is very confusing. Use iTunes to load the iPod.
Why are you copying your music files to the iPod with Enable disk use?

Use iPod as external HD

Hey!
I have an old glass-front 80gb clickwheel ipod. I want to use it as an external HD, now that I have an iPhone I have no use for the ipod as a music device. Other than just formatting it with disk utility, is there something else I should/need to do?
Ultimately I'm trying to use it as a hard drive extension for my xbox.
Thanks!

it uses a zif connector. look at http://www.amazon.com/SANOXY®-1-8-inch-Enclosure-Connector-Assorted/dp/B001OYCJH I or http://www.ebay.com/itm/1-8-ZIF-LIF-Hard-Disk-Drive-iPod-HDD-Enclosure-Case-USB- /190337129207 to buy one.

Using iPod as external drive on Time Capsule

I have searched the web for more than an hour without really finding anything on the topic. Is it possible?
When I connect the iPod to the TC, I can't find it in Finder. iPod screen does light up, but battery meter doesn't change to "charging".
I have checked with some old usb stick, and everything seems ok.

Unfortunately, as you have discovered, an iPod won't work with the USB port on the Time Capsule. The controller inside will only recognize certain devices. See this KB articel for the uses of the USB ports on various Airport devices:
http://support.apple.com/kb/HT2421
Cheers!

Using Ipods as External Error

Similar Messages

Maybe you are looking for