Using IPSec to connect from Windows 2012 to a Sonicwall

In order to establish an IPSec connect from a Windows 2012 Server to a SonicWall, you must first connect to the sonic wall via L2TP or PPTP? 
Can someone confirm this is correct?
Thanks. 

Hi,
Thank you for posting in Windows Server Forum.
As per my research, generally when we are implementing IPsec connection we use PPTP as a connection method. PPTP, L2TP, and SSTP depend heavily on the features originally specified for Point-to-Point Protocol (PPP). PPP was designed to send data across dial-up
or dedicated point-to-point connections. For IP, PPP encapsulates IP packets within PPP frames and then transmits the encapsulated PPP-packets across a point-to-point link. PPP was originally defined as the protocol to use between a dial-up client and a network
access server.
More information.
VPN Tunneling Protocols
http://technet.microsoft.com/en-us/library/cc771298(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Similar Messages

  • Can I migrate physical hard disks in storage space from Windows 2012 R2 to Windows 2012?

    Hi,
         We have a Windows 2012 R2 server.  It's running storage space with 10 hard disk in Parity mode.  We would like to move the hard disks from Windows 2012 R2 server to Windows 2012, so that we can "free" our windows
    2012 R2 server to do something else.   Can we just unplug the hard disks in Windows 2012 R2 and hook it to Windows 2012 server without any data lose?  If we can do it, what's best "formal" procedures to do it?
    Thanks,
    Tak

    Hi Tak,
    Storage space will be recognized in different servers (and even clients) which support.
    If it is just a "Parity mode", you can turn off the computer, unplug and connect these disks to the new server directly. 
    If any Windows Server 2012 R2 new feature is involved, it may not work in Windows Server 2012 but it should not damage your data and you can still connect these hard disks back to original server.
    However, backup important files is always recommended. 
    If you have any feedback on our support, please send to [email protected]

  • Why MS remove Exchange from Windows 2012 Essentials?

    Why MS remove Exchange from Windows 2012 Essentials and support just with Office 365 and Exchange on-premise?

    I don't think Microsoft has ever said exactly why.  Some possible reasons, pick one (or more).
    1.  Because Exchange has become too resource intensive.
    2.  Because Microsoft wants to drive small business to O365.
    3.  Because Small and Medium business were already flocking to O365 and abandoning on premise Exchange.
    4,  Microsoft built out all those expensive data centers and needed someone to use them for something.
    5.  Hosting Exchange on the DC has always violated best practices, now that there are alternatives no need to continue.
    6.  All of the above.
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • Errors connecting from windows

    i try and connect from windows and it gives me this:
    [2006/10/24 21:39:25, 0] pdbods.c:odssamgetsampwnam(2327)
    odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'XXXX'!
    funny thing is, if i connect using ADMIN and enter propper password, it works fine
    it seems windows is trying to autofill the username (that is logged into windows) in the XXX field, and it doesn't match the server's account name.
    thanks in advance!!

    We're having something similar to this where Entourage users are apparently handing off the incorrect user name and password and thereby disabling their Apple user account on our mail/webmail OSX server.
    I don't know how to stop the accounts from being disabled, nor do I know when the user has been automatically disabled by the server. We only know when the customer contacts us (which can't be by email).
    This has already cost us some accounts and business.
    Users who are not Windows or who are not using Entourage are having no problem. Since the problem also happens with Mac Entourage users, it may have more to do with Entourage than Windows.
    Anyone know how to set the authentification of OSX or Entourage to be more friendly?

  • Connecting from Windows

    I have set up a database on Linux that I want to be able to connect from a windows box using SQLPlus or anything similar. I have run the netassistant and made the profile only accept TNSNAMES connections. I then created a net service name using the wizard. I then created a listener and saved the configuration. I looked at tnsnames.ora, sqlnet.ora, and listener.ora and they all looked correct. I start the listener and it starts fine but without any services which according to ORACLE you don't need to set any up, the database will dynamically register itself with the listener. I can telnet to the linux box fine. If I do a tnsping on the linux box to the services name the I want the listener responds. When I try to log in using SQLPlus 8.0 from windows I always get a TNS error that it could not resolve the service. Am I missing something along the way. Any help would be great. Thanks in advance.
    --Paul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Can you give me some help with setting up tnsnames.ora and listener.ora?

  • Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine

    Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine...
    I tried to install driver on connecting PC, i tried to install printer as Local printer with local port - \\WIN7-32bit\HP PSC 1310 Series\ - and  i got access denied, and before i reinstall Windows on 64Bit machine its worked correctly... anyone know how to solve this problem ?
    *Edited*
    When i connect it on 64 Bit machine printer requesting driver *.inf and not specific file...
    i try to install 64bit driver on 32 bit machine in sharing options and they didn't support it...

    More than likely, you are receiving the access denied error because there may not be a HomeGroup in place.
    To handle networks securely with Windows 7, Microsoft took a different approach.  A HomeGroup essentially creates a trust among all the devices in that home group.  If a device is not in that homegroup, then that system will essentially be denied access.
    Click on Install a printer on a home network to get basic steps to install a printer in a network environment.
    Click on HomeGroup: recommended links to get more information about Home Groups, including setting one up.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Connect Oracle 9 client from windows 2012 server to 9.0 oracle database

    I have windows 2012 64 bit with installed oracle 9.0 32 bit client
    and i want to connect to oracle 9.0 64 bit server installed on windows 2003 R2 64 bit
    Is it possible to make this connection because when i have tried to connect received this error ORA-06413 connection is not open

    942609 wrote:
    I know that oracle client 9.2.0 is too old but company about i work have tests which run on this systemIf you are stuck using antiquated versions of software, the company really ought to stick to antiquated versions of the operating system as well. Trying to combine versions of the Oracle client that weren't even certified on Windows 2003 with a bleeding edge Windows 2012 system is a recipe for pain and suffering. Even if you appear to get things working, there are any number of bugs that will likely crop up over time due to the massive version incompatibility.
    If i understood right i can't make connection between oracle 9.2.0 32 bit client installed on windows 2012 to connect to oracle server 10 i?As others have pointed out, you probably can though you'll need to change the firewall rules. As others have stated, the firewall changes you'll need to make should probably be the same for a 9.2 client and a 10.2 client. But if you're determined to work with highly unsupported combinations of software, you're likely to have to embrace the idea that you're going to be blazing some new trails and that you'll have to spend a decent amount of time debugging issues that arise from your very unique combination.
    Justin

  • No touch only mouse pointer from iPad connected ro Windows 2012 R2 Terminal server

    When I connect from my iPad to my Windows 2012 R2 server i get the mouse pointer and the touch screen is not working. At first it did, but after opening, i think it was firefox, it changed into a mouse pointer.
    How to switch it back?
    Using Microsoft remote desktop 8.0.x iPad II

    Hi,
    Tap the connection bar to display the utility bar at the top of the screen. The utility bar enables switching between mouse modes.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • No touch only mouse pointer from iPad connected to Windows 2012 R2 Terminal server

    When I connect from my iPad to my Windows 2012 R2 server i get the mouse pointer and the touch screen is not working. At first it did, but after opening, i think it was firefox, it changed into a mouse pointer.
    How to switch it back?
    Using Microsoft remote desktop 8.0.x iPad II

    Hi,
    Tap the connection bar to display the utility bar at the top of the screen. The utility bar enables switching between mouse modes.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Errors using ICertView connection from Windows 7 to Server 2003 SP1

    Hello!
    I have a RootCA on windows server 2003 SP1. I connect to certificate store remotely using ICertView interface from Certadm.dll to retrieve issued certificates. This scheme works fine from windows XP, but when I call method openconnection (no matter which
    way: from powershell, certutil, from code directly) I get following errors: 
    1. from host not in AD domain  "CCertView::OpenConnection No more data available. 0x80070103 (WIN32/HTTP: 259)" 
    2. from AD domain joined host error is "0x800704C7 The operation was canceled by the user."
    However, ICertAdmin interface works on Windows 7 without any problems.
    Someone tells me that few years ago hi had checked this scheme and it`s worked! 
    after this article http://support.microsoft.com/kb/892500 I have a suspicion thah installed SP1 broke DCOM permissions. I configure permissions on COM host according to this article but connection won`t work... 
    On Windows 7 I have used 2 versions of certadm.dll - native windows 7 and from Server2003 - all the same :( 
    Can somebody help me make this work or explain why it is impossible?
    Best regards.
    -- Stanislav.

    After enabling debug logging for enrollment by certutil
    -setreg enroll\debug 0xffffffe3  and running certutil –view I have get following
    1. from host in domain:
     certutil –view :
    ========================================================================
    402.511.948: Начало: 19.05.2014 13:34 43.913s
    402.516.0: certutil.exe
    402.520.0: GMT + 4,00
    301.3888.0: certcli.dll: 6.1:7601.17514 retail
    301.3888.0: certutil.exe: 6.1:7601.18151 retail
    301.3788.465:<2014/5/19, 13:34:43>: Командная строка: CertUtil -config hostname\caname -view
    419.5898.0:<2014/5/19, 13:34:43>: 0x0 (WIN32: 0)
    705.1857.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    705.2226.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    705.3007.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    1207.632.0: 0x800704c7 (WIN32: 1223)
    1207.705.0: 0x800704c7 (WIN32: 1223)
    443.258.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    316.1383.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    301.3792.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    301.3807.509:<2014/5/19, 13:34:43>: Состояние команды: Операция была отменена пользователем. 0x800704c7 (WIN32: 1223)
    402.377.949: Конец: 19.05.2014 13:34 43.991s
    2. from standalone host
    402.511.948: Начало: 19.05.2014 14:01 22.908s
    402.516.0: certutil.exe
    402.520.0: GMT + 4,00
    301.3888.0: certcli.dll: 6.1:7601.17514 retail
    301.3888.0: certutil.exe: 6.1:7601.18151 retail
    301.3788.465:<2014/5/19, 14:1:22>: Командная строка: CertUtil –config
    hostname\caname -view
    429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904DC, comment: AcceptSecurityContext error, data 52e, v1db1
    429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904F8, comment: AcceptSecurityContext error, data 52e, v2580
    812.494.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
    805.233.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
    804.293.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
    705.429.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044): Ignored!
    705.2231.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    705.3007.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    1207.632.0: 0x80070103 (WIN32/HTTP: 259)
    1207.705.0: 0x80070103 (WIN32/HTTP: 259)
    443.258.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    316.1383.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    301.3792.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    301.3807.509:<2014/5/19, 14:1:23>: Состояние команды: Дополнительные данные отсутствуют. 0x80070103 (WIN32/HTTP: 259)
    402.377.949: Конец: 19.05.2014 14:01 23.457s
    any advise?
    -- Stanislav.

  • Using and synchronizing applications from Windows Server 2012 on local desktop

    I have Visual Studio 2010 on my remote server.  How do I use Visual Studio  software from the server on my local laptop and sync it with the server?

    Of course remote desktop assumes that the system is also properly licensed for Remote Desktop Connections.
    A little clarification on the OP's request might also be in order.
    "How do I use Visual Studio  software from the server on my local laptop and sync it with the server?"
     If you want to run VS on the server, using something like remote desktop services, it runs there and the data stays there.  Obviously you can redirect where VS will store data so that it stores data on your laptop, but then there is nothing to
    automatically synchronize it.  Maybe a more complete explanation of your issue would help.
    . : | : . : | : . tim

  • How To Increase TCP Connections in Windows 2012 Server

    We have installed our Java application in Windows 2012 Server. After running for some time application started showing Connection Time out. We have set TCP Parameters MaxUserPort = 65534 and TcpTimedWaitDelay = 30.
    We are facing the same issue, even after setting the parameters in windows registry. We have verified in our application, "There is no connection pool issue and no thread issue".
    We are using JDK v6.0.29, Tomcat 7, MYSQL 5.5.
    Apart from MaxUserPort and TcpTimedWaitDelay is there any other TCP parameters in Windows 2012 to improve performance of the server and our application.
    2) At the same time we have found that ‘There is sluggishness in I/O process’. Is there any registry parameters to improve I/O performance in the system.
    Thank You.

    Hi,
    You can refer the following article “Tuning TCP” part.
    Windows Server 2012 Performance
    Tuning Guidelines
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Remote desktop connection from windows computer to TC

    hi all,
    what I have: I have a TC 2TB, bought it three months ago.
    what I did: I have set it up at home. Using as base station for all my devices, iphone 4, ipad 2, macbook air and also other laptop. My TC is connected to ADSL modem with an ethernet cable (as expected). with port forwarding option of ADSL modem (in NAT Properties), I managed to forward any connection to TC. I have a static IP by the way.
    what I can do: from work or anywhere else other than my home network, I can connect to my static IP (via "Connect to Server" option in any mac device), it pops up a user name and password window, I login with my TC user name and decive password. In an instant my TC disk is mounted on my desktop, and I can reach all my files in it as if it is an external hard disk.
    what I cannot do: from a windows computer outside my network, I cannot connect to TC. I try to do this through "Remote Desktop Connection". Is this possible? If so how? Is this a problem related to network connection or TC settings?
    aakibar

    You cannot remote desktop into a TC..
    In fact you cannot remote access a TC from windows.. sorry.. but SMB protocol is blocked on the internet.. there are work arounds but no security.. don't do it.
    The only other protocol the TC offers is AFP.. there is no AFP file access software available for windows. You need to use a Mac.
    The best alternative is vpn.. replace your current adsl modem router with a vpn one.. eg draytek.. then you can access your home network. Since I presume when you say you have static ip you mean public IP then vpn is easy (well once setup it is).. reliable and secure.

  • How to Database Connection from Windows 8.1

    Hi, I am a newbee with SQL from Windows Azure.
    Is it possible to see the Azure SQL server in my Windows Explorer browser? Or how to connect to this newly created database from my application. I would like to store the database in the cloud..
    I have installed on my local PC a administration software package. Also installed on another PC the sql express version of SQL.
    But wanted to use the database from Azure instead of my on-premmis sql server.
    Please can some help me out with this?
    Regards,
    Rense Prakken

    Hello Rense,
    There are many tutorials/online documentation available which can guide you as how to connect to a SQL Azure DB from your application. I'm providing you some basic as well as how to articles which you can go through.
    http://azure.microsoft.com/en-us/documentation/articles/sql-database-get-started/
    http://msdn.microsoft.com/en-us/library/azure/ee336282.aspx
    http://azure.microsoft.com/en-us/documentation/articles/sql-database-dotnet-how-to-use/
    http://azure.microsoft.com/en-us/documentation/articles/sql-database-manage-azure-ssms/
    http://msdn.microsoft.com/en-us/library/azure/ee336243.aspx
    http://msdn.microsoft.com/en-us/library/azure/ee621781.aspx
    You also had a question if you can see the Azure SQL DB in your Windows Explorer. The answer to this question
    is NO, but you can certainly see your Azure SQL Database in the Object Explorer in the SSMS (SQL Server Management Studio).
    Hope this helps.
    Thanks and regards...
    __Raman
    New post on SQL Azure Forum.

Maybe you are looking for

  • HTML DB Items Using JavaScript

    I have a page that is based on a SQL Query (PL/SQL Function Body Returning SQL Query). If I call another page from one of the items using a URL such as f?p=&APP_ID.:6:#APP_SESSION#::::P6_ID:#ID# it calls the new page fine. If I try and call it using

  • User exit in SAPMV50A to READ and SAVE TEXT from PO

    Hi Experts, I have an requirement for "Copying PO Header Text to Delivery Text". I have already created TEXT ID's , Access Sequence and assigment to Delivey type in VOXTN. Could you please suggest "User exit in the delivery program SAPMV50A, tcode VL

  • POV in Hyperion Financial Reporting Studio and Workspace

    Hi! I have the following problem. I create a report in Hyperion FinReporting Studio, choose required members in POV. Save report. Then I open it in Workspace and sometimes my chosen POV crushed: sometimes there are no chosen members, sometimes there

  • IPhoto 5.0.4 will not load

    I currently have a ibook G4 with Mac OS X version 10.4.11.  It came with iPhoto 5.0.4 and up until the past two days I have not experienced any problems.  However currently the program will not load.  When I open it states it is loading the photos.  

  • Re-Install DVD Burner?

    The DVD Burner on the MAC will no longer burn DVD's. I can play or read the disc but no burning.  I have tried cleaning the lense, different DVD brands and still get the following error; "The disc can't be burned because an unexpected error occurred