Using ISA port Creative audio card in special situat

Hello,I am?trying a developing little simple operating system which uses hardware for special purpose. And my old?ISA port Creative sound card is a one part of that hardware. For getting?a sound from my system via creative sound card is there any? technical information such a hardware manual etc. for driver developers?regards.

I uninstalled the device through device manager and then reiinstalled the driver - same symptoms.

Similar Messages

Using JMF with two audio cards

Hello,
Is it possible to use two audio cards and have JMF address them independently. I'd like to be able to reference one for recording audio and the other for audio playback (simultaneously).
Thanks,
Ben

It's definately possible, but you may have to interface with JavaSound to do it.
Theoretically, you should just be able to do javasound://0 for one, and javasound://1 for the other. No guarentees, though. You might have to wrap around JavaSound directly to get that level of control.

Distortion using USB port for audio output

I did some research in the Mac Mini community regarding the problem I'm experiencing but most of the posts were several years old so I thought I would start a new thread.
I am using one of the USB ports on my 2011 Mac Mini (2.3GHz, i5) to feed a High Resolution Technologies Streamer II USB DAC which then connects to my audio systems integrated amplifier. The issue I'm experiencing is that I am getting distortion when I first open iTunes and start a music track playing. I can hear the music but it is overlayed with this static like distortion. It seems to happen specifically when I first wake the computer from sleep and open iTunes and try to play a track. If I close and reopen iTunes and start a track playing again the distorion usually goes away and all tracks after the initial distortion play fine. I've done troubleshooting with regards to the HRT USB DAC and made sure the Streamer II is operating on its own USB Bus and I've tried a powered USB Hub to feed only the Streamer II but the distortion continues. So aside from the obvious hardware malfunction possibilities I was wondering if anyone else has experienced this problem. Thank you,

well i dont have the cable yet i just was wondering if that would work. Yes it has bluetooth but i was told you cant use the bluetooth for a modem. Dont know why the phone has the option. How would i set up that option?

Use of Digium 24-port FXO analog cards for FreePBX system

Does anyone have experience with the installation of Digium 1AEX2400 Series cards in a FreePBX distro? I am researching a new system and want to see if anyone has successfully used this hardware before, and if there was any trouble installing the hardware that I should know about. It would probably be installed in a Dell R310 1U server.
I have used 8-port Digium FXO cards for many years now. And yet I find very little on discussion groups for either the 8-port cards or their 24-port equivalent.
Any information would be helpful.
This topic first appeared in the Spiceworks Community

Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference

External Usb Audio Card Popping and Cracking sound with Satellite L500

Greetings,
My name is Boyan and I am from Bulgaria and about an year ago I've bought a satellite laptop from the l500 series ( i can not state which exactly is the model at the moment because my computer is not currently with me and on my user manual the only thing which is stated is that it is for L500/L505/ L500D / L505D . But by memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal because I gave it for repair for the same problem which I will state down below)
The problem with my laptop is that when I plug a Usb Audio card in my laptop I have a cracking sound when live sound is played trough the speakers/headphones from the external card. I've tried numerous audio cards and speakers/headpohnes which work perfectly fine with other computer, including laptops but the same problem keeps on showing up in the headphones/speakers of my laptop when I am using an external audio card to connect them to the laptop.
The problem is prominent only when the sound signal passes trough an external audio card and it is very annyoing since I use my laptop to create music and i've bought an expenssive audio card and speakers which can not be used with the laptop. I've tried 3 models of audio cards:
M-Audio Fast Track Pro
Behringer uca 222
and a simple external 3d sound usb audio card and the problem still appears.
At first I thought that the problem should be software and I should install new drivers although windows 7 automaticaly recognizes and intalls the drivers for the devices and I have sound in them (but with cracks and popps) so i tried using the official drivers sold to me with the audio cards but with no luck: The problem was still there. I tried finding new drivers of the audio cards on the official distributors websited and i've downloaded them but the problem was still there. Then i tried to delete every audio driver on my computer and just use the external audio card for sound but this dint help eighter. I've updated my drivers for my build-in audio card as well but again - no luck.
After that.the frist thing I did when (2 weeks after i bought the laptop) was to contact the store from which i bought my audio card and they stated that the problem may be eighter latency or high voltage from the laptop so they adviced me to try to lower the latency from the settings or to try and see if the problem remains if my laptop is only running on battery. I've tried both things and they didn't help. The audio cards worked without a problem on every other computer I've tried them on except mine. So they said to me that the problem couldnt possibly be from the audio cards .
What I did next was I gave my laptop to the official distributor of toshiba in my country so they can fix my problem. What they said to me was that the problem is caused from the version of windows which was pre-installed on my laptop and that it wasnt compitable with the audio cards (which was bizzar sounding because I've tried them on the same windows and they've worked, just on other computers). So I got back my laptop and changed my operating sistem from Windows 7 Home Premium 64bit to Windows 7 Ultimate Edition 64bit to Windows 7 Ultimate Edition 32bit and on all of those versions the problem was there: whenever I activate a Usb Audio Card and audio signal passes trough it I heard cracks and popps. I even tried isntalling Windows XP but the laptop wants spesific SATA drivers for the installation of Windows XP which although i did find - they didnt help me install XP and I didn't want to go in to the BIOS of the computer to try to put a new one and so on because I am not so sure about that and I could lose my warranty so I said to the official repair store for Toshiba in my town to put XP on my computer to fix the problem but they can't because they are not liscened to operate with software which doesn't have a recipt for its purchase ( which i didnt because i bought my windows xp long ago and i've lost the recipt)
I gave it for repair for the second time telling them that the change of my operating system did not solve my problem and what they did was they changed the whole motherboard on my computer, stating that the build in realtek audio device on my computer is not good enough to support an usb audio card or it maybe broken and they have to change the whole motherboard because the build in card is glued to it, so they did that but my problem wasn't solved. They told me that although I am using and external usb audio card the signal still passes trough my internal one and I have to disable it so i tried disabling it trough the control panel but this did not solve the problem and i do not have an option from BIOS to disable my build-in audio card. Another thing which I thought maybe causing the problem is that the two audio cards aren't working on the same bit rate and Hertz so I set both cards to 16 bit 48000hz DVD Quality (Also tried other options on the 3 cards i have) but...the same thing happend.
They told me that this is just my luck and that the build in audio card doesn't support this external audio cards and I should had been more careful when choosing my laptop at first.
I couldn't accept this awnser for several reasons:
1) This audio cards work on lower version of windows and are supported by much older models of Realtek and much older computers (one of them was bought 2000!!!!! and my laptop is from 2010!!)
2) The guys who were fixing the problem apperantley didn't go in so deep in to my problem because they didn't know what actually the problem was they just knew that there is a problem with the audio card and the computer interacting with eachother, they didnt know that there is cracking during live play from the external audio card.
3) I can not accept the fact that Toshiba is manufacturing models with chipset audio cards which can not support a simple external Usb Audio Card. This is totally unacceptable for me and I truly hope this is not the case!
4)They didn't try my audiocards on an other laptop from the same series stating that they do not have one at their dispossal at the moment so I will go tomorrow to a local store and try the audio cards by my self on the same computer in the store.
What I did now was I gave back my laptop for repair asking for a statement of the problem in wrtting with all details of the problem so I can go to court or ask for a new laptop but I will be charged with some money because according to them there is no problem in the laptop and the problem is that my external audio cards arent compitable with the build in internal chipset audio card. If I give my laptop for repair and there is no hardware problem I will have to pay some money. I will do this but I am now mad, since this will not solve my problem and I am loosing time and money.
What I am asking here is, if you can not help me solve my problem and advice me what to do to fix it, please provide me the details of the chipset build in audiocard on my motherboard, so i can investigate if it is compitable with my external audio cards and contact the audio card dealers to ask them for their opinion. Or if you can tell me with what it is compitable with and with what not, it would be great. I personally think that this laptop should have no problems at all with running a simple external usb audio card but I am asking you, if you know something more about that.
If the problem is from the build in chipset then Toshiba is manufacturing (or at least selling) audiocards which aren't at a normal standart but sadly I cant do nothing about it except complain to Toshiba and never deal whith such productgs anymore. In the other case if this is not true, then my laptop has a problem which is different and I will have to go to court with the repair mans for not fixing my laptop or not giving a new one when I have warranty which will not be Toshiba's fault and It will in a way solve my problem.
I hope you understand how Important this is for me and I hope I resolve the problem as soon as possible.
P.S
I would like to state that I am well aware of the grammar mistakes I have made in the text below and I would like to ask for your apologies as I am not a native English language speaker.

hi i just like to say i had a similar fault though i would be surprised if it causing yours,but you never know,my fault was my laptop lid, [9 months old] it contains the mic ,and when the lid was in a certain angle crackles could be heard worse when i had my external sound card in, it was a faulty membrane [ lid to body] easily missed by engineer because it was the same angle all the time it happened,good luck, PS you English is very good
Message was edited by: sido1

Usb Audio Card - Popps and Cracking Sound.

Greetings,
My name is Boyan and I am from Bulgaria and about an year ago I've bought a satellite laptop from the l500 series ( i can not state which exactly is the model at the moment because my computer is not currently with me and on my user manual the only thing which is stated is that it is for L500/L505/ L500D / L505D . But by memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal because I gave it for repair for the same problem which I will state down below)
The problem with my laptop is that when I plug a Usb Audio card in my laptop I have a cracking sound when live sound is played trough the speakers/headphones from the external card. I've tried numerous audio cards and speakers/headpohnes which work perfectly fine with other computer, including laptops but the same problem keeps on showing up in the headphones/speakers of my laptop when I am using an external audio card to connect them to the laptop.
The problem is prominent only when the sound signal passes trough an external audio card and it is very annyoing since I use my laptop to create music and i've bought an expenssive audio card and speakers which can not be used with the laptop. I've tried 3 models of audio cards:
M-Audio Fast Track Pro
Behringer uca 222
and a simple external 3d sound usb audio card and the problem still appears.
At first I thought that the problem should be software and I should install new drivers although windows 7 automaticaly recognizes and intalls the drivers for the devices and I have sound in them (but with cracks and popps) so i tried using the official drivers sold to me with the audio cards but with no luck: The problem was still there. I tried finding new drivers of the audio cards on the official distributors websited and i've downloaded them but the problem was still there. Then i tried to delete every audio driver on my computer and just use the external audio card for sound but this dint help eighter. I've updated my drivers for my build-in audio card as well but again - no luck.
After that.the frist thing I did when (2 weeks after i bought the laptop) was to contact the store from which i bought my audio card and they stated that the problem may be eighter latency or high voltage from the laptop so they adviced me to try to lower the latency from the settings or to try and see if the problem remains if my laptop is only running on battery. I've tried both things and they didn't help. The audio cards worked without a problem on every other computer I've tried them on except mine. So they said to me that the problem couldnt possibly be from the audio cards .
What I did next was I gave my laptop to the official distributor of toshiba in my country so they can fix my problem. What they said to me was that the problem is caused from the version of windows which was pre-installed on my laptop and that it wasnt compitable with the audio cards (which was bizzar sounding because I've tried them on the same windows and they've worked, just on other computers). So I got back my laptop and changed my operating sistem from Windows 7 Home Premium 64bit to Windows 7 Ultimate Edition 64bit to Windows 7 Ultimate Edition 32bit and on all of those versions the problem was there: whenever I activate a Usb Audio Card and audio signal passes trough it I heard cracks and popps. I even tried isntalling Windows XP but the laptop wants spesific SATA drivers for the installation of Windows XP which although i did find - they didnt help me install XP and I didn't want to go in to the BIOS of the computer to try to put a new one and so on because I am not so sure about that and I could lose my warranty so I said to the official repair store for Toshiba in my town to put XP on my computer to fix the problem but they can't because they are not liscened to operate with software which doesn't have a recipt for its purchase ( which i didnt because i bought my windows xp long ago and i've lost the recipt)
I gave it for repair for the second time telling them that the change of my operating system did not solve my problem and what they did was they changed the whole motherboard on my computer, stating that the build in realtek audio device on my computer is not good enough to support an usb audio card or it maybe broken and they have to change the whole motherboard because the build in card is glued to it, so they did that but my problem wasn't solved. They told me that although I am using and external usb audio card the signal still passes trough my internal one and I have to disable it so i tried disabling it trough the control panel but this did not solve the problem and i do not have an option from BIOS to disable my build-in audio card. Another thing which I thought maybe causing the problem is that the two audio cards aren't working on the same bit rate and Hertz so I set both cards to 16 bit 48000hz DVD Quality (Also tried other options on the 3 cards i have) but...the same thing happend.
They told me that this is just my luck and that the build in audio card doesn't support this external audio cards and I should had been more careful when choosing my laptop at first.
I couldn't accept this awnser for several reasons:
1) This audio cards work on lower version of windows and are supported by much older models of Realtek and much older computers (one of them was bought 2000!!!!! and my laptop is from 2010!!)
2) The guys who were fixing the problem apperantley didn't go in so deep in to my problem because they didn't know what actually the problem was they just knew that there is a problem with the audio card and the computer interacting with eachother, they didnt know that there is cracking during live play from the external audio card.
3) I can not accept the fact that Toshiba is manufacturing models with chipset audio cards which can not support a simple external Usb Audio Card. This is totally unacceptable for me and I truly hope this is not the case!
4)They didn't try my audiocards on an other laptop from the same series stating that they do not have one at their dispossal at the moment so I will go tomorrow to a local store and try the audio cards by my self on the same computer in the store.
What I did now was I gave back my laptop for repair asking for a statement of the problem in wrtting with all details of the problem so I can go to court or ask for a new laptop but I will be charged with some money because according to them there is no problem in the laptop and the problem is that my external audio cards arent compitable with the build in internal chipset audio card. If I give my laptop for repair and there is no hardware problem I will have to pay some money. I will do this but I am now mad, since this will not solve my problem and I am loosing time and money.
What I am asking here is, if you can not help me solve my problem and advice me what to do to fix it, please provide me the details of the chipset build in audiocard on my motherboard, so i can investigate if it is compitable with my external audio cards and contact the audio card dealers to ask them for their opinion. Or if you can tell me with what it is compitable with and with what not, it would be great. I personally think that this laptop should have no problems at all with running a simple external usb audio card but I am asking you, if you know something more about that.
If the problem is from the build in chipset then Toshiba is manufacturing (or at least selling) audiocards which aren't at a normal standart but sadly I cant do nothing about it except complain to Toshiba and never deal whith such productgs anymore. In the other case if this is not true, then my laptop has a problem which is different and I will have to go to court with the repair mans for not fixing my laptop or not giving a new one when I have warranty which will not be Toshiba's fault and It will in a way solve my problem.
I hope you understand how Important this is for me and I hope I resolve the problem as soon as possible.
P.S
I would like to state that I am well aware of the grammar mistakes I have made in the text below and I would like to ask for your apologies as I am not a native English language speaker.

hi i just like to say i had a similar fault though i would be surprised if it causing yours,but you never know,my fault was my laptop lid, [9 months old] it contains the mic ,and when the lid was in a certain angle crackles could be heard worse when i had my external sound card in, it was a faulty membrane [ lid to body] easily missed by engineer because it was the same angle all the time it happened,good luck, PS you English is very good
Message was edited by: sido1

Front case panel audio ports+Creative Sound Blaster X-Fi XtremeMusic

Hi, i am, kinda new, I purchased a Creative Sound Blaster X-Fi... Anyways I was wondering if it was posible to hook up my front audio/mic port to my card. Please anyony tell me what you think, and if this card is etended to be used for gaming...
Thanks

cold wrote:
Hi, i am, kinda new, I purchased a Creative Sound Blaster X-Fi... Anyways I was wondering if it was posible to hook up my front audio/mic port to my card. Please anyony tell me what you think, and if this card is etended to be used for gaming...
Thanks
You need to make connection by yourself. Here are instructions fo Audigy 2 Zs.
NOTE: X-Fi's J (Proprietary connector) pin order (and colour of the connector) may vary from oreder of Zs's (like it did on Audigy 2). You can easily find the pins for I/O by trying or measuring.
jutapaMessage Edited by jutapa on 02-0-2006 05:09 PM

Creative x-fi extreme audio card quest

I have a new HP Pavilion with the creative x-fi extreme audio card. My question is, when I open up the entertainment mode and look at the tabs I don't have any option button for Dolby. How can I output Dolby surround sound? I have Logitech x-30 5. speakers but no option for Dolby output.

I am using HP DVD player. So I set that within the player at SPDIF? I still don't understand why I dont have the option in the creative dashboard. Doesn't the card support Dolby? I am pretty good at understanding all things video but this sound thing really confuses me. I thought SPDIF is for digital optical output to digital speakers? Can I get dolby with 5. analog speakers?

Which audio cards can be bus powered using the Thunderbolt to firewire adapter ?

Hi
I was surprised to hear that the new TB to FW adapter let pass only 7W maximum, when the official Firewire specifies 7W _minimum_. On paper this means that my RME FireFace400, for example, can't be bus powered any more since it needs 13 w.
I think a list of TB > FW adapter compatible audio cards would be useful for all potential MB Air and MBP Retina users who are not ready to carry external batteries all the time

Using the Ultralite with FW-TB adapter here without issue... with or withou external power.. though admittedly i use with with an external power supply 90% of the time.
So, check the adaptor itself.. Some of them have been reported as having loose connections.. when plugged into the Mac... so shut down your MBP (Important to do this.. don't just restart it or put it to sleep) take the adaptor itself out of the back of the Mac... and reinsert. Wait at least 2 minutes (Also important..) and then start Mac up and it should reset and be back to normal operation.
If that doesn't work.. try doing a full PRAM reset too...
https://support.apple.com/kb/PH4405
No idea about Win 8 because i don't use it... but it does work fine with Win 7 and the correct drivers... Just make sure you install/update to the latest Boot Camp (Don't even think about trying to use Audio stuff via any of the Windows emulators/virual rigs....such as VMware Fusion for example.. You are asking for lots of trouble trying that...) and it's drivers.. for the FW to TB adapter to be properly recognised by Win 7...
http://support.apple.com/downloads/#bootcamp

How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
But in BIOS is possible set only disable or auto-detect. When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard. Please tell me, what can I do for enable both audiocards ?

It's been awhile but as I promised here is my update:
I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

I have lost all sound on macbook pro 10.6 and in ITunes can no longer play any cinema or tv shows purchased. I believe it may have been caused by recent use of mini-display port Toslink Audio to the TV. What can be done?

I no longer have any sound on my macbookpro 10.6.8, not even beginning chime.
Furthermore, I find that I no longer have any images as well as no sound, from any
of my Itunes cinema, tv show purchases, etc.
I recently watched last week a couple of tv episodes through my TV
using a Mini Display Port + Toslink Audio purchased at Apple.
I use this device occasionally and haven't had any problems til now.
Any suggestions to right the problem?.

In System Preferences>Sound do you have your internal speakers set as the output source?
You may have toggled on optical output with the Toslink cable - check to see if there's a red light coming from the port. If so, quickly plug and unplug a set of headphones for a number of times to see if you can toggle the switch back from optical to the internal speakers.
Good luck,
Clinton

I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my hous

Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

Can I use HDMI port on my Macbook Pro for digital audio INPUT?

Trying to find a way to get digital audio input to my new MBP with retina. HDMI supports audio and video, so can I use that port as an input?

It is not recommenced to use TimeMachine in a partition, either on the boot drive or externals because of problems in the past with that arrangement.
You also need hardware protection in addition to software protection.
If you want to do what I do, which is have a second 50% partition bootable clone of the first.
1: Use BootCamp software to create yourself a 50% sized partition, then exit the program. (you also can do it in Disk Utility, but it's tricky)
2: Head to Disk Utility and select the BOOTCAMP partition and change it's name and format to OS X Extended Journaled.
(To map off bad sectors in advance, use Disk Utility Erase with the next to last on the right selection, improves reliability and makes for faster reads)
3: Download Carbon Copy Cloner, now select your Macintosh HD partition and clone it to the second partition.
4: Whenever you want to boot from the second partition, just hold the option key down on the keyboard to select it to boot from.
You can access the folders on the second boot partition as well, to grab deleted files you accidentally erased (which is a rare thing for most to occur) however you should leave it alone and as a clone.
You can update the clone when you need to, or schedule it to run automatically.
You should also do this occasionally with a external drive, as the internal drive can die and take both partitions with it.
I currently do this with my laptop, that way if I'm mobile and have a serious issue, I can boot from the cloned partition in seconds without carrying a drive around. If I need large space for something I wasn't aware of, I can erase the clone partition and later clone it again.
Software does all the work, just pick a time your not using the machine and let it work. Painless really.
Most commonly used backup methods

Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.

Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.

Hello Hellraiser24,
This question has actually been discussed in another thread here:
http://forums.ni.com/ni/board/message?board.id=170&message.id=95895&requireLogin=False
I hope this helps,
E.Lee
Eric
DE For Life!

Can I use the optical digital audio cable to connect INSTEAD of the hdmi? My tv only has 2 hdmi ports, and they're both taken

Can I use the optical digital audio cable to connect INSTEAD of the hdmi? My tv only has 2 hdmi ports, and they're both taken

I'm afraid that's very misleading and inaccurate.
Firstly an adapter won't work, it would need to be a converter and then if it's a compliant converter it won't let you watch HDCP protected content such as that from netflix or from the iTunes Store.
Secondly, whilst I'm not going to debate whether component or HDMI is better, component is certainly not better if it's been converted from an HDMI signal. You can't make anything better by simply converting it to another type of signal.

Using ISA port Creative audio card in special situat

Similar Messages

Maybe you are looking for