Using iTV Link

The cable MONSTER iTV Link is compatible with the iPOD Classic 80GB to view videos and photos on a TV?

No. You need a cable from Apple.
http://docs.info.apple.com/article.html?artnum=300233

Similar Messages

Using Monster iTV Link to connect to 42" Plasma

I have a 12' G4 iBook bought in October 2003.
I want to use the Monster iTV Link cable to play DVDs from te iBook and display them through my Panasonic Viera 42" Plasma TV.
Are there any issues I should be aware of, or is this a straightforward
process?
Any advice at all would be much appreciated.
Thanks in advance.
Kieran

Check out the resolution of your plasma. As i can assume it is wide screen... Also try to connect it via regular monitor cable. Besides this adapter goes with your laptop. It will be much better. DO NOT FORGET THAT YOUR iBook IN STANDARD MODE COULD WORK WITH EXTERNAL TV OR MONITOR IN MIRRORING MODE ONLY. To unlock possibility to work in extended desktop mode you could use SSD (Screen Spanning doctor). Suggesting you to use it as resolution of your laptop monitor and plasma is different.
Ask if something is not clear.
Ivan

Monster iTV Link for Macbook- Mini-DVI ports different...

I have been watching movies etc. on my TV through my 14" G4 iBook for the last year using the Monster iTV Link with the mini-DVI end. I recently bought a Macbook and expected to do the same with it, but the mini-DVI ports are a different shape!
I have scoured the internet for some information on different mini-DVI ports but have come up short. Can someone explain why Apple would install a different mini-DVI port on the Macbook? Or not install an S-video?
Regardless of why they did this, I now need a new adapter or Monster needs to make a new iTV Link cable for Macbook. Has anyone seen an iTV link for Macbook? Is there one out there I can use?
I am assuming my other option is to buy the mini-DVI to video adapter, use the audio part of the Monster cable I currently have and get a S-Video cable. However before I acquire more cables and adapters...
Can someone confirm that the the Mini-DVI end of the Mini-DVI to Video adapter is the correct shape (version) for the MacBook.
THANKS
Macbook Intel, 14" G4 iBook Mac OS X (10.4.7)

Welcome to Apple Discussions!
It would appear the Monster guy is confused what cable you got. The iTV cable I bought up on Google has the standard round-din S-Video connector found on 15" and 17" Powerbook G4s of the same generation, but I don't think that is found on the 12" Powerbook. What you need is a DVI to S-Video connector to hook up the iTV cable from all indications.
This may be what you are looking for:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M92 67G/A

Monster ITV Link

HI guys
after seeking advice from apple over the phone as to the best way to connect my macbook to my TV they advised I get a Monster ITV Link cable with a scart adapter. The picture displays by using this but in black and white, is there anything I can do?
Thank you for your help

hey there & welcome to Discussions.
i have a Monster iTV link w/ miniDVI> S-video. also has a 1/8" stereo mini plug to stereo RCA plugs. 10 foot cable made for a 12" P'Book G4. works. has come in handy.

Monster cable itv link

Hi
I was just wondering if I can use the MonsterCable iTV Link wire to connect my MacBook to a television like I used to do with my iBook G4 14"? Do I need some sort of adapter?
Thanks.

Hi.
I have problems with connecting the cable.
The cable i have used to connect straight into the audio jack and mini-VGA (as I've learned here) of my iBook. which looks like this:
http://upload.wikimedia.org/wikipedia/en/thumb/2/2b/Mini-VGA.jpg/300px-Mini-VGA. jpg
My MacBook has a port, but I understand it is a mini-DVI port like in this picture
http://upload.wikimedia.org/wikipedia/commons/thumb/4/4f/Kobushi-mini-dvi.jpg/30 0px-Kobushi-mini-dvi.jpg
So I guess I need some sort of mini-VGA to mini-DVI adapter.

Monster iTV Link Cable

hey there all,
just been reading some posts & thought i'd pass this along. i've been using a Monster Cable to connect my MacBook to my Olevia 26" 16:9 LCD HD monitor/TV. it's the iTV Link cable for the old 12" PowerBook, which also had video out over a mini-DVI connector. the cable is 10 feet long, has a mini-DVI + 1/8" stereo plug on the Mac end & an S-Video + 2 RCA plugs on the TV end. i've set my MacBook for extended desktop & use the external monitor w/ Final Cut Express to display the Canvas. i know it's not the greatest for "real serious work" but to be able to be in bed & work on a project from an external FW hard drive as opposed to going downstairs & firing up the "Big Mac" it's pretty cool, also for watching a DVD on the bigger screen. & once i set the extended desktop it's easier to work in FCE as opposed to sending signal over firewire to my cam/deck then to a TV, because the MacBook sees the TV as 2nd computer display(it shows the desktop wallpaper). the TV is set as follows: resolution 1024 x 768 @ 60 Hz(NTSC), millions of colors. the TV is also set @ fullscreen from it's menu. the MacBook is set @ max native resolution 1280 x 800, millions of colors.
i got 2 cables from CompUSA($15.00/ea.) less than 1/2 the original list price. probably because there are no more 12" P'Books & they think they have no market for them & want to get 'em out of inventory. iTV Link cable might also work for MacBook presentations using a Projector.
hope this helps someone.
DP 2.0 G5 w/ 2.5 GB RAM, 20" Cinema Display, 23" Philips HDTV Mac OS X (10.4.8) 17" FP iMac G4 w/ 512 MB RAM, MacBookC2D w/ 1GB RAM

iPod AV Cable M9765G/A

IPhone 32 GB 3GS TV output with Monster iTV Link

I have used my Monster iTV Link cable http://www.monstercable.com/productdisplay.asp?pin=3897 to connect my 80GB 5th generation ipod (through the dock port on the bottom) to my Chevy Avalance's AUX Video input via left, right audio and video plug. When using my old ipod and selecting a video it will automatically ask for "TV out" on or off. I switch it to "TV on" and my ipod plays through the cable into my AUX Video input with great video and audio quality in my vehicle. I tried the exact same thing using my new iphone 32GB 3GS and nothing happens. It does not ask to select "TV on" It plays through the iPhone speakers as if it wasn't connected to anything.
When using the mini jack input from my 5th generation iPod and my new iPhone 3GS into the vehicle AUX audio jack input the result is the same. Both play through the vehicle speakers. However, the mini jack audio quality is noticeably inferior to the dock port on the bottom of the devices.
Why don't both play through the AUX video input?
I tried changing the settings in my iPhone (NTSC & PAL) with no luck?
The website for Monster says the cable is for "iPod Video" is it possible the cable is not iPhone compatible?
How do I get my new iPhone to play through the bottom dock port to my left right audio, video, input?

Older video cables are not compatible with the iPhone. The Apple A/V cables are:
<http://store.apple.com/us/product/MB129LL/B> Composite video
<http://store.apple.com/us/product/MB128LL/B> Component video

IPhone TV out w/ iTV Link Monster Cable

Purchased the Monster Cable iTV Link, how do I set my iPhone to use this for watching my movies on my TV? I cannot find any info in the user manual. Please help.

Yes, that is what you need (they also sell a similar, component out cable. I have both of them and they work great).
If you feel like spending another $50 (g) you might want to consider the universal dock as well:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=5B5 90630&fnode=standard/home/shopipod/ipod_accessories/cablesdocks&nplm=MB125G/A
When you plug in the composite video cable to this and then dock your iPhone you can control the playback via the supplied remote. It only does stop/start and FF FB, but it's still very handy for controlling what you see from across the room. It's also easier to simply dock the phone rather than try and connect the composite cable to it.
I bought two of them to pair with my composite and component cables, and it's very very cool to watch videos from your phone on a large TV (I have one connected to a 38" TV and the picture is every bit as good as DVD). The slideshow also works, along with YouTube (but nothing else, so don't think you can simply view Safari through this).

Monster iTV Link for 13-inch MacBook and 12-inch PowerBook

Does anyone knows or the Monster iTV Link for 13-inch MacBook and 12-inch PowerBook even work with the imac intel-based mini-dvi port?
hp Windows XP

I went with the crucial 512 SSD. It will push your budget just a tiny bit more as with tax and shipping it came to about $834 but oh man what a difference this makes! My MBP sprang to life with this SDD... Everything simply pops open instantly.
www.crucial.com
On transferring, I suggest the following:
Get a copy of SuperDuper
Buy an external case for your internal drive.
Install SuperDuper on your current HD (before swapping)
Perform the HD/SSD swap, so your SSD is in the MBP, your HD is now in the external case.
Plug in the external HD and power up holding down option. You should be presented with a choice of boot drives (DVD and your external). Boot off your external. Once OS is loaded, use Disk Utility to format and initialize your SSD. BECAREFUL that you initialize the SSD and NOT the external HD!!!
Now run SuperDuper, clone from the external to the internal SSD. It might take an hour or so to do this. When complete. Power down, disconnect the external and reboot. If you've done everything right your computer should come up on the SSD but basically will look exactly like your old drive.
You're good to go. Use it a few days and make sure everything is good, then you can format your external and use it for general purpose storage!
I'm not sure this will work on the 13" but these guys: www.mcetech.com make a bracket that you can remove your internal DVD and install your old HD inside. This way you have your SSD + your old HD installed at all times. You move your DVD to an external case. I did this in my MBP 15 so now I have basically a 1 TB laptop. My main drive is the SSD but for storage of stuff I don't use all the time I have the HD which is also 512gb. Pretty cool. For me I didn't use the internal DVD that much so having it in an external case was just fine.

Logical error in creating tables using db link in solaris

Hi,
While creating table using the syntax create table newtab...as select * from tab@dblink .. I am facing a problem. The newtab table created is having a structure different (from datalength point of view of varchar2 and char datatypes) from the source. The data length is getting tripled i.e. if a column a is varchar2(20) in tab then it is becoming --- a varchar2(60) in newtab. This is happening in solaris environment when the two databases are in 2 different servers. Please let me know if there are any patches to resolve the problem.
Thanks
Arnab

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

Issue using data link in XML Publisher

Dear All,
I am new to XML Publisher, for the first time trying data link concept in XML Publisher tool. The issue is very simple, I have two queries Q1(say it fetches sales_order_number, application_name ) and Q2 (say it fetches sales_order_number , error_number, error_description). And sales_order_number is passed as input using data link to Query Q2 from query Q1 and Q2 will retrive more than one row for a given sales_order_number.
Say for a given dept_name 1001 the output will be something similiar like
Q1:
SO# | Appl.Name
1001 | 'Invoice '
Q2:
SO# | Error.# | Error Desc
1001 | 1512 | No Data Found
1001 | 1513 | Invalid Entry
1001 | 2674 | Error while inserting the record
and the query which I have used in XML template goes like this
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[select sales_order_number, application_name
                  from T1
                 where sales_order_number = :in_sales_order_num]]>
</sqlStatement>
<sqlStatement name="LINES">
<![CDATA[
select sales_order_number , error_number, error_description
from T2]]>
</sqlStatement>
<link name="Dummy_LINK" parentQuery="Q1" parentColumn="sales_order_number" childQuery="Q2" childColumn="sales_order_number" condition="="/>
</dataQuery>
<daraStructure/>
And the grouping is as follows
<group name="G_Q1" source="Q1">
     <element name="sales_order_number" value="sales_order_number"/>
     <element name="application_name" value="application_name"/>
<group name="G_Q2" source="Q2">
     <element name="sales_order_number" value="sales_order_number"/>
     <element name="error_number" value="error_number"/>
     <element name="error_description" value="error_description"/>
</group>
</group>
And in the RTF template I have properly used <?for-each:G_Q1?> <?for-each:G_Q2?>- --
<?end for-each?><?end for-each?>
Ideally the header (Q1) should have one row and the lines (Q2) should have 3 rows. But the issue here is even Q1 produces 3 rows.
If in case Q2 has 4 records, then Q1 also plots 4 records in the report output. Hope I am explaining the issue correctly. Any help to resolve the issue would be a great. Thanks in advance.
Regards,
Antony.

try like this
<?if: (TYPE='A') or (TYPE= 'B')?><TABLE STRUCTURE><?end if?>
or
<?if:contains('A~B', TYPE )?><TABLE STRUCTURE> <?end if?>

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Open Page in new window using action link

How do I open a page in a new window, using action link ?
If I put javascript window.open in OnClick event, the action event ins�t called.

Hi,
The window.open method can be used with the hyperlink component. So please try it with a hyperlink component.
Cheers
Giri :-)
Creator Team

Using web link to call the report by passing the parameter but report blank

Hi,
I have using web link to prompt to generate the report(Quotation Format) by passing SR number in Service Request object.
The result return is blank report, the URL link that i put in as below :-
https://secure-ausomxega.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Options=rfd&Path=/shared/Company_AEGA-3V6GLL_Shared_Folder/SR%20Quotation&Action=Navigate&P0=1&P1=eq&P2="Service Request"."SR Num"&P3=%%%SR_Number%%%
If preview in report folder, the report is generated with the output.
Is my syntax having problem or the method cannot be done this way?
Please advise

Hi Alex,
I manage to get the report output but the result is always same.
i have checked the filter, the filter is calling the SR number.
When i try to output to PDF an error prompt :-
Sax parser returned an exception. Message: Expected entity name for reference, Entity publicId: , Entity systemId: , Line number: 335, Column number: 12
Error Details
Error Codes: UH6MBRBC
Thanks
SK

Using text links to open accordion panel

How do I use text links (from the page's main menu) to
programatically open a particular panel.
here is the page:
http://debrankin.com/tee/SITEDESIGN/
for example: I want to click on "Resumes and Cover Letters"
in the left hand menu to open the first accordion panel (by the
same name). I have this set this page so that all panels are closed
initially.
i know i'm missing something because this obviously does not
work: i've looked for documentation and this issue is inadequately
addressed!

twinflame wrote:
> i know i'm missing something because this obviously does
not work: i've looked
> for documentation and this issue is inadequately
addressed!
Not really. The problem is that you have attempted to create
a
JavaScript object called accordion1 before the accordion HTML
is even
loaded into the browser. Moreover, the script that
initializes the
accordion is already in your HTML where it should be (after
the
accordion), but it uses Accordion1, not accordion1
(JavaScript is
case-sensitive.
Remove this after your menu.
> <script type="text/javascript">
> var accordion1 = new
Spry.Widget.Accordion("Accordion1");
> </script>
Change the links in the menu to Accordion1.openPanel(0),
etc., and it
should work.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

Using iTV Link

Similar Messages

Maybe you are looking for