Using Japanese Crop Marks

I just downloaded the japanese crop marks from Indesign Secrets, saved them in the folder "C:\Program Files\Common Files\Adobe\PrintSpt" I've been using those files since CS3 but for some reason it is no longer working for CS6? Can anyone confirm this?

Thanks for your replies, I have ran the update on my illustrator and am now running 16.0.4 (as shown in screen shot) but still do not have this option.
Are you running English CS6 or ME version? We use ME version but Japanese trims were available in CS4 and 5 ME I am just confussed as to why they would take this option away from just the ME version. I have a English copy so I am going to run an update on that and see if I get a different result.

Similar Messages

Japanese Crop Marks illustrator CS6

The setting to 'use japanese cropmarks' has been removed from the general settings in illustrator CS6. Any suggestions as to how I can get these back? I want them on my artwork not added at print. I have an Action to add them to my cutter profiles in CS4 and CS5 but this no longer works in 6 as the Japanese Crop Mark setting has been removed. I therefore only get corner trims and not center marks.

Thanks for your replies, I have ran the update on my illustrator and am now running 16.0.4 (as shown in screen shot) but still do not have this option.
Are you running English CS6 or ME version? We use ME version but Japanese trims were available in CS4 and 5 ME I am just confussed as to why they would take this option away from just the ME version. I have a English copy so I am going to run an update on that and see if I get a different result.

How to add Japanese crop marks to Indesign?

Upon exporting files, there is a dropdown menu that says "Type," but there is only default. How do I add Japanese cropmarks (I think they are called Tombo.mrk) to indesign?

It's an older article, but there is a download for them on this page:
http://indesignsecrets.com/japanese-and-chinese-crop-marks-for-indesign.php
Mike

CS5 Crop marks don't work in Save For Web

I'm playing in the trial version of Illustrator 5.
I'm having trouble figuring out the crop marks. I select an object and try the various versions of creating crop marks. But when I Save For Web, it does not use the crop marks as a guide to trim the artwork down. The crop marks are visible.
In CS3, which I've used for years, I would create an object and use the crop mark tool to create the marks at the size of my object. When I would Save For Web it would save the file to the exact size of my crop marks, no matter if I had artwork in clipping masks that go outside the crops.
Why does this not work in CS5?

You do speak the truth so in CS 4 and now Cs 5 you instead of drawing a rectangle and the making it into crop marks you simply draw an artboard then when you export you select to use artboards in the export dialog and select the artboard you just made and voilá.
Now before you go crazy this is an advance you can also choose to export all the artboards a range of artboards or a non-contiguous selection of artboards this way.
the difference here is that you draw the artborad which is actually drawing a rectangle and making the crop marks as in the CS 3 all in one opertation
it is really the same feature with lots of features added to it. Including the ability to name the art boards (cropped areas) number them reorder them
manage them in the artboard panel and then the team went farther than that with pasting in place pasting an element on all the artboards at once.
It is really just the crop area feature but with lots of possibilities.
If you need t draw an artboard within another artboard hold down the shift key.

How do I change the alignment of crop marks?

When exporting a document as a PDF the crop marks are automatically aligned with the edge of the document, but I need to move them a couple of millimetres in to account for the bleed.
I can't find any options where I can change this. The only option I can see is 'offset' but that just varies the actual distance of the crop marks from the document.
I'm sure it's something really obvious but I'm going nuts here. Any help would be great. Thanks.

Why not make the document the cut size and set the bleed in the document? That's out of box and standard.
Alternately you can use the Crop Marks script found in the Scripts panel and make boxes in your document's cut size, crop marks based on their bounds.

Crop Marks don't appear in pdf (Illustrator CS4)

Hi everyone,
I've used the crop marks command (under the effects menu) on a rectangle that is the size of the artboard. I then created a pdf of the document and made sure there was enough bleed to encompass these crop marks, ie. 20mm all round. When I open up the pdf though no crop marks appear.
Can someone tell me why this is happening?
Appreciate any help.

It does do that but it should not show the bleeds as a part of the document it should the document size should be differentiated from the bleed and crop and printer marks area.
You should be able to turn them off for better review purpose with clients and the thing that Acrobat does automatically is to fit the document to the paper size. This I think is a mistake as the ordinary user might not understand what is happening.
If you want to print the document at a 100% it has to go on a paper and to a print that prints documents of a larger size.
It should be clearer as we have reach a point in time where there are most users who have no old world experience with the printing press and plate making so many will not get this true once pointed out it will appear to them as a no brainer.
Also with Acrobat becoming a presentation and conferencing tool for client review in a very live way the ability to turn the bleeds and marks off with a click is very necessary especially hen you have a dead head executive on the other end saying that they never approved that design feature. You can then just click hide the crops or pint out that those marks are outside the documents page size and won't print.
No matter how much sense it makes to you and me because we are very experience with this there will always be people outside our profession that will have a hard time with this and many within our profession as well.
I was aware this was finally included in CS4 but I think it can be improved admittedly you can send a copy of the pdf without bleeds and marks. But you have no control over what they might do on the other side and i have seen some pretty stupid things.
In th old days you know the account exec would come into the art dept and pick the comp off of your drawing table and take his finger and run it over the art and ask is this wet?
I guess I don't have to tell anyone the answer to that question.

Western Crop Marks in FrameMaker 8

When creating a PDF from FrameMaker 8 using Western Crop Marks, the text above the crop marks is in symbol font. How do we change the font used for that text?
Thank you.

Let me reinforce part of what J Maloney has said:
Never, EVER, allow a printer/publisher to skip the paper proof for something that's going to be mass produced.
NEVER.
They WILL screw it up.
-Noel

Crop Marks have changed since CS

Hi all,
I am coming from the stone age (Illustrator CS) and the use of crop marks in CS5.5 is tripping me up. I used to be able to drag a box around some art, change the box to crop marks and export to a .jpg that would be cropped to those marks. Now it seems that creating crop or trim marks don't work that way any more. What am I doing wrong? Thanks.

Yes, it now provides multiple artboards. Harken:
• You've got an artboard with art on it
• As in previous versions, you draw a rectangle above the part you're going to export
• While this rectangle is selected, go to Object > Artboards > Convert to artboard.
• Make sure that this new artboard is the current artboard, go to File > Export and export as a .jpg using the Use artboard option in the Export dialog
If you're going to export through the Save for Web dialog, then make sure to turn on the Use artboard option that is available somewhere in that dialog.

InDesign crop marks HELP??

Hey guys!
So I'm designing a booklet and I need to put crop marks on it. The problem is, when I set the marks they appear not only at the right places but also BETWEEN the facing pages. How can I set them to appear only on the sides and not where the binding of the booklet would be later?
Thanks!

Are you making manual crop marks, or maybe using the crop marks script? If so, do you really need them to be manual? You can generate crop marks in the PDF export phase. That's how most people would do it.

CROP MARK color problem

Hi all
I've got a problem in crop marks; while distilling the ps file it generates log file as crop mark is in cmyk. I've used indesign crop mark option while generate PS file. Pls help on this issue.
thanks in advance

Crop marks should use CMYK and any other colour like spot colours when making a full colour document for print.
Printing is CMYK so the colour of each crop mark has to be in CMYK to be seen on every printing plate. This helps the printers print each colour on top of each other, called registration.
Usually the crop marks created using the REGISTRATION colour in Indesign, which will use all the colours you have used in your document, including Cyan Magenta Yellow and Black and any other colour you have used in the document.
Have you got colour images anywhere in the document?

Test: Using Crop marks in indesign CS4 with Epson 3800 Mac 10.5.7

Jun 19, 2009 9:35 PM
Crop marks using indesign CS4 with Epson 3800 Mac 10.5.7
My crop marks and pages are printing larger than my document sizes. My paper size is 13x19, so I should have crop marks at the exact corners of the page sizes. But indesign is printing the entire document larger. So my document which is 11x14.75 is now printing 11.25x15.5. All my settings are correct. So, is anyone else using an Epson 3800 with CS4 indesign having issues such as the above? And can I ask (beg) a few of you to do a test print with crop marks and let me know the results?
My workflow has been completely stalled because I can't get my pages to print the right sizes with the crop marks at the right measurements. I'm printing a photo portfolio on the Lumijet double sided paper and "when" it did work awhile back sometime several months ago, the finals looked great. I've already reinstalled both the Epson 3800 driver and the Indesign CS4 software, but the results are still the same.
So, here are my settings:
document size: 11x14.75
in the print panel:
Printer: Epson 3800
Setup: Paper size: Super A3/B13x19, scale 100% width & height, page position Centered
Marks & Bleed: Marks: "Crop Marks" checked. offset: 0, weight: .25, Bleed and Slug: Use Document bleed settings, include slug area. The bleed is 0 for top, bottom, left and right
Color Management: Document profile: Adobe RGB, Options: Indesign handles colors, Printer Profile: (A custom made profile using Xrite for the 3800 with Lumijet paper)
The settings on the Epson 3800
Epson 3800 Printer
Presets (set for the profile mentioned above)
No Color management
Sometimes, on a whim, the printer and indesign cooperate together like good little children should. But not often. And I can not conclude why they are nice to each other sometimes, but given the same detailed data at other times, they fight.
If anyone could run through a similar process using indesign with a photo layout and setting up the printer settings for both the Epson 3800 and in the indesign program and let me know their results, I would value your conclusions very much. You don't even have to waste paper or ink. Finally, after wasting so many pages of paper and of ink. I deleted the photos from the page, and printed it blank with only the crop marks for me to measure if it was coming out right or not.
Thank you for any response. And feel free to call me if you want to vent about Epson 3800's or about Indesign CS4 anytime! I'm up late.... 646 256 8853.
Thaddeus

I specified the paper size as strictly 13x19, no boarderless, no retain size. Same problem. I also did as you suggested below. The pdf document does remain true to the document. As a pdf doc. I changed the color mgmt to Adobe rgb 1998. It looks okay, but not as lively as I get when printing correctly with my color mgmt working and in sync.
Your final question about simply using photoshop. Well... I might go back to it and give up on Indesign if this is the case that it won't simply crop my documents to the sizes that I input them to be cropped as. But, I am using Indesign so that I can create a page layout that I can't do in Photoshop. My folio is about 25 or more pages with double page spreads. I am printing on a two-sided Lumijet paper and my folio was custom designed to be cut out at 11x14.75. If and when it is printed correctly, I am printing on both sides of the paper and trimming it to exact size.
It sounds as if you have exhausted the potential problems and don't have a clear explanation for why the doc isn't printing correctly in Indesign either with the color mgmt. or the document sizes. I'll try one more print using a different color profile similar enough to get at minimum, an okay print. If it doesn't print at least okay, then it isn't most likely my profile..... Okay done. Crazy. The color is inaccurate, but for some reason or another, the document size printed correctly. It measured exactly 11x14.75. What I have done during this period of time is:
First) I did as you suggested and turned the Print to Adobe PDF 9 and created a print there. I measured it and it did measure correctly. I didn't love the color, but... at least it is measuring correctly.
Second) I turned the Printer back to Epson 3800 (I'm beginning to think that this simple gesture was what caused the printer to print correctly) I didn't change any settings, but I did make sure that they were set correctly as before. The paper size was set to 13x19. When I make sure this setting is right in the "printer" dialogue for the Epson 3800, and then switch back to ID, the printer dialogue in Id changes to "Define by Printer." But I changed nothing, other than the profile to an older one that I used before. The color is still inaccurate, but at least for two prints just now back to back, the measurements were correct. What to do? Lol.
Thanks again for all of your time spent trying to resolve this issue.
Sincerely,
Thaddeus

Crop marks using indesign CS4 with Epson 3800 Mac 10.5.7

My crop marks and pages are printing larger than my document sizes. My paper size is 13x19, so I should have crop marks at the exact corners of the page sizes. But indesign is printing the entire document larger. So my document which is 11x14.75 is now printing 11.25x15.5. All my settings are correct. So, is anyone else using an Epson 3800 with CS4 indesign having issues such as the above? And can I ask (beg) a few of you to do a test print with crop marks and let me know the results?
My workflow has been completely stalled because I can't get my pages to print the right sizes with the crop marks at the right measurements. I'm printing a photo portfolio on the Lumijet double sided paper and "when" it did work awhile back sometime several months ago, the finals looked great. I've already reinstalled both the Epson 3800 driver and the Indesign CS4 software, but the results are still the same.
So, here are my settings:
document size: 11x14.75
in the print panel:
Printer: Epson 3800
Setup: Paper size: Super A3/B13x19, scale 100% width & height, page position Centered
Marks & Bleed: Marks: "Crop Marks" checked. offset: 0, weight: .25, Bleed and Slug: Use Document bleed settings, include slug area. The bleed is 0 for top, bottom, left and right
Color Management: Document profile: Adobe RGB, Options: Indesign handles colors, Printer Profile: (A custom made profile using Xrite for the 3800 with Lumijet paper)
The settings on the Epson 3800
Epson 3800 Printer
Presets (set for the profile mentioned above)
No Color management
Sometimes, on a whim, the printer and indesign cooperate together like good little children should. But not often. And I can not conclude why they are nice to each other sometimes, but given the same detailed data at other times, they fight.
If anyone could run through a similar process using indesign with a photo layout and setting up the printer settings for both the Epson 3800 and in the indesign program and let me know their results, I would value your conclusions very much. You don't even have to waste paper or ink. Finally, after wasting so many pages of paper and of ink. I deleted the photos from the page, and printed it blank with only the crop marks for me to measure if it was coming out right or not.
Thank you for any response. And feel free to call me if you want to vent about Epson 3800's or about Indesign CS4 anytime! I'm up late.... 646 256 8853.
Thaddeus

You need the InDesign forum.

PDF : Crop to the crop marks using Acrobat 7

Hi
at the moment, i remember the sizes of the top,bottom,left, right margins to crop PDF to required printing size
before i save it as PDF again using Acrobat 7 crop tool. I was wondering, is there a auto detection of the crop marks feature in Acrobat.
it will save me abit of time if i can avoid type the margins or having to deal different page sizes.
thanks.
Jo

Hi terenceg40046976,
There is no need to worry as the lock symbol on the file icon indicates that the PDF files are secured.
You might refer the below mentioned link to remove security from your PDF:
http://blogs.adobe.com/acrobatforlifesciences/2010/04/removing_security_from_pdfs_in/
Let me know if this helps.
Regards,
Anubha

Acrobat DC edit object tool, in previous versions used this to delete objects as crop marks

Now in Acrobat DC I can't select crop marks as a whole

Hi colobaron1,
Could you please specify what exactly do you mean by saying 'select crop marks as a whole'.
Please elaborate more on the same.
regards,
Anubha

Error in creating PO using Japanese language in ECC 6.0

Hi guys,
We are encountering an error (BP762) in creating PO when using Japanese log on language...
Why is that? Thanks!

Hi Mark
Sorry for missing the link Here is the information in the link.
Windows->Settings>Control Panel>Regional and Language Option>Language Tick both the checkboxes over there.
SAP->Customizing of local layout[nothing but last button of the toolbar at sap screen->Option--->I18N (Activate Multibyte Function Support)
And then try to logon in SAP and use your transaction.
Thanks
Sudharshan

Using Japanese Crop Marks

Similar Messages

Maybe you are looking for