Using JMF with two audio cards

Hello,
Is it possible to use two audio cards and have JMF address them independently. I'd like to be able to reference one for recording audio and the other for audio playback (simultaneously).
Thanks,
Ben

It's definately possible, but you may have to interface with JavaSound to do it.
Theoretically, you should just be able to do javasound://0 for one, and javasound://1 for the other. No guarentees, though. You might have to wrap around JavaSound directly to get that level of control.

Similar Messages

How can i pay on the apple store online with two credit cards, with two different billing addresses

I will be greatful if you could answer me this question...
How can i pay on the apple store online with two credit cards, with two different billing addresses?
I know that you can use two credit cards to pay an item but the problem is that i can only put the billing address of just one of the credit cards, and since the two cards are from different people (my parents) i can't do it. They live in the same place so i don't know if i should just put one of the billing address.
Thank you.
PS. I don't know if this is the right community to ask this, sorry if i'm wrong.

On the Apple Store "Payment & Pricing" page it states:
Using more than one payment card
You can also combine payment methods to pay for your purchase. Choose from the following combinations of credit cards and Apple Gift Cards:
Credit card(s) - up to two
Apple Gift Card(s) - up to eight
Apple Gift Card(s) + one credit card
During checkout, if you are paying with a gift card issued by a credit card company, you can combine it with one credit card.

Using JMF with JBuilder

I was trying to use JMF with JBuilder 2005 but didnt know how to configure the libraries. I asked many people but no one could help me. I just found a web site about this problem so i would like to share it with those who are facing the same problem. hope it will help.
check http://www.computer-logic.net/javafaq/JFAQ_MediaFiles.htm

put the two jar files,jdom jar and xerces.jar files into the resourec in jbuilder.sorry if i am not clear in the answer.
cheers

Problem with xvid videos with two audio streams

/ Hi,
recently I purchased a Creative Zen X-FI2, it is working perfectly, but I only have one problem, I have some videos xvid with two audio streams (mpga), on VLC I can select either of the two audio streams but I haven't found if I can select the audio stream on the Zen player.
Does anyone knows how to select among different audio streams on a video?

The X-Fi2 doesn't have such an option.
If you still want to be able to watch the video with the second audio stream, I think the only possibility is to re-encode it using the second audiostream (or disable the first).

QT H.264 files with two audio tracks. Quicktime plays 2nd track first. ***?

I've been experimenting with H.264 (AVC) and my DVDs. Using Handbrake, I ripped a DVD to MP4 (H.264) and including the director's commentary as the second track.
When I play the MP4 with Quicktime Player, it plays the director's commentary instead of the main soundtrack. VLC, however, correctly plays the first track (main movie audio track) and it allows me to select the second track via a menu.
To get Quicktime to play the proper track, I have to open "Movie Properties" and manually uncheck the second track. This was never a problem with DivX/XviD encoded files with two audio tracks; Quicktime Player correctly played the first track.
Why does Quicktime ignore the first audio track in MP4s (but not AVIs) and is there a way to correct this?

I do have QT Pro.
H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

Server 2003 with two network cards problems

We have a win server 2003 with two network cards. From the server we connect using a vpn client from cisco to another server. When we do that we can NOT RDC to our server because it inherits the remote IP from the vpn connection. We installed an additional NIC. We gave an static IP to connect to our local network. How can we or is there a way to tell the vpn client to use one nic card and leave the other so we can RDC to it? thanks

It is possible to configure server to use on nic for incoming and other for outgoing, but it is not possible when vpn client is running. Also it cannot be specified as to which card to use.

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

MAC OS 10.7.4 3.2GHz Quad-Core Intel Xeon processors, 12GB of 800MHz DDR2 and 2 ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports) . The problem is, I woul like to use one output as main and the three others as secondary or extended desktop but the system don't allow me use two diferent video cards this way.

HT2589 Someone is using itunes with my credit card without permission and I want my card number removed. Ive been trying to get this fixed for months. Im at the end of my paitience.

Someone is using iturnes with my credit card without my permission and I want my credit card number removed. I've been trying to get this matter resolved for months. I've lost all patients with this matter. I want my credit card number removed from your business.
Virginia Mezger
<Personal Information Edited by Host>

Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are we your fellow users.
Since you don't say what resources and methods you've been attempting to get this matter resolved, it's difficult to offer suggestions. But if your credit card has been used without your permission, your primary recourse should be to your credit card company to report the unauthorized charges and have them issue you a new credit card. If your card has been compromised such as to make unauthorized charges on the iTunes Store, it's highly probably that it can be used elsewhere.
As to removing the card number from your iTunes Store account, see:
http://support.apple.com/kb/HT1918
You should be able to change or remove the card information there. If not, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store, if you have not done so already. If you have, please post back with a summary of what they told you and perhaps someone can offer additional suggestions as to how to proceed.
Regards.
Regards.

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

Can I unlock my Droid Charge and use it with a sim card in India?

How can I unlock my Droid Charge and use it with a sim card in India?

You just have to call VZW Global TS and as long as you meet all of the requirments you will be able to unlock your phone.
Must be a Verizon Wireless customer.
The device being unlocked must be active on a VZW line of service.
The line of service must be active for at least 60 days.
For converted accounts from acquisitions or mergers (i.e. Alltel, Unicel/RCC, etc.), the line of service must be active in the VZW billing system for 60 days from the conversion date.
The line of service must be in good standing for the past 60 days. Good Standing is defined as:
Balance must be current
No service suspensions or hotlines in the past 60 days.
Customer may only have one 3G SIM unlock per line every 10 months.
The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with VZW.

Using iPhone with two computers

Home PC - MacBook Pro
Work PC - Windows
both running iTunes 7.7
My music is on my home Mac and I manually create playlists, add music etc.
With my 3G Nano, I can connect and listen to songs on my iPod from my work PC. I can't seem to do this with my iPhone - my PC sees the iPhone but all of the music is greyed out and cannot be selected.
Is it a limitation of the iPhone that I cannot use it with two computers in this way, or is it a configuration issue?
I would prefer not to have to buy a set of external speakers just to use my iPhone to play music at work.
thanks
Shane

Actually, there are several articles on the web about the fact that you CAN
synch the itunes with two computers. Music, Video, and Ringtones can be done from one computer, and Mail, Contacts, etc. can be done from a second computer.
Just do a Yahoo search on "synching iPhone with two computers."
If you are trying to do music from two computers, you are right, that will not work. There is a program, which I think the Yahoo search above will also uncover that allows you to do a "swap," where you can have the songs from one computer show up on the iPhone, and when you swap, the songs from the other computer show up. I am not sure if this utility survived the upgrage to version 2.0 of the softweare.
cheers,
Ray

My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?

My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?

Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

Why video with two audio tracks imports like one track (main)?

Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
- I make video with two audio tracks (screencast with system sounds and microphone, separated)
- Import it to Premiere CC and see only one audio track, system sounds!
- What should I do to see both of them?
- Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?

Great first post!
Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
Channel Map the Audio to do what you want it to do with t e source clip.
Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?
You could have read the Premiere Manual or watched the Adobe TV Tutorials or gone to edit school instead ...

Using Berkeley With Two Different Environment Simultaneously

I am trying to use Berkeley with two different environment simultaneously in one program. But I am getting an error message of Databases left open. The first environment close with no error but the 2nd environment, having an error like this,
Exception in thread "main" java.lang.IllegalStateException: Unclosed Database: element_primary_key_index\\192.168.150.211\glassfish3\Berkeley\environment\Testing11
Unclosed Database: class_catalog\\192.168.150.211\glassfish3\Berkeley\environment\Testing11
Unclosed Database: element_database\\192.168.150.211\glassfish3\Berkeley\environment\Testing11
Databases left open: 3
     at com.sleepycat.je.Environment.close(Environment.java:383)
     at com.svi.tools.gfs3v10domain.database.GFS3v10ReadWriteDatabase.closeUpload(GFS3v10ReadWriteDatabase.java:155)
     at com.svi.tools.gfs3v10domain.GFS3v10Domain.closeReadWrite(GFS3v10Domain.java:160)
     at com.svi.tools.gfs3v10.util.GFS3v10UploadUtil.closeUpload(GFS3v10UploadUtil.java:97)
     at com.svi.tools.gfs3v10.GFS3v10.closeUpload(GFS3v10.java:115)
     at com.svi.tools.gfs3v10uploader.util.Uploader.uploadFiles(Uploader.java:89)
     at com.svi.tools.gfs3v10uploader.GFS3v10Uploader.mainMethod(GFS3v10Uploader.java:109)
     at com.svi.tools.gfs3v10uploader.GFS3v10Uploader.main(GFS3v10Uploader.java:52)
Please someone help me with my problem. Thanks in advance.

Hi Mark,
Here is my sample program for the problem:
import java.io.File;
import com.sleepycat.bind.serial.StoredClassCatalog;
import com.sleepycat.je.Database;
import com.sleepycat.je.DatabaseConfig;
import com.sleepycat.je.Environment;
import com.sleepycat.je.EnvironmentConfig;
import com.sleepycat.je.EnvironmentLockedException;
import com.sleepycat.je.SecondaryConfig;
import com.svi.tools.gfs3v10domain.objects.GFS3v10DomainElementData;
import com.svi.tools.gfs3v10domain.objects.GFS3v10DomainElementKey;
import com.svi.tools.gfs3v10domain.views.utils.ElementByPrimaryKeyCreator;
* Read Write Database used for every thing else.
public class MethodsSample implements GFS3v10Database {
     * Environment where the Database resides.
     private Environment environment = null;
     private boolean isClose = false;
     String environmentString;
     * Class Catalog for Stored Classes.
     private static StoredClassCatalog classCatalog;
     * Element Database.
     private static Database elementDatabase;
     * Element Database by Primary Key.
     private static Database elementByPrimaryKeyDatabase;
     private static Database catalogDatabase;
     * Default Constructor.
     public MethodsSample() {
* Alternate Constructor.
* @param homeDirectory Location where the Database is Located.
public MethodsSample(String homeDirectory) {
     environmentString = homeDirectory;
     openEnvironment(homeDirectory);
     openDatabase();
@Override
     * Opens the Read Write Database.
     * @param homeDirectory Location where the Database is Located.
public void openEnvironment(String homeDirectory) {
     EnvironmentConfig environmentConfig = new EnvironmentConfig();
environmentConfig.setTransactional(true);
environmentConfig.setAllowCreate(true);
environmentConfig.setDurability(DURABILITY);
while (environment == null) {
     try {
          environment = new Environment(new File(homeDirectory), environmentConfig);
     } catch(EnvironmentLockedException ele) {
          try {
                         Thread.sleep(500);
                    } catch (InterruptedException e) {
@Override
     * Opens the Database.
public void openDatabase() {
     DatabaseConfig databaseConfig = new DatabaseConfig();
     databaseConfig.setDeferredWrite(true);
databaseConfig.setAllowCreate(true);
catalogDatabase = environment.openDatabase(null, CLASS_CATALOG + environmentString, databaseConfig);
classCatalog = new StoredClassCatalog(catalogDatabase);
elementDatabase = environment.openDatabase(null, ELEMENT_DATABASE + environmentString, databaseConfig);
SecondaryConfig secondaryConfig = new SecondaryConfig();
secondaryConfig.setDeferredWrite(true);
secondaryConfig.setAllowCreate(true);
secondaryConfig.setSortedDuplicates(true);
secondaryConfig.setKeyCreator(new ElementByPrimaryKeyCreator(classCatalog, GFS3v10DomainElementKey.class, GFS3v10DomainElementData.class, String.class));
elementByPrimaryKeyDatabase = environment.openSecondaryDatabase(null, ELEMENT_PRIMARY_KEY_INDEX + environmentString, elementDatabase, secondaryConfig);
@Override
     * Gets the Environment.
     * @return Environment.
public Environment getEnvironment() {
     return environment;
@Override
     * Gets the Class Catalog.
     * @return Class Catalog.
public StoredClassCatalog getClassCatalog() {
     return classCatalog;
@Override
     * Gets Element Database.
     * @return Element Database.
public Database getElementDatabase() {
     return elementDatabase;
@Override
     * Gets Element By Primary Key Database.
     * @return Element By Primary Key Database.
public Database getElementByPrimaryKeyDatabase() {
     return elementByPrimaryKeyDatabase;
@Override
     * Closes Database and then Environment.
public void closeUpload() {
     System.out.println("1st Jar environment closing = " + environmentString);
     elementByPrimaryKeyDatabase.close();
     elementDatabase.close();
     classCatalog.close();
     catalogDatabase.close();
     environment.close();
     isClose = true;
public Boolean isClose() {
     return isClose;
     @Override
     public void closeOthers() {
for the Main:
public class sample {
     public static void main(String[] args) {
          String environment1 = "\\\\192.168.160.184\\glassfish\\berkeley\\environment\\home\\Multiple\\Testing11";
          String environment2 = "\\\\192.168.150.211\\glassfish3\\Berkeley\\environment\\Testing11";
          openCloseEnvironment(environment1, environment2);
     public static void openCloseEnvironment(String environment1, String environment2) {
          MethodsSample forEnvironment1 = new MethodsSample(environment1); //Opens the Databases
          MethodsSample forEnvironment2 = new MethodsSample(environment2); //Opens the Databases
          forEnvironment1.closeUpload();
          forEnvironment2.closeUpload();
// same error happens no matter what sequence for closing
Thank you.

TS1292 Hi I was gifted with two iTunes cards for christmas but I can't use them. They can only be used in the American store and I am Canadian with a Canadian account. What an I do?

I am canadian and was given two gift cards for Christmas but cant use them. I get the message that they must be in the american store
Help

Correct. Gift cards can only be purchased and redeemed in the country of origin. Given that it's the holidays you might consider gifting them to a needy child in your church.

Using JMF with two audio cards

Similar Messages

Maybe you are looking for