Using Keynote with Podcast Capture and Dual Screens

Hi everyone,
We are trying to use a dual screen setup to record some Keynote presentations using Podcast Capture (i.e Dual mode, with the Keynote presentation in one screen and the presenter in the other).
The problem we are having is that when in full screen mode, Keynote takes control of both displays, thus stopping the Podcast application from being displayed. Even if we switch off the Presenter Display on the second screen, the second screen turns black.
I know we can start and stop recording with hotkeys, but we would prefer to be able to see the Capture app in one window with the presentation full screen in the other.
Perhaps this is just an oversight on Apple's part, but I'm finding it hard to believe its not possible. If anyone else has a workaround then please share.
Thanks.

Other applications are not visible when Keynote is playing back.  Keynote takes over control of the graphics system when playing back presentations to enable Keynote to display properly.
When I play back Keynote and I want to look at a second application, I use a second Mac.

Similar Messages

  • I'd like to see next generation of Touchsmart PC with Touchsmart keyboard and dual screen

    Where you have a monitor as the display and a seperate keyboard, but the keyboard is another monitor which operates as a keyboard, for example something like this... 
    This ultimately would mean that the keyboard could be application driven, that is it could be specifically configured anyway that the application requires it.  I'd also like to see a dual screen option for touchsmart PC - a screen that is built in and can be slid out from the rear of the monitor to act as dual screen, extended screen...
    HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

    Jim,
    You may want to check out this community for developers. I'm pretty sure HP is aware of the goings-on in these forums:
    http://www.touchsmartcommunity.com/forums
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Which  kind of FireWire Camera do you use with Podcast Capture software?

    Hi,
    i have a little question to ask you.
    Could you tell me what kind (product/model) of FW camera you use in order to record video with
    Podcast Capture 2 ?
    we had verified that some FW cameras give problems during acquisition, in the details Podcast Podcature stops automatically the recording giving this error "QTErrorMediaChanged
    The recording has been automatically stopped because the format of the input media changed or the media samples were invalid."
    Thanks

    I've found that PC capture is a bit buggy. For me, sometimes it won't recognize the camera that's attached to the computer. I know that it's not the camera, cause if I quit PC Capture and launch quicktime, then do a video capture, it sees the camera fine. Also, it seems to be 100% reliable.
    So I use it. When you're done recording, you hit stop, then click the pulldown menu ->share->Podcast Capture
    It's an extra step or two, but it's not too complicated for the teachers at my school who have difficulty identifying when their network cables been pulled from the wall when the clue is "My Internet Doesn't Work."
    As to your question, Sony.
    Get a cheapy DV camera. One that takes a tape. If you get one that uses a hard drive or DVD media, I've found that you're asking for trouble even if you can get it to work.
    You can defeat the auto off feature on all Sony Camera's by removing the tape. For whatever reason, if you have a tape in the camera and just leave it on, it'll power off after a bit. I guess it wears down the drum or something. Take the tape out and it'll stay on indefinitely.
    Hope it helps!
    -Graham

  • Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

    Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

    It seems there's a workaround here:
    https://discussions.apple.com/thread/5566037?tstart=0

  • Using Keynote with PPT

    I use PPT with embedded videos and when i pull them into Keynote on my iPad, my videos won't play.  Any help would be appreciated

    you have to import the video files  into Keynote, use iTunes to transfer

  • I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    There is no more LiveType with Motion 5.  You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

  • How can I use LCCS with ActionScript 3 and Flash CS4?

    Hi,
    Using Stratus I was able to create an an application using Action Script 3 and Flash CS4.  The sample code on the Adobe site was quite straight forward and easy to understand.  I now want to switch over to  LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS.  Do I need to know Flex to be able to use LCCS?  Everything was quite simple and easy to understand with Stratus and makes complete sense.  But LCCS is really confusing.  Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client.  There is nothing in the  LCCS SDK that covers Flash and Action Script 3.  Please help!  I found the link below on some forum but it takes me nowhere.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

    Thanks Arun!
    Date: Thu, 29 Apr 2010 11:44:10 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
    Hi,
    Welcome to the LCCS world.
    Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a  pretty basic app, but should help you moving.
    We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
    Thanks
    Arun
    >

  • Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud.  The to do bar just shows no upcoming appointments when my calendar is filled with them.  How do I fix this

    Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments.  If has the notation that no appointments are available?  My calendar is full of appointments.  How do I correct this?

    I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution:  While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

  • I am using Firefox with OS X and suddenly I lost the slot in which I type URL's in the top of the browser. How can I get it back?

    I am using FIREFOX with OS X and suddenly I lost the slot at the top of the browswer in which to type the URL's. It just disappeared.
    How can I get it back?

    View --> Toolbars --> Navigation Toolbar

  • I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

    I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    http://support.apple.com/kb/ht4108
     Cheers, Tom

  • Integrtion Scenario using BPM with two sender and multiple receiver

    integrtion Scenario using BPM with two sender and multiple receiver
    How many Application Components are required?

    Hi Vinod,
    1) In integration repository you can have one or many software components it depends on your landscape orchestration
    2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
    also each connection between systems and bpm must have receiver determination and so on.
    Advice: Please treat BPM as a separate system.
    best,
    Wojciech

  • I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my ipad is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

    I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

    To use itunes 10.7 you need to have Snow Leopard operating system installed
    These are the system requirements
    System Requirements:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    If you can run Snow Leopard you need to purchase it
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • 10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

    10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.  I really just need mail file and desktop files recovered.

    If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
    As quickly as possible turn off the drive where deleted data.
    Use an external HDD with installed OSX for data recovery.
    Alex
    Apple Certified Support Professional

  • Problems with tethered capture and the 4.2 update

    I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

  • I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why?

    I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why? Can I reconfigure it to the IMac?

    Remove it from the Macbook first. BT devices may only be connected to one thing at a time.
    Barry

Maybe you are looking for