Using KMS for Office 2010 on Windows Server 2012R2

Hi,
We are migrating our old KMS server til 2012 R2. As far as I can find out KMS on 2012 R2 is only supported for Office 2013? Trying to install Microsoft Office 2010 Volume License Pack show "operating system not supported"
Somebody knows if Microsoft Office 2010 Volume License Pack will be supported on Windows 2012 R2?
Regards
Lars E

hi Lars again,
on the volume licensing site, we have the following Details:
Recent Changes to Volume Activation
With Volume Licensing for products such as Windows 8.1, Windows Server 2012 R2, Windows Server 2012 R2 for Embedded Systems, Windows 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Microsoft Office 2010, and Office 2013, you must use Volume
Activation (VA). To activate these products with VA, you can use either a Multiple Activation Key (MAK) or Key Management Service (KMS).
http://www.microsoft.com/licensing/activation/existing-customers/product-activation.aspx
thanks
diramoh

Similar Messages

Unable to install MS Office 2010 in Windows server 2008R2

I am trying to install MS Office 2010 in windows server 2008R2. Office installed and then immediately it rollback and installation end up with an error "microsoft office professional plus 2010 encountered an error during setup ".I tried many
things on searching net but nothing works.

Hi,
In addition to Don's post, you can refer to this kb below:
How to use a setup log to troubleshoot setup problems in Office
http://support.microsoft.com/kb/826511/en-us
I also suggest you perform the install in Windows Clean Boot mode:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Cannot install Office 2010 on Windows Server 2008 terminal server

Hello
I have a Windows 2008 terminal server which has Office 2007 Professional Plus on it. We want to upgrade it to Office 2010 Professional Plus.
Following steps from Technet, I made sure all users were out of the terminal server, then selected "Install Application on Terminal Server", then ran the setup.exe file for Office 2010.
The splash screen comes up for Office 2010 but then disappears and the install does not progress, although the setup.exe is still running in Task Manager. The "install Application on Terminal Server" window is still open, waiting for me to click
Next, Finish or Cancel and nothing else happens.
I also tried putting the server into install mode from command prompt and rebooting the server and re-attempting but no good.
How can I go about troubleshooting this issue?
Many thanks
Luke Dunster

Hi Luke,
Are you using a volume license version of Office 2010 for Remote Desktop Services/Terminal
Services? I may be wrong but I think that only this version of Office 2010 will work on a Terminal
Server. The Retail Version will just not work in this case.
I had similar problem where I tried to upgrade from Office 2007 to Office 2010 on a Terminal Server (Windows
2008) but wasn't successful with the upgrade/installation.
Also take a look at this post:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e09ee781-82c2-4399-85f4-1b90ae690ccb/office-2010-licensing-for-windows-2008-rdsterminal-services-pkc-ok?forum=winserverTS
Jale01

ADM templates for office 2003 on Windows server 2012

Hi Guys,
i am planing to upgrade from server 2003 to server 2012 but we will still be using office 2003.
Can i install office 2003 adm templates on server 2012?
Many thanks for your help
Theo

yes, the template can still be installed in the policy store or on a computer running gpmc and added in on 2012.
they will process fine
although on a side note I think office 2003 is out of support - or due to be - so you might want to look at upgrading that too in the near future.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Win7 - Using KMS Server for Office 2010 - How can you query that it's actually using KMS?

Hi All,
Our Desktop Support alerted me to an issue in which a client received a pop-up notification about activating Office within 30 days.
I started to dig into our KMS Service, having inherited it from a prior, now gone for greener pastures colleague of mine.
I see the Office 2010 key on the KMS Server and there is a corresponding DNS SRV record for the Server.
Here is that information:
Name: Microsoft Office 2010, KMSHost edition
Description: Microsoft Office 2010 KMS, VOLUME_KMS channel
Activation ID: bfe7a195-4f8f-4f0b-a622-cf13c7d16864
Application ID: 59a52881-a989-479d-af46-f275c6370663
Extended PID: 55041-00096-199-345382-03-1033-7601.0000-1222013
Installation ID: 021315815071370255435840389124010276914515863061481930
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/18/2014 10:34:28 AM
Key Management Service is enabled on this machine
    Current count: 10
    Listening on Port: 1688
    DNS publishing enabled
    KMS priority: Normal
Key Management Service cumulative requests received from clients
    Total requests received: 26175
    Failed requests received: 0
    Requests with License Status Unlicensed: 0
    Requests with License Status Licensed: 24443
    Requests with License Status Initial grace period: 1712
    Requests with License Status License expired or Hardware out of tolerance: 12
    Requests with License Status Non-genuine grace period: 0
    Requests with License Status Notification: 8
Thing is, I try querying for the KMS status on the Win7 machine and there is no entry anywhere that corresponds to Office 2010:
c:\Windows\System32>cscript slmgr.vbs -dli bfe7a195-4f8f-4f0b-a622-cf13c7d16864
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Error: product key not found.
Where can I make certain that Win7's Office 2010 is in fact using KMS for licensing? Is it in the registry?
Thank you very much for your time,
Mr Mister

Hi,
We might consider to use Volume Activation Management Tool to check the Activation Information:
Reporting Activation Information Using Volume Activation Management Tool 2.0
Or we could take a look into the application log for event ID 12288, 12289 as well as 12290. (the 12288 and 12289 should be in pairs: client query-kms response)
More information, please take a look at the below articles:
How to determine whether the KMS server is working
Windows Event Log
Hope this may help
Best regards
Michael
Michael Shao
TechNet Community Support

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

No, it is not a backup method at all. If you delete a sync'd file on any device, you delete it permanently from iCloud. That by its very essence is not a backup solution therefore. A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

KMS Host for Office 2010

AOA
I deploying windows server 2008 r2 KMS Host successfully. Now, trying to use same machine as KMS Host for Office 2010 Professional Plus. I have adopted for activation through phone. Confirmation ID from Microsoft got it. Error encountered while installing Microsoft
Office 2010 KMS Host License Pack:
"Error Code: 0x2a 0xC004F015, The software licensing service reported that license is not installed"
Tried every page GOOGLE asked but in vain,
Really stuck up and help required.
Thanks in advance.

Dear, I obtained new product key, confirmation key from MS but still no success. really at stake and guys at Microsoft are also not replying positively.
Following error is stucking my eyes and mind
C:\Windows\system32>cscript.exe slmgr.vbs /atp xxx-xxx-x-xx-x-x-x-(Confirmation
ID provided by Microsoft) bfe7a195-4f8f-4f0b-a622-cf13c7d16864
it gives following output
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0xC004F04D' to display the error text.
Error: 0xC004F04D
when run this command
C:\Windows\system32>slui.exe
0x2a 0xC004F04d
Output
is
The
software licensing service determined that the installation (IID) or the confirmation ID (CID) is invalid
Thanks in advance.

Microsoft SAM: Used software to get compliant or other option for Office 2010

I wouldn't buy used Office. Chances are someone's still using the software and figured they could make a quick few bucks. Also, while once you hold the product key and media you technically own that license, who's to say they didn't max the activation count prior to sale.
If you're intent on Office 2010, perhaps you could find some unopened Product Key Cards for purchase.

We are still kicking the can down the road with Exchange/Outlook 2010 utilizing Public Folders and a custom application that runs against them. Got hit with a SAM audit and short a few licences of Office Home and Business 2010 (Retail/FPP). As far as I am aware my only options are Volume Licensing Office 2013 and use the downgrade rights or buy used licenses of Office 2010 (Retail/FPP). My research has noted that they no longer offer Office 2010 through Office 365. Any thoughts or concerns?
This topic first appeared in the Spiceworks Community

Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise

Please help me about a issue of TMG 2010:
My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
then start it again. Check for related error messages."
and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
installed application filters and restart the service."
I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
i have try update windows and TMG latest but can not solved this issue.
i hope everyone help me as soon as. thank you so much.

HI Luis,
Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
Disable
Antivirus
Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
Try -
http://support.microsoft.com/kb/2649961
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
Ensure you have enough space for Log to be stored

Yahoo IMAP Settings for Outlook 2010 on Windows 7

Hi Guys,
I have been trying to get IMAP for Yahoo for Outlook 2010 on Windows 7 to work for a while now. I was just wondering if someone out there has gotten it to work.
Settings are Manually Configured.
Settings:
Account Type: IMAP
Incoming mail server: imap.mail.yahoo.com
Outgoing mail server: smtp.mail.yahoo.com
"Save My Password" Checkbox: Checked
Internet E-mail Settings #1:
Incoming server (IMAP): 143
Encryption Level: none
Outgoing server (SMTP): 465
Encryption Level: SSL
Server Timeout: 1 minute
Result: Continuous prompt for Username and Password when testing account settings until it fails to connect. However SMTP test email is sent.
So the only issue seems to be incoming.
Internet E-mail Settings #2:
Incoming server (IMAP): 993
Encryption Level: SSL
Outgoing server (IMAP): 465
Encryption Level: SSL
Server Timeout: 1 minute
Result: Error result is as follows "Log onto incoming mail server (IMAP): a secure connection to the server cannot be established." However SMTP test email is sent. So the only issue seems to be incoming.
I tried IMAP with gmail on 2 computers with the same environment (1 x 64bit and 1 x 32bit Windows 7 w Outlook 2010) and it seems to be fine so I dont believe it is any router/firewall issues. I have a Windows Mobile phone and it is working also. Of course most of the settings on the phone are configured automatically. If anyone could provide any suggestions, that would be great. Thanks in advance.

Hi
Thanks for sharing information. I was using same setting for Incoming but Outgoing has different settings.
I use outlook 2010 with a paid account and these settings work perfectly.
My Outgoing mail setting (While getting issue)
smtp.mail.yahoo.com
SSL: True
Port: 465
When i have above setting in my Outgoing mail i was getting error
Failed to update headers
account [email protected]
Protocol: IMAP
Server : 192.168.253.4
Port : 143
After changing from above setting to below mentioned setting i didn't get any issue while sending & receiving mail or changing folder.
Outgoing
smtp.mail.yahoo.com
SSL: False]
Port: 587
Outgoing server requires authentication:Checked
So thank you for sharing connection information.

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage -- Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage --> Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.
But if exe is launched as standalone, then interface IExtractImage --> Extract, gives Bitmap to generate thumbnail of PDF document.
Above problem occurs only for PDF documents, if we tried same with other software like CAD -CATIA it works without any problem.
Is there any security concerns form PDF side, which doesn't allow to generate Bitmaps, if exe to generate it is launched form Windows service.

It might be deliberate, Acrobat and Reader software is not intended to run in a service environment.

How to export Registry values for Office 2010 in HKLM.

Hello,
I am trying to export all the Registry keys for Office 2010 in HKLM. All the Office 2010 based registry values in HKLM will be exported and need to be resotred after installing Office 365. So I need to export all the HKLM based Office keys before installing
Office 365 so later it can be restored.
Thanks
Ekta Verma

Then change the group policy, that's the solution to your problem. You've made the investment in Office 365 - forcing Office 2010 to launch is wasting that investment.
But what you are proposing won't work anyway, you would need to capture all of the keys and values in
HKCR\.doc, HKCR\.docx, etc, etc, etc for all of the file types.
Collecting all the registry values, crafting a script to put them all back, and managing that effort is a waste of time when the group policy could be changed in a matter of minutes. If someone argues against changing the group policy then tell them
to tell the guy who approved the purchase of Office 365 that he wasted the company's money.
If, on the other hand, you don't want users to launch Office 2010 yet, that's another story and I could go on and on debating both sides of the argument. Instead of spending the time mucking around the registry, try to repair Office 2010 instead:
msiexec /f <product code> /q
you can get the product code from HKLM\Software\Microsoft\Windows\CurrentVersion and just search for microsoft office from there. The key name it's in will be the same as the product code, which would also appear in the Uninstall registry value.
I hope this post has helped!

CR for vs2008 not connecting on Windows Server 2012R2

I have an application running on Windows Server 2008R2 which I urgently need to mirror on Windows Server 2012R2.
However, my crystal reports basic runtime for vs2008 version 10.5.1.0
and crystal reports basic runtime for vs2008(64) version 10.5.0.0 brings up the report but doesn't seem to connect to the
database (it seems to be pulling in a null dataset)
What am I doing wrong? [I tried opening all incoming ports, etc, etc]
This is the web.config line:
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
[changing this crashes the application]

Hi,
CR for VS 2008 does not support Windows Server 2012.
See this article: http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=56787567
Currently there is only one version of CR which supports WS 2012, SAP Crystal Reports for Microsoft Visual Studio.
http://scn.sap.com/docs/DOC-7824
You would need to upgrade to VS 2010 or VS 2012 and SAP Crystal Reports for Microsoft Visual Studio.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

How to install HR Global patch For R12.1.1 windows server 2003?????

Dear Friends
can any one help me to install patch HR Global patch For R12.1.1 windows server 2003,
i have R12.1.1 Vision but the payroll not working so i need help,i am not DBA,please
any one can help me to tell me step by step ,or if any one have good document to share it for me.
Thanks
Omar

can any one help me to install patch HR Global patch For R12.1.1 windows server 2003,
i have R12.1.1 Vision but the payroll not working so i need help,i am not DBA,please
any one can help me to tell me step by step ,or if any one have good document to share it for me.Please see these MOS docs.
Note: 145837.1 - Latest HRMS (HR Global) Legislative Data Patch Available
Note: 307195.1 - Example - Running DataInstall and Applying hrglobal.drv
Note: 734910.1 - Can You Run Hrms Datainstall and Apply Hrglobal.Drv Once for Several Legislative Patches
Note: 300097.1 - Oracle HRMS HRGLOBAL Basics
Note: 140511.1 - How to Install HRMS Legislative Data Using Data Installer and hrglobal.drv
Note: 188698.1 - HRMS: On What Server Do I Run The Datainstall Utility And Hrglobal.Drv
Apply the hrglobal.drv patch using adpatch -- https://forums.oracle.com/forums/search.jspa?threadID=&q=how+to+use+apply+patch&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to move an email from user mailbox to shared mailbox using apps for office mail app

How can I move an email from a users main mailbox to a shared mailbox using apps for office. I know I can do this manually but i am creating an for owa/outlook that would be a button to move the item. I have tried using ews but can only find
the commands to move emails inside the users mailbox
for example :
'<?xml version="1.0" encoding="utf-8"?>' +
'<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"' +
' xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages"' +
' xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types"' +
' xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">' +
' <soap:Header>' +
' <t:RequestServerVersion Version="Exchange2013" />' +
' </soap:Header>' +
' <soap:Body>' +
' <m:MoveItem>' +
' <m:ToFolderId>' +
' <t:DistinguishedFolderId Id="junkemail" />' +
' </m:ToFolderId>' +
' <m:ItemIds>' +
' <t:ItemId Id="' + id + '" ' +
' ChangeKey="' + changeKey + '" />' +
' </m:ItemIds>' +
' </m:MoveItem>' +
' </soap:Body>' +
'</soap:Envelope>';
Can I create a xml that would would do this? Is there a way to do it using the EWS service reference. I do not want to use import/export to do this.

yes I was able to make it work using Microsoft.Exchange.WebServices.Data and writing it as a web API, however i am unable to to authenticate the user if it is hosted on another server (without them retyping their password. I assume that
their is a matching java script version of what i am doing on the api side. I am just stuck trying to figure it out. the below code works as a Web Api if i could authenticate the user.
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2013);
service.Url = new Uri("Ews url");
service.Credentials = CredentialCache.DefaultCredentials;
//service.UseDefaultCredentials = true;
// Create a new folder view, and pass in the maximum number of folders to return.
FolderView view = new FolderView(5);
// Create an extended property definition for the PR_REPLICA_LIST property.
ExtendedPropertyDefinition PR_REPLICA_LIST = new ExtendedPropertyDefinition(0x6698, MapiPropertyType.Binary);
view.PropertySet = new PropertySet(BasePropertySet.IdOnly, FolderSchema.DisplayName, PR_REPLICA_LIST);
// get to the inbox folder of spam mailbox
Mailbox SpamMailbox = new Mailbox("Smtp of other mailbox");
FolderId SpamInbox = new FolderId(WellKnownFolderName.Inbox, SpamMailbox);
Folder SpamFolder = Folder.Bind(service, SpamInbox);
FindItemsResults<Item> findItems = service.FindItems(WellKnownFolderName.JunkEmail, new ItemView(10));
foreach (Item item in findItems)
item.Load();
ItemId ItemToMoveId = new ItemId(item.Id.UniqueId.ToString());
Item ItemToMove = Item.Bind(service, ItemToMoveId);
ItemToMove.Move(SpamFolder.Id);
//item.Move(SpamFolder.Id);

Using KMS for Office 2010 on Windows Server 2012R2

Similar Messages

Maybe you are looking for