Using LabVIEW RTE vs. LabVIEW ActiveX Automation Server (TestStand LVRTS) for a TestStand Deployment and experienceing Unabel to Launch LabVIEW.Application ActiveX Automation Server Error 18001
I am developing in TestStand 4.2.1 and LabVIEW 2009, I have accomplished the following:
1. Deployment package is built and deployed on PC
2. PC has activated TestStand Deployment License
3. LabVIEW 2009 RTE was selected as the adapter for the sequence and thus I believe the deployed testexec.ini contains this.
I am experiencing the following error: "see attachment".
Is the LabVIEW RTE the right selection?
Is there something I may have missed in building the deployment?
Do I need to register the ActiveX server.
THere seems to be conflicing solutions based on Version of TestStand and LabVIEW!!
Thanks!!
Attachments:
TS_LV ActiveX Error.doc 77 KB
Howdy mobiux,
Please consider KnowledgeBase 4V58058Z: -18001 Errors in TestStand. If you're using Vista or Windows 7, then this may apply as well. You might also consider ensuring you have the proper LV version active in the TS Adapter Options.
Warm regards,
pBerg
Similar Messages
-
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?
Sorry for double post, doesnt seem to be an edit option, this also works both ways.
-
i have macbook 5.2 and i am using Mac OS 10.5.8 . which one is good for me to upgrade and how to do that..plz help me
You have a 13" Early or Mid 2009 MacBook. Either one can run OS X Mavericks with enough RAM, 2 GB minimum. But first you will need to update to OS X Snow Leopard 10.6.8 so that you have the Mac App Store installed on your MacBook
Buy this from apple;
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Then download and update with this update combo;
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399
After this you will have the Mac App Store on your MacBook and you should be able to download and install OS X Mavericks for free!
Your MacBook must meet these minimum tech specs to run Mavericks;
http://support.apple.com/kb/HT5842 -
When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software
Servers have been swamped. Keep trying and be patient. Wait a few days.
-
Is there anybody who can help me fix this issue? I encountered this problem for almost to weeks now. I can't play video on You Tube using Safari browser for my MacBook Pro. Every time I tried to play video on You Tube. It shows
"500 Internal Server Error"
Sorry, something went wrong.
A team of highly trained monkeys has been dispatched to deal with this situation. (Followed by codes)
When I checked my other computer using Google Chrome and Firefox browser. There is no problem in playing You Tube videos.From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
I have been using one apple ID for 4 family members. Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?
stuartx4 wrote:
Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
That has a familiar ring to it -
uploading worked in the beginning, but in the last few days it has not. how should i proceed.
Go into Settings, iCloud on your iPad & iPhone. Turn streaming on there. I did that when I first set up my phone & iPad & have not had any problems. It will only stream over new photos so take one on your phone & see what happens. I hope that works for you.
-
I had two iphone 4 that were a part of my verizon account. both the phones were stolen and are apparently still being used. the device id for the white 4s is 99000267591838 and the black iphone4 A100003605d73e. Is there any way apple can check with verizon with my permission and verify and at least make the devices unusable to theives?
"Is there any way apple can check with verizon with my permission and verify and at least make the devices unusable to theives?"
You can report the IMEI to Verizon. -
Hi,
I have a windows 2008 R2 Enterprise servers with standalone MS-SQL 2008 R2 named instance. The server is having two networks, once production and the second for backup. The server FQDN is resolving to the production IP. The backup NIC
DNS dynamic update is disabled and an "A" record is registered with the dns. While trying to connect to the instance using the management studio:
Successfuly able to connect using the instance name, the production hostname, production IP and backup IP.
but while trying to connect to the insance using the backup hostname getting the below error:
"Login failed. The login is an untrusted domain and cannot be used with windows authentication. (Microsoft SQL server, Error: 18452) "
This is required for the backup tool to get connected using the backup FQDN of the server.
Should I need to create a host name alias, request you to kindly assist me with the best recommedation to fix this.
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspxHi,
It might be a kerberos issue. Check that there are valid SPN's registered using the setspn utility - http://technet.microsoft.com/en-us/library/cc731241.aspx
Thanks, Andrew
My blog... -
Enternal server error 500, message keeps appearing on home page bar where we use to have Fox news.
What can I do, a message keeps appearing saying enternal server error 500, on the home page on top bar. That was where we had the tab for Foxnews. But this problem is intermittent. Sometimes Fox news comes up where we use to get it.
The 500 Internal Server Error is a very general HTTP status code that means something has gone wrong on the web site's server but the server could not be more specific on what the exact problem is.
Below are few troubleshooting steps to resolve the issue:
1. Reload the web page. You can do that by clicking the refresh/reload button, pressing F5, or trying the URL again from the address bar.
2. Clear your browser's cache.
3. Delete your browser's cookies. -
Getting error 1035 using teststand deployment.
Whenever I do a Teststand deployment and I select to password protect my VI's, I get a very freindly and descriptive: Error 1035. I assume (because I am a LV user and have been trained to decode cryptic error messages) that this means that one of my VI's cannot be password protected. Any help is appreaciated.
Michael Aivaliotis
VI Shots LLCHi Michael,
I have been able to reproduce the error on my end and I have something I would like you to try.
The proper way to deploy a Project Library (*.lvlib) from TestStand is
to insert a Deploy Library step before you call the VI with the shared
variables. To get the Deploy Library step you right click in your
sequence and go to Insert Step » LabVIEW Utility » Deploy Library.
Right click on this step and go to Configure Deploy Library... Change
the Library Path to the Project Library (*.lvlib) that contains your
shared variables. Set the Operation to Deploy. When you are done
calling the VIs, you need to Undeploy using the
same step. Set the Operation to Undeploy.
Also, make sure you add the .lvlib file to the workspace as well. In the example you posted, when I completed these steps, I could build the deployment successfully. I hope this helps!
Matt S
National Instruments
Applications Engineer -
Activation Server Error Trying to Add A Book To Device
So I downloaded an ebook book from my library, where I hoped to add to my Kobo E ink reader using digital editions. I have added e books using ADE before however they were just ones I downloaded for free from online and not borrowed from a library. This one I have borrowed from the library is an epub file? Or a .acsm file? I managed to add it to my library on Adobe Digital Editions and just went to add it to my device (by clicking and dragging within ADE) however I got the error message saying:
E_ADEPT_NETWORK
I spoke to someone on Adobe's chat, who was useless unfortunately Told me to check clock/timezone/date etc which I did and to no avail. He also suggested adding ADE as a program allowed through my Firewall which again I tried with no success, where he then sent me a link to this forum! So fingers crossed one of you lovely people can help me more than this so called "expert"
Thanks!So I downloaded an ebook book from my library, where I hoped to add to my Kobo E ink reader using digital editions. I have added e books using ADE before however they were just ones I downloaded for free from online and not borrowed from a library. This one I have borrowed from the library is an epub file? Or a .acsm file? I managed to add it to my library on Adobe Digital Editions and just went to add it to my device (by clicking and dragging within ADE) however I got the error message saying:
E_ADEPT_NETWORK
I spoke to someone on Adobe's chat, who was useless unfortunately Told me to check clock/timezone/date etc which I did and to no avail. He also suggested adding ADE as a program allowed through my Firewall which again I tried with no success, where he then sent me a link to this forum! So fingers crossed one of you lovely people can help me more than this so called "expert"
Thanks! -
Problems using Labview as ActiveX Server
Hello,
I have been having difficulty using Labview as an AcvtiveX server. I have reviewed all the postings on this subject and most are either pre Labview 8.2 and thus do not account for the changes made between 8.2 and 8.5 which broke the Activex server functions. I have looked at the recommendations for changing the to code to export (exported vi's in a DLL or Source distribution) and have tried these with no success. The closest example I have found was posted here http://forums.ni.com/ni/board/message?board.id=170&thread.id=283417 the example code they posted does ont work for me and still generates and error 3005.
What i need is simple. I want to turn my applicaiton into a Vi server.. Expose a vi that acceses elements in the Vi server.. (controls, queues, Globals etc) that are in the Vi server context. I would then like to build a vi .. or dll that calls the 'exposed' vi in the vi server to pass data to or from the vi server. The V test.zip example file in the above indicated post is a pretty good example of this .. it just does not seem to work when i build it in 8.5. Are there any GOOD and 'current' examples of using labview as the ActiveX server (Compiled) and calling exposed vis from an external application Labivew, Visual Basic.. etc?? I am only interested in cases where Labview is the Sever. or both client and server.
I have used a tool "ActiveXplorer" to examine the registered "exe" when the viserver is run. It always shows that there is no Type Library associated and the object is not creatable. There is a .tlb created by the project build however, where as the previous version 8.2.1 of Labview did not build that correctly. I have also tried this on 8.6 with similar error 3005 generated. sooooo what am i missing?
Thanks
Louis AshfordMike,
Thank you for your response to my question. The problem is that the example you site does not use the Labview vi as the Server. Excel is actually the vi server and the automation open is using and excel automation object. I am sure that Excel creates proper automation objects .. Labview however does not seem to. So while this example shows how labview can function as a client it is not an example of a compiled Labview Sever being accessed by a 'laview vi'. Possibly I am not looking at the vi that you are thinking of.
The examples i am aware of:
"ActiveX Event Callback for Excel.vi... (Excel is server not Labview vi)
"ActiveX Event Callback for IE.vi (same Labview vi is client)
"Write Table to XL.vi" ( again excel is the server)
"3D Graph Properties - Torus.vi" (accesses an activex Control 'not' and Activex EXE)
"3D Lorenz Attractor Draw at Compeltion using 3D Curve.vi (Uses an activex control not activex Exe server)
"3D Parametric Surface - Ribbon.vi (Uses an activex control not activex Exe server)
"3D Surface Example - Fluctuating Sine Wave.vi (Uses an activex control not activex Exe server)
"Excel Macro Example.vi (Uses excel as automation server..not Labview)
"FamilyTree.vi (uses MSComctlLib.ITreeView object not Labview as server)
"SlideShow.vi" (uses PowerPoint._Application not Laview as server)
Most of the posts I have seen are for versions prior to Labview version 8.2 (where the ActiveX server was broken) I have seen only a few posts that actually address the issue i am talking about. however thus far no real solution has been offered. I get the same results when compiling and testing this with 8.6.. as well. So have you tried this Mike? Possibly i am missing something very simple..
The example i did find and gave the link to is a pretty simple one. This does not work on my machine at all. You can select the automation server that is registered with windows after running the server one time and this then breaks the client vi.. I have found by reselecting the GetViReference property node in the Client vi that it will the 'fix' the client vi as far as labview is concerened and it no longer shows and error. Now when you run the Client vi it will infact find the vi server and will launch it ok. However. The open automation object then hangs.. for quite some time then returns the error
"Error -2146959355 occurred at Server execution failed
in Client_reader.vi" Obviously the automation Exe (server) was seen because it was opened yet it did not return a valid reference so the subsequent property nodes in the client.vi will fail. Something is wrong with Labviews opening of or creating of automation objects..
Thanks,,
Louis Ashford -
Error launching the 'LabVIEW.Application" ActiveX automation server [Error Code: -18001]
Hello,
I have TestStand 2010 and LabVIEW 2010 development systems.
In the TS LabVIEW adapter is configured to use Development System.
Till today everything worked properly.
Today I tried to run TS sequence (which worked yesterday) and got error -18001.
I changed LV adapter configuration to use LVRTE and then back to Development System - and got error -18001 again.
Please see the image below.
LV2010 development system exists and I can use it: edit and run VIs.
How can this problem happen and how to resolve it?
Thanks in advance!
Attachments:
TSError_LV_App_ActiveX.JPG 135 KBHi,
there are multiple possible causes why you could encounter this error. Have a look in this KB:
http://digital.ni.com/public.nsf/allkb/5C692ACB049D0D30862575710051601F
cheers,
cheggers
Sascha E.
Group Leader Applications Engineering
National Instruments Switzerland
Maybe you are looking for
-
Open/Save Dialog does not show new files?
Say you are working on a logic file in a folder and you have a few audio and movie files in that folder, and you launch Logic and via the open/save dialog window you add a few files to your song and in that dialog window you can see all the files in
-
I am looking for an app to track something I do periodically easily. For example, there is a medication I take sometimes and I would like to go to a calendar type page and click on the date and have it record that I took that medication on that date.
-
Any example code for WVD spectrogram in labview ?
I heve been trying to implement the WVD spectrogram in my vi with no luck. Can't find any examples on how to do it.
-
Can you buy iTune gift for some one in a different country
I live in canada and would like to buy itune gift for someone in the USA how do I do this? Is it possible?
-
Escaping the comment character
I need to include the following in a string but can't get it to escape the comments characters. " select /*+ORDERED*/ field1 ... "; Thanks in advance, Grey