Using Laptop to time sprints and running events

I would like to use a computer to assist in timing and keeping track of 15 soccer players that I coach. The timing accuracy need only by one tenth of a second. I'm not looking for anything fancy, just a simple method for the kids to time themselves as they practice each day.
Can anyone help me with a reference or two?
thanks

I guess I should provide more info to make the question more clear. I would like to time sprints (never more than one lap). The key would be some type of hardware accessory that would turn on the stopwatch at the 'start' and some time of switch to stop the stopwatch at the 'finish'. That way the boy/girl could time themselves. That's my goal. To allow the kids to time themselves each day at practice when they do they 40 yard sprint. I was thinking of a switch under their foot that activates when they step/lift their foot. Another alternative would be a light beam that "switches" when the beam is broken.
Any ideas?

Similar Messages

Can I have two Time Capsules in the same network, use one as Time Machine and other to expand network?

I need to purchase a divice to expand my Wi-fi network. I was looking at the AirPort Extreme, but a friend has a brand new Time Capsule for sale. So, for the same price of the AirPort Extreme, I´m getting the Time Capsule.
I already own one and using it as Time Machine and wireless router. If I decide to purchase another TC would it have any conflict with the one that I already have?
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?

If I decide to purchase another TC would it have any conflict with the one that I already have?
No
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?
Yes. The important thing to remember is that the "extending" Time Capsule must be located where it can receive a strong wireless signal from your "main" Time Capsule.

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

The application "Numbers" can't be opened. I have used numbers many times before and cannot currently open the application.

The application “Numbers” can’t be opened. i have used numbers many times before and cannot currently open the application. My Mac is a 10.9.4 Mac.
thank you, Mary

Hello maryfromkailua,
Unresponsive apps can be frustrating. After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning app issues:
OS X Mavericks: If an app freezes or quits unexpectedly
There are several solutions to try.
If the app is frozen, force quit the app. Press Option-Command (⌘)-Esc, select the app, then click Force Quit.When you force an app to quit, you may lose unsaved changes.
If the app quit, reopen it by clicking Reopen in the dialog that appears.
Restart your Mac.Methods for starting up your Mac
Read the app’s documentation to check if it’s compatible with your version of OS X.
Open another file in the app. There may be a problem with the original file.
Check for updates to your software.Keep your Mac up to date
Disconnect any peripheral devices you just connected (for example, a printer). They may not be compatible with your version of OS X.
Uninstall any app plug-ins or enhancements from other manufacturers.If you recently updated the app or OS X, a plug-in or enhancement you installed may no longer be compatible.
Use Apple Diagnostics or Apple Hardware Test. These tools can tell you if hardware you installed, such as additional memory, is incompatible, improperly installed, or defective.Use Apple Diagnostics or Apple Hardware Test
Restart your Mac in safe mode.Start up in safe mode
Use Disk Utility to repair your computer’s internal disk.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Using + and - keys to change dates and times; Find and Replace event

Hi all, \
I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

Don,
...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
;~)

Using Mac Mini, Time Machine and External Hard Drives as a Backup Server

Hello...
I own a graphic design studio and have been looking for a long time to create/buy a no-thinker backup system for my macs. I have 4 workstations that I would like to backup to one central "server".
So what I was thinking was buying a Mac Mini, 3-4 external USB 2.0 Hard drives, external Blu-Ray burner and upgrade all our systems to OS 10.5. What I need to know is, will each work station with Time Machine on it back up across the network to a specific drive on the Mac Mini? If I have each workstation automatically mount one external across the network onto the desktop, will Time Machine recognize that hard drive as a legitimate drive to backup to?
Having the external Blu-Ray disc burner will give me the ability to burn data to a disc so I will have a way to take some of my information off-site. Since we are a graphic design studio, we use large amounts of disc space and regular DVD-R (4.6 gigs) is just not enough to back up some projects.
Can someone enlighten me, and tell me if this would work or not. It's the only way I can see me creating something that has enough space, will back up automatically across the network and allow me to make off-site copies of my data without spending $5,000.00.
Thanks for any comments you might have on this topic.
-SoupGFX

I'm a member of a freelance graphic artist team and have been scraping by with my MacMini and CS3. I recently obtained a used iMac (approx. 2 years old) and, instead of painstakingly transferring everything left on the Mini to the iMac, I wanted to know if it's possible to turn the MacMini into a pseudo external hard drive using the FW800 port.
I already had an external attached to the Mini and plan on using that as well, but I tend to hoarde information and run out of space really quickly. So keeping the mini around, preferably in a way that I can access it as an external through my iMac, would be perfect. I have very little experience with networking and don't have a wireless connection (yay modem cables!) so I don't quite know how to figure this out.
Has anyone done this? Would a FireWire 800 work? Would I need to set up a network between the two and use them as independently connected computers?

I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T. I have an IMac on order but don't have it here yet.
My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
Where do I start?
Which device connects to my modem first, the TC2 or the Netgear?
Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
Thanks.

It is pretty simple..
Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
v6 will be as
With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

Time Capsule- Can i use it for Time Machine and store media files?

Hi,
I'm very new to Time Capsule (have a 1TB TC), but have been using Time Machine to back up my MacBook Pro onto an external HD for a while now.
Here's my question. is it possible to use the Time Machine capabilities of Time Capsule while also using it to store music and picture files. Ideally I'd like to be able to have my iTunes and iPhoto library available on the Time Capsule. that way it could be centralized and readable from a few Macs in the house.
Thanks!

brianfallen wrote:
When you say the info on it won't be backed up. What do you mean "the info on it"? Do you just mean the mp3, AAC ...etc files aren't backed up because they live on the TC only?
I just want to make sure cause I did the same thing but I want to make sure I wont lose all my music and photos.
If the only place you have these music and photo files is on the TC HDD, then if the TC HDD fails, you lose all those files. Here's another option. TC has an archive feature. That means you can, via AirPort Utility -> Disks, use the Archive feature to clone the TC HDD onto a USB HDD attached to the USB port of TC. It's not like TM, making incremental backups. You have to manually archive it, but it is an alternative.
My photos remain on my iMac internal HDD. That means they are backed up by TM onto the TC HDD. If my iMac internal HDD fails, I still have the TM backups. I also backup yearly photos to DVDs. Photos are irreplaceble, you know.

How to return a specific date/time range and last event details, when checking the event log via command prompt

I am new to scripting (literally started reading/learning scripting a few hours ago), and I am stuck in trying to get my current script/command to filter a specific date range.
* Note: I am working with Server 2003 and 2008; because of the environment I am in, a lot of scripts (such as Powershell and VBScript) don't work; trying to stick with command line, as it appears to be the only thing that functions correctly in my environment
I am trying to search the System log in event viewer, for the most recent server reboot. Here is the command that I am currently running:
===========================================================
C:\Windows\System32\cscript C:\Windows\System32\eventquery.vbs /L System /FI "id eq 1074"
===========================================================
When run, the output looks like this:
===========================================================
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved
Listing the events in 'system' log of host 'xxxxxxxxxxxxxxx'
Type Event
Date Time Source
Information 1074
12/18/2013 2:48:06 AM USER32
Information 1074
11/20/2013 3:25:04 AM USER32
Information 1074
10/23/2013 2:06:09 AM USER32
===========================================================
What I would like it to do is only show events that have happened in the last seven days, as well as show the event details if it does find an event that matches the criteria.
Any help would be greatly appreciated. Thanks!
Nick

I would prefer using Powershell , you can use below code
function Get-EventViewer
param(
[string[]]$ComputerName = $ENV:COMPUTERNAME,[string]$LogName,[int]$eventid
$Object =@()
foreach ($Computer in $ComputerName)
$ApplicationEvents = get-eventlog -logname $LogName -cn $computer -after (Get-Date).AddDays(-7) | ?{$_.eventid -eq "$eventid" }
foreach ($event in $ApplicationEvents) {
$Object += New-Object -Type PSObject -Property @{
ComputerName = $Computer.ToUpper();
TimeGenerated = $event.TimeGenerated;
EntryType = $event.EntryType;
Source = $event.Source;
Message = $event.Message;
$column1 = @{expression="ComputerName"; width=12; label="ComputerName"; alignment="left"}
$column2 = @{expression="TimeGenerated"; width=22; label="TimeGenerated"; alignment="left"}
$column3 = @{expression="EntryType"; width=10; label="EntryType"; alignment="left"}
$column4 = @{expression="Source"; width=15; label="Source"; alignment="left"}
$column5 = @{expression="Message"; width=100; label="Message"; alignment="left"}
$Object|format-table $column1, $column2, $column3 ,$column4 ,$column5
$Object.GetEnumerator() | Out-GridView -Title "Event Viewer"
You can do a function call like
Get-EventViewer -LogName system -ComputerName "computername" -eventid "2017"

Network set up using airport extreme, time capsule and airport express

I have searched for relevant answers but can only find different bits here and there.
My set up is as follows:
I have a Linksys wireless router running a stable wireless network for the other computer users in the house and wish to create an extended, additional network using airport extreme connected to the Linksys by ethernet to create the network and then time capsule close to my Mac Mini on my desktop and airport express at the other end of the house to try and extend the range of the network.
I have been trying for 4 days to set this up but without success. I have tried all of the options mentioned in different posts, using WDS, extending a new network etc. I can get connection between the three devices but monitoring on iStumbler there appears to be little improvement in the strength of the signal, iStumbler also shows the time capsule dropping it's signal totally every 10 or so seconds for a few seconds and then I get a positive signal strength for another ten seconds or so.
Can anyone help, it is driving me insane. I am a recent convert to apple computing and have been hugely impressed with all products until now. The claim that the set up of these wireless products is simple seems to be very exaggerated.
I am happy to provide any relevant system or hardware information.
Thanks in anticipation.

I have an AirPort Extreme acting as a wireless base station, connected to a BT router by ethernet.
Then the correct setting for Connection Sharing on the AirPort Extreme would be "Off (Bridge Mode)".
If I set Connection Sharing to "Share a public IP address", I'm told that: "The DCHP range you have entered conflicts with the WAN IP address of your Apple Wi-Fi base station"
Exactly. You have two routers....The BT device and the AirPort Extreme in series with both of them trying to act as the "main" router when you configure the AirPort this way. That won't work.
Only one can be the main router, and it must be the BT device in your setup. So, the AirPort Extreme....and any other AirPorts on your network must be setup to work in Bridge Mode to allow the network to operate correctly.

Partitioning Hard Drive for Use with Mac (Time Machine) and Windows

I have a brand new Imac on which I am also running WIndows Vista through Boot Camp (sweet, by the way). I have a large external hard drive on which I set up Time Machine easily enough. I would like to partition the drive somehow so that I could use half the drive to separately back up files on the WIndows side, but I can't seem to do this. Any suggestions? Is this even possible with Time Machine?

You can use Disk Utility create two partitions. Choose FAT for the Windows partition and Mac Extended (Journaled) for the Mac. One limitation of FAT32 is that you can't write files bigger than 4GB. You can reformat this partition as NTFS within Vista which will allow bigger file sizes but you won't be able to write to this partition from within OS X without other utilities. Also you can't write to the OS X partition from Vista without other software.
Time Machine will not be able to back up the windows formatted drive partition.

Time Constraints and Boundary Events in BPM

Hi all,
I have done the following:
In the Task window, Time Constraints tab
- Checked "Define a default completion deadline" with the offset as 3 minutes.
- Checked the "Raise critical exception when deadline is reached" checkbox.
In the boundary events for the activity, I have added "CompletionDeadlineIsCriticalException".
From the boundary event, I have linked to to another activity that belongs to another user (User B).
When i am testing the BPM, the task goes into a Suspended status after 3 minutes. However User B did not received a new item in the UWL.
In the NWA, "Manage Process: Process Instances", i can see that Task is escalated by null and the status is suspended.
Does anyone has any advice over here?
Thank you.

Hi,
i have checked the BPEM-CORE version as instructed.
It says 1000.7.11.2.0.20090321233900
Does that means I need to update to the latest patch?
Please also check the version of your NWDI build plug-in BPEM-BUILDT in the respective NWDI track. This is used to build Process Composer DCs in your NWDI.
I am in the Development Infrastructure Perspective in NWDS
How do i check the version number for BPEM-BUILDT in the NWDI?
Thank you.

Using the the multiple profiles and running more than one instance of Fire fox at atim

I use F/F in a gaming situation I needed to be able to run more than one session at a time and read about a feature called multiple profiles. Then I read iin another forum that I could have multiple instances with the following bat file :
@echo off
set MOZ_NO_REMOTE=1
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -p-no-remote
set MOZ_NO_REMOTE=0
I also have the Beta 4.06 on my machine and even though the batch file directs it to wither the Beat or the Non Beta they both seem to track the profiles and can be used in either version.
However It's not working as I described running two browsers with grease monkey it will start to mis handle data and they both lock up

There is no need to set MOZ_NO_REMOTE, remove that part of the bat file. Change the start line to:
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -no-remote -p "profile name"

Simple question: using mainstage as sound module AND run multi tracks live

i want to play live, using my mac book pro, mainstage as a sound module while running several (audio) outputs/tracks at the same time. is this possible and how is it done? i don't want to change to ableton live! thx a bunch everyone!

If doing vocals and latency is a problem, you can also experiment with taking your live (dry) signal direct (if you interface allows this) into your mix, which will be zero latency. Live signal also goes through MainStage to apply effects such as reverb and delay, and you feed the wet only signal to a separate "vocal fx" mix channel.
Of course, you can't apply plug-in based eq and compression to the realtime signal (or your back to the latency problem), you would have to rely on hardware/mixer for that. I have experimented with this method with good results...
Others have reported not being bothered by the amount of vocal latency, but I wonder...

Using Laptop to time sprints and running events

Similar Messages

Maybe you are looking for