Using LCM in step by step

Hi Guys,
Using LCM we can move reports one environment to another environment (dev to prod).I move report dev to prod.But where can i see this report in prod server .In infoview or cmc help me anyone and tell me detail steps plz
Regards,
Teja

Hi Teja,
Please have a look on below link for using LCM :-
[http://howtobi.wordpress.com/category/businessobjects/lcm/|http://howtobi.wordpress.com/category/businessobjects/lcm/]
Let me know if you need any information
Regards,
Rameez

Similar Messages

Step by Step Instructions for Installing Self Signed Certificate using Certificate Modification Tool

I am looking for some step by step instructions for installing the self signed certificate from my Microsoft SBS 2003 server on a Treo 755p and 750p. In particular I need some help with the form of the actual certificate and how to use the Certificate Modification tool.
Some questions I have are as follows:
1. When I install the certificate on a Windows Mobile device I used an exported version of the certificate. This export is done using the DER x.509 format. Is that the same form I’ll need for the Palm? Do I need some other form? Can/should I just use sbscert.cer file that is generated when SBS is configured?
2. Does the self signed cert need to be installed on the computer being used to update the Palm or do we just need to be able to access the appropriate .CER file?
3. There are three things included in the PalmCertificatesTool.zip file:
                                Trusted CAs (folder)
                                Cert2pdb.exe
                                PalmCertificates.exe
   How do I use these tools?
4. It looks like the PalmCertificates.exe file opens an interface that will allow me to browse to the desired .CER file. Then I suppose I use the < Generate PDB > to create something that needs to then be uploaded to the Palm device? Not having any real experience with a Palm device how do I upload and install this file?
5. Once uploaded do I do something on the device to install it?
If there is some white paper that provides step by step instructions on doing this that would be great.
Thanks,
Walt Bell
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

Thanks for that.
I have one question after reading the article 43375:
The article has you "Turn of AutoSync" and then "Reset the device". It then indicates the device should be left idle.
The next step relates to running the PalmCertificates.exe, navigate to the certificate file and add it and then run the < Generate PDB > button. Should the device be connected to the computer during this process? If so, at what point after the reset do you connect it to the computer?
Thanks!
Post relates to: Treo 755p (Verizon)

Help wanted - step by step process on how to use two ipods on one computer

I'm just in the process of getting an ipod (waiting on delivery!) and want to know how it is possible to have two ipods using the same computer but synchronizing differently. I don't want to risk losing my partners music (he'll be very upset!) and I don't want to end up with his music on my ipod. I'd appreciate it if someone could give me a step by step guide or tell me where the best place to look for the answer is. Is it possible somehow to have two different libraries on one computer? Is that how it works?

There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two as Chris has already described above is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

HP LaserJet 4050N set up using IP *SUCCESSFUL step-by-step guide*

I have had sooo many difficulties in attempting to set up my HP LaserJet 4050N using an IP address connected to my iMac via Ethernet… but tonight I have finally succeeded! So for the benefit of anyone else who is having difficulties here is a complete step-by-step guide to how I achieved it.
1.
In ‘System Preferences’ in ‘Network’, I made sure that ‘Ethernet’ is set to the following:
‘Configure IPv4: Using DHCP’
Two numbers are given:
‘IP Address’ and ‘Subnet Mask’
(you might need to click ‘Renew DHCP Lease’ by clicking ‘Advanced’ and under ‘TCP/IP’ clicking ‘Renew DHCP Lease’)
WRITE BOTH OF THESE DOWN!
2.
Go to ‘Applications’ folder and click on ‘Utilities’ and open ‘Network Utility’. Click on the ‘Info’ tab and from the drop-down menu select ‘Ethernet’.
The ‘IP Address’ should be the same as that given in the ‘Network’ settings panel for the Ethernet port.
3.
On my HP LaserJet 4050N I went through the following menus:
Click the green ‘GO’ button until the display reads ‘Offline’
Click ‘MENU’ 7 times or until ‘EIO 2 JETDIRECT MENU’ shows
Press ‘ITEM’ button until ‘CFG NETWORKJ=NO *’ is displayed
Press ‘VALUE’ button until value reads ‘YES’
Press ‘SELECT’
Press ‘ITEM’ button until ‘CFG TCP/IP=NO*’ is displayed
Press ‘VALUE’ button until value reads ‘YES’
Press ‘SELECT’
Press ‘ITEM’ button until ‘BOOTP=NO’ is displayed (or press ‘VALUE’ button until value reads ‘NO’ and then press ‘SELECT’)
Press ‘ITEM’ button until
‘IP BYTE 1=XXX’ is displayed and where I have put ‘XXX’ using the ‘VALUE’ button enter the first number of the ‘IP’ address given in ‘Network Utility’.
Repeat this procedure for ‘BYTE 2, 3 AND 4’ by using entering a value each time using the ‘VALUE’ button and then pressing ‘SELECT’ before finally moving onto the next ‘IP BYTE’ value using the ‘ITEM’ button.
After all of the ‘IP’ values have been entered pressing the ‘ITEM’ button will display ‘SM BYTE 1=XXX’ – this is the ‘Subnet Mask’ value. Follow the same process as for the ‘IP’ address and enter the values given in the ‘Ethernet’ pane in ‘Network’ under ‘System Preferences’.
After entering the final ‘Subnet Mask (SM)’ value (BYTE 4) press ‘SELECT’ and finally press the green ‘GO’ button.
As soon as the green ‘GO’ button has been pressed the ‘IP’ value in both ‘Network’ (under ‘System Preferences’) and ‘Network Utility’ (Applications/Utilities) will change to display a new ‘IP’ address. The ‘Subnet Mask’ value displayed in ‘Network’ (under ‘System Preference’s should display the same ‘Subnet Mask’ value).
4.
Now close ‘Network Utility’.
Click on the ‘SHOW ALL’ tab in the open ‘NETWORK’ window.
Click on ‘Print & Fax’ in ‘System Preferences’.
Click on the ‘+’ tab on the left of the ‘Printers’ Pane.
Click on the ‘IP’ tab.
From the drop down menu ‘Select HP Jetdirect – Socket.’
Now in the Address field enter the ‘IP’ values that you entered in the printer (and that you wrote down earlier).
Once entered click ‘Add’.
I really hope that what has worked for me works for anyone else who is struggling to set up their HP printer using IP over Ethernet. Please post any success.
Kind regards
Neil.

Thank you, Neil! Your instructions worked.
Several comments to clarify your instructions.
They mostly expose my simple minded understanding of computers....
1. At the line in part 3 beginning with " ‘IP BYTE 1=XXX’ is displayed...", the 'XXX' means the first set of numbers before the first '.' in the IP address. For an IP address of '78.123.4.56', that means '78'. You push the 'VALUE' button many times if the number is three digits. IP Byte 2 for the same IP address is '123'. Etc.
2. When you have finished all the steps, it works! What a relief.
The printer will appear in the print dialog box as an IP address.
3.You can change the name of the printer if you want.
Go to System Preferences>Print&Fax
Select the printer. (it is listed by its IP address number)
On the right side of the box will appear several buttons.
One button is 'Options & Supplies'. Click it.
Another box will drop down.
Choose 'General' from the 'General / Driver / Supply Levels' buttons at the top of the box.
The name of the printer will be defaulted as the IP address.
Type in whatever name you want for the printer
Click 'OK'
4. It may be possible to go one step further and connect the HP LaserJet 4050N
printer to the computer through an airport express, but I have
had enough frustration the past two weeks that I am not that curious. Yet.
Once again, thank you Neil!
Bob

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

Step by Step how to Use Java Beans in Form 6i

Dear All,
Can anybody tell me step by step how to use Javabeans in form 6i.
What i want is to know which form is getting executed and by whom with ip address on application server.
When is execute the form made using javabeans
Best Regards,
Devendra

Hello,
<p>Here is the best way to start with Javabeans.<br>
After reading that, you can see if this bean can fit</p>
Francois

Step by Step procedure to create an entire scenario Using CAF

Dear All,
I have a scenario to develop using Composite Application Framework.After creating the CAF i need to display the CAF on the portal. step by step procedure(if possible with screen shots) to create a CAF and how to find web services and then display this application on portal.
Thanks

Hi Yogi,
In your sceanario if you are looking to build either Enity or Application service then create it and test that service from "Service Browser". Once your service is working as per your reqyurements then we have to options to bring it into the Portal:
1. Generate Web Service for you Service (Entity or Application).
2. Consume that Web Service in WebDynpro application using Model concepts.
3. Deploy your WebDynpro Application into your portal Server.
4. Create a WebDynpro iView for your application and assign it any where you want.
OR
1. Generate WebDynpro model for your CAF application.
2. Create a public part for you application webdynpro project of your CAF application.
3. Create a new WebDynpro DC and use the Models generated for your CAF application.
4. Deploy your WebDynpro Application into your portal Server.
5. Create a WebDynpro iView for your application and assign it any where you want.
If you can give your complete scenario then that would be more helpful for any one to provide best answer which is approapriate for you.
Thanks,
Uday.

Step by Step guide to transfer movies to iPod - using PC

I am looking for a step by step guide to transfer movies to my iPod... i have a PC and need to transfer DVD movies to my iPod. i know that there is a process, somewhat tedious, but i cannot find instructions anywhere on the steps to do it. i purchased quicktime pro and i know that i need to decrypt the DVD (??) and rip (??) the files to my harddrive, then convert the .vob files to .m4v using something like Videora (??). I just am not sure about the actual steps. Please help!!!

Trying to help. I think you will find that any answer that gives directions here on Apple <might> be a contravention to agreements regarding licensing abp from Apple therefore your directions (and efforts) would best be spent on 'another search engine' for an answer to that question. Note that I am simply respecting Apple's position and the fact that movies are not free to rip or copy them for any reason outside of licensing agreements.
Sony Vaio Windows XP Media Stream and Production

I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step

I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step
Attachments:
this is a java file changr the jpg to jar .jpg ‏101 KB

I'd recommend searching the forums to find your answer. http://forums.ni.com/ni/search?submitted=true&q=java+labview

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein

Is there a step by step somewhere for using the iCloud Beta?

Windows 7 64bit / iTunes 10.4.80
Is there a step by step somewhere for using the iCloud Beta? I assume we can activate it after reading Apple advertizing on the Beta and 10.4.80. I don't see anything on iTunes that would get me there - Thank you for your help - IM

Thank you for the assistance, I greatly appreciate it!

I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Ligh

I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Lightroom software. Also I wan to know what should be the aspect ratio to do so.Thank you in advance

The aspect ratio should be set to 200x280, or equivalently 5x7.
I don't think it is possible to do the cropping automatically in Lightroom, you'd have to do this image by image to crop the faces correctly.

Step-by-step custom Credential Mapping using weblogic 10.3 SSPI

Folks,
I am trying to implement custom Credential Mapping using weblogic 10.3 SSPI. Am sure that few of you have already implemented the same. But here my questions in reagrds with the implementation
Right now, I have below
1.MyCredentialMapperImpl implements CredentialMapperV2
1.Overridden getCredential and gerCredentials method.But I am not sure what are all the other methods , I should implement here.
2.MyCredentialMapperProviderImpl implements CredentialProviderV2
Questions.
1.How to get ContextHandler to pass as param in MyCredentialMapperImpl -->gerCredentials method.
2.Should I need set up a database after deploying the MBean ?
3.How do I execute above implementation ?
4.Can I see the SAML Token in my client ?
If possible Please send me the step-by-step custom Credential Mapping implementation.
Thanks in advance.
Ravi

Hi John,
I would like magic of course. However, in this case I want something special: my authentication provider uses special means and contents of headers, cookies and service from external identity management systems to determine the user's identity.
I do not want the application to present the login dialog! I want to derive the identity and the fact that the user is logged in from whatever the authentication provider returns in terms of Subject.
Ideally, the flow is something like:
- user accesses an unprotected resource - resource is shown, no interaction with authentication provider
- user presses a link or button that takes him/her to a protected resource
- the authentication provider is contacted to work with the identity asserter to establish the identity of the current user and create a subject object for this user
- the application can access the subject and principals
- ADF Security recognizes the identity and the roles (based on the principals) and coordinates access based on this.
the authentication method is client certificate. presumably this prompts WebLogic/OPS to use an identity asserter to work with custom headers and cookies ("... when you configure a web application to use CLIENT-CERT authentication. In this case, WebLogic can perform identity assertion based on values from request headers and cookies. If the header name or cookie name matches the active token type for the provider, the value is passed to the provider."). No login form should be presented to the user, as all information required to perform the authentication is already available.
I am trying to understand what I must do to have the ADF application adopt the subject set by the authentication provider - if anything?!
If you more ideas to share - I would love to hear them.
best regards,
Lucas

V.Important: How to use se24 to build a class step by step: Points assured

hi all
I am new to OO based abap programming. I want to build a class using SE24 but i dont know where to put the various pieces of code in SE24.
Can anyone please provide a step by step procedure (including screenshots) on how to use SE24 to build a class using most of the features like constructor, attributes , interface , friend etc.
Documents would be more helpful as compared to links.
Points will be awarded
thanks in advance

Hi,
Just follow the below givenlink. Using this you can create a class in SE24.
http://help.sap.com/saphelp_nw04/helpdata/en/b3/f4b1406fecef0fe10000000a1550b0/content.htm
I think the below document would be
a very good introduction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0a33479c-0b01-0010-7485-dc8c09d6bc69
See the Following Dem Program:
DEMO_ABAP_OBJECTS Complete Demonstration for ABAP Objects
DEMO_ABAP_OBJECTS_CONTROLS GUI Controls on Screen
DEMO_ABAP_OBJECTS_DIALOG_BOX Splitter Control for Screen with Dialog Box
DEMO_ABAP_OBJECTS_EVENTS Demonstration of Events in ABAP Objects
DEMO_ABAP_OBJECTS_GENERAL ABAP Objects Demonstration
DEMO_ABAP_OBJECTS_METHODS Demonstration of Methods in ABAP Objects
DEMO_ABAP_OBJECTS_SPLIT_SCREEN Splitter Control on Screen
Regards,
Padmam.

Using LCM in step by step

Similar Messages

Maybe you are looking for