Using LE 9 in 64 bit mode

I am hoping to use Spectrasonics instruments such as omnisphere in LE 9 but I was wondering if I need more ram to cope qith this. Also, should LE 9 automatically be in 64 bit mode or do I have to set it myself.

Hi Fox
Thanks for you reply. I have downloaded the update and it is 64 bit now.

Similar Messages

Logic 9.1.5 using more CPU in 64 bit mode

Yesterday updated to Logic 9.1.5
Have opened up projects in both 32 bit and 64 bit mode (but only 32 bit kernel as my mac pro is too old for 64 bit kernel).
Projects in 64 bit mode spike the CPU meter, and result in clicks and pops during playing.
Quit Logic, change to 32 bit mode, reopen same project. CPU meter reading lower, no clicks and pops on playback.
Now its an older machine (Mac Pro 1,1) and I am also running Vienna Ensemble Pro with a 9 GB template loaded up, but not connected to these projects I am opening, naturally this is taking resources.
Anyone else notice similar results, that the 64 bit mode causes projects to use more CPU?

In 64bit mode, are you using any 32bit 3rd party plugins within these projects? The 32bit bridge might be taking a hit on the cpu. From my experience, Logic in 64bit mode with 64 bit plugins has slighly less cpu usage than 32 bit mode. You may want to try a project with only Logic plugins in both modes for a true comparison on your machine.

Using generic drivers in 64-bit mode for eSATA card with Marvell 88sx7042

Hello, all. I'm wondering if anyone knows of a way to plug the eSATA card's pnp info into, for example, one the plugins in the IOATAFamily kext so that it will mount in 64-bit mode. I've tried this, and simply inserting the supplied kext in the IOATAFamily kext -- the card is recognized in 32-bit mode, but in 64-bit mode, the card is recognized, but System Profiler reports that no drivers are installed. Of course, my generic JMicron card will load, but it is not Port-Multiplier aware, which renders it useless as the relevant external is a hardware RAID. TIA for any replies.

Does this help
http://support.apple.com/kb/ht3443
It does not cover Mavericks but you may get some ideas.
Have you got AppleCare or had the machine less than 90 days, if so give Apple a call.

Magic Mouse not working in 32 bit mode?

Hello,
I decided to boot my 64-bit 8 core Mac pro in 32 bit and the mouse (bluetooth apple magic mouse) was not working... The keyboard did work however.
Im not necessarily looking for a remedy to this problem as I don't really plan on using my system in 32 bit mode on a regular basis..... I was just wondering why it might be doing this..
Anyone have an idea?

Never mind... this is the MAC Pro section!
I must be really out of it this morning.... :/
Message was edited by: MACATTACK2010

Firewire video in 64 bit mode - is this still a problem?

I've been holding off on upgrading from Logic 8 to 9 for a myriad of reasons, but the biggest head-scratcher for me is that you can't run Firewire video (or Digital Cinema Desktop, for that matter) in 64 bit mode.
Does anyone know if this issues still exist in 9.1.2/9.1.3?
Makes it very tough to score to picture when you can't see the picture...

This ONLY effects the 64-bit mode! And because Mac OS X doesn't offer this in 64-bit QuickTime, this problem still exists. But if you use Logic 9 in 32-bit mode, just like Logic 8, it will work fine.

How to run in 32 bit mode on a mac 10.6.7 so I can use Rapport Trusteer

The security software Rapport Trusteer for HSBC bank has just been updated to run on Firefox 4 but will only run in 32 bit mode, I am using Snow Leopard 10.6.7. How do I change Firefox 4 to run in 32 bit mode?

You're welcome

Running Firefox 4.0 on Mac OSX 10.6.6, using ATT mail, when I create a new email I get a browser message saying, "This page requires a plugin that can only run in 32-bit mode," and I have to restart Firefox in 32-bit mode. Is there any way around this?

I am assuming the plugin that the Firefox message is referring to is for attaching a file to the email. I say this because at the bottom of a new email it has a link that says "Attach files more easily" which, when you click it, takes you to a setup process where you download an att updater. I ran that and it did seem to change anything. I am wondering if there is anything I can do to make Firefox handle this page without having to restart in 32-bit mode every time.

That means that you need to run Firefox in 32 bit mode if you want to use that plugin.
# Close Firefox
# Open the Applications folder in Finder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox

Compilation of C program in 64 bit mode using gcc

How do i compile a C program in 64 bit mode using gcc 2.95.2. I am using Sun Os 5.8.
Pls give the command

When i use the follwing script
cc -w -v -DSOLARIS -DSOLARIS2 -m64 -c $1.c -I./. -I/usr/lib/sparcv9 -I/usr/include -I/usr/include/sys -I/usr1/soft/smshdr -I/oracle9i/precomp/public -I/oracle9i/sqllib/public
I got the following error .. Pls help
Reading specs from /opt/sfw/lib/gcc-lib/sparc-sun-solaris2.8/2.95.2/specs
gcc version 2.95.2 19991024 (release)
/opt/sfw/lib/gcc-lib/sparc-sun-solaris2.8/2.95.2/cpp -lang-c -v -I./. -I/usr/li
b/sparcv9 -I/usr/include -I/usr/include/sys -I/usr1/soft/smshdr -I/oracle9i/prec
omp/public -I/oracle9i/sqllib/public -D__GNUC__=2 -D__GNUC_MINOR__=95 -Dsparc -D
sun -Dunix -D__svr4__ -D__SVR4 -D__sparc__ -D__sun__ -D__unix__ -D__svr4__ -D__S
VR4 -D__sparc -D__sun -D__unix -Asystem(unix) -Asystem(svr4) -w -D__arch64__ -Ac
pu(sparc64) -Amachine(sparc64) -DSOLARIS -DSOLARIS2 XCupCRC.c /var/tmp/cckMTbiU.
i
GNU CPP version 2.95.2 19991024 (release) (sparc)
#include "..." search starts here:
#include <...> search starts here:
/usr/lib/sparcv9
/usr/include
/usr/include/sys
/usr1/soft/smshdr
/oracle9i/precomp/public
/opt/sfw/include
/opt/sfw/lib/gcc-lib/sparc-sun-solaris2.8/2.95.2/../../../../sparc-sun-solaris2
.8/include
/opt/sfw/lib/gcc-lib/sparc-sun-solaris2.8/2.95.2/include
/usr/include
End of search list.
The following default directories have been omitted from the search path:
/opt/sfw/lib/gcc-lib/sparc-sun-solaris2.8/2.95.2/../../../../include/g++-3
End of omitted list.
/opt/sfw/lib/gcc-lib/sparc-sun-solaris2.8/2.95.2/cc1 /var/tmp/cckMTbiU.i -quiet
-dumpbase XCupCRC.c -m64 -w -version -o /var/tmp/ccqeBknF.s
cc1: -m64 is not supported by this configuration
cc1: -mptr32 not allowed on -m64
GNU C version 2.95.2 19991024 (release) (sparc-sun-solaris2.8) compiled by GNU C
version 2.95.2 19991024 (release).
XCupCRC.c: In function `XCupCRC':
XCupCRC.c:45: internal error--unrecognizable insn:
(insn 208 206 210 (set (reg:DI 10 %o2)
(symbol_ref:DI ("*.LLC0"))) -1 (nil)
(nil))

Run in 64-bit mode when using 32 bit plug-ins?

I have noticed that when I open a project that uses Komplete 7 Elements, a 32-bit bridge utility loads and an error message indicating that the file could not be opened pops up. However, the file project does open. My question is this: Does using 32-bit plug-ins affect performance when Logic runs in 64-bit mode?

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

A site I use every day told me today that it would only open in 32-bit mode. I cannot change this in system preferencees as suggested. Could anyone explain to me why suddenly, and how to change this? (MacBook Pro 10.6.8) Thanks!

Hi. I am in need of advice - and am not very IT savvy! I have a MacBook Pro 10.6.8 OS. A site I use every day told me today it would only open in 32-bit mode. I researched and found some advice on how to choose 32-bit mode in system preferences. I do not have that box to click in system preferences. Can anyone tell me as to why suddenly this has happened, and any suggestions on how to go back to 32-bit mode would be great! I did try restarting holding down the 3 & 2 keys as suggested too. No luck. Thanks for any help.

Does the site use 32-bit mode Java? If that's the case, you should have both 32 and 64-bit enabled though Java Preferences in your Utilities folder:
See what you have enabled...
Clinton

Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

Not all plugins support 64 bit and if not then you need to start Firefox in 32 bit mode to use that plugin.
# Close Firefox
# Start the Finder and open the Applications folder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select or Deselect "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox

Using Automator or Applescript to switch between 32 and 64-bit modes

I'd like to use applescript or automator to create something that would switch logic in and out of 64-bit mode (yes, I'm lazy). I've been fooling around with automator to no avail...anyone have any solutions?
Thanks in advance.

As a Launchbar devotee, it's pretty easy for me - to run Logic I hit command-space (to activate Launchbar) then "l" (lower case L) to select Logic and return to run it.
If I wanted to change mode I do command-space (activate Launchbar) l (to select Logic) then command-I to do a get info, untick the box and go.
None of this tedious open finder windows and locate the application bundle etc... I do a huge amount via Launchbar, it's about the quickest most efficient way of doing many things.
Not sure about Applescripts, my guess is it would be quite clunky and slower than the way I do it...

When I start firefox 4 on my mac osx 10.6.7 says requires plug in as run on 32 bit mode can I instal this plug in. Firefox does restart using 32 bit mode when I clock on restart using 32 bit mode ?

Want to start using firefox 4 without the need to ask it to run in 32 bit mode

Found the steps here...seems to work so far...
http://alexsantidote.com/535/start-firefox-4-in-32-bit-mode-for-less-ram-usage/
Have a great one!

Using snow leopard and can't get it to stay in 32 bit mode so I can watch movies on Netflix

Anyone know how to get Snow Leopard to stay in 32 bit mode so I can watch movies on Netflix? I tried holding down the 3 and 2 on startup and it doesn't work.

Hello mlbeverly
Try setting the kernel in terminal by following the steps below if you want it to start in 32-bit mode.
OS X: Starting up with the 32-bit or 64-bit kernel
http://support.apple.com/kb/HT3773
Regards,
-Norm G.

Possible to tell compiler to use 64bit pointer when using 32 bit mode?

Hey everyone,
Is there a way to tell the compiler that a pointer will be 64 bits when compiling in 32 bit mode, like with a pragma of somesort? On Alpha, OpenVMS, there is a way to do it, just wondering if this existed on forte/unix.

There are no 64-bit pointers in 32-bit Solaris, and the process address space is limited to 32 bits.
The supported hardware (SPARC, x86, Opteron) does not provide 64-bit pointers in 32-bit mode. (That is, you cannot dereference a 64-bit value in 32-bit mode.)
Sun compilers therefore do not provide a way to create a 64-bit pointer in 32-bit mode.

Using LE 9 in 64 bit mode

Similar Messages

Maybe you are looking for