Using less compression

I have an HDV project that's 16:36. I compressed it using the HDV 1080i option. It resulted in a .mov file that's 3.31 GB. It looks great.
For DVD use, I chose the Best Quality Under 90 Minutes option. That choice compressed the project down to 769 MB for video and 24 MB for audio. That's huge difference, and it resulted in a DVD with noticeably poor quality.
Is there another option for compressing for DVD that will give me a larger/better quality file that will be compatible with DVD SP?

It sounds as though you completely misunderstand the process.
You seem to have compressed your video twice!
The size of your project in FCP does not matter. It could be a hundred gigabytes and that would be no problem.
What does matter is the time. As long as it is no more than around 4 hours you are fine.
Getting back to the large file size of the FCP project, you do not compress it, but put it (full size) into Compressor, select a preset according to the length of your video and Compressor will compress your huge project down to around 4GB.

Similar Messages

What can I tune to make the database use less memory in a 1GB ram notebook?

Hi,
Our notebook has 1GB ram only, running Windows XP Pro, Oracle10g Database, Oracle9i Application Server. It consumes about 1.4 - 1.5GB ram where it's already start using the virtual memory, therefore have some performance issue with it especially when try to startup the services.
I'm not a DBA but I would like to get some advice on what and how can I tune the database to use less memory since the notebook is used for demo application only, so we save memory resource and make the notebook runs faster.
Please advise.
Thank you.

Application Server 10gR1, 10gR2 is certified against WinXP:
XP      10g (9.0.4.0.1)      N/A      Desupported       None       Yes      N/A
XP      10g (9.0.4)      N/A      Desupported      None      Yes      N/A
XP      10g (10.1.3.1.0)      N/A      Certified      Yes      None      None
XP SP2+      10g (10.1.3.0.0)      N/A      Certified      None      Yes      Yes
XP SP2      10g (10.1.2.0.2)      N/A      Certified      None      Yes      Yes
XP SP2      10g (10.1.2.0.1)      N/A      Certified      None      Yes      Yes
XP Xeon      10g (10.1.2.0.0)      N/A      Certified      None      Yes      Yes
XP      10g (10.1.2.0.0)      N/A      Certified      None      Yes      Yes
XP      9.0.3      N/A      Desupported      None      Yes      N/A
XP      9.0.2.0.1      N/A      Desupported      None      None      N/ADessupported means Oracle will no longer produce patches or provide maintenance for the version, so in case you hit some new bug the only alternative will be to work with a higher version.
In your case you could use 10g on XP. The only XP not supported is Home Edition.
Coming back to the issue, since 9iR2 Oracle recommendation is to provide 1G for each AS node (infrastructure and middle tier). If you have this on the same box, by itself on the Enterprise install will consume more than 1G.
Tuning 10g database won't make much difference. If you install AS 10gR2 it includes a 10gR1 Database as infrastructure database you could use for demo purposes.
~ Madrid.

How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
The way I do it, is I assign all my drum tracks to a buss, say buss 1.
Then, on buss 2, I assign it's INPUT to buss 1.
So buss 1 (all the drums) are feeding into buss 2 simultaneously.
Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

How do I move iTunes library to an external hard drive to use less space?

How do I move iTunes library to an external hard drive to use less space?

Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd. DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

Error message: 'Codec not found. You may be using a compression type without the corresponding hardware card' - then - 'Error. Out of memory'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

p.s. having looked at other posts, perhaps I am missing some (or all) of the relevant codecs?
In the folder Macintosh HD > Library > Quicktime
there is basically nothing. Do you think this is the problem?
If so, where do I download FCP codecs from?
Many thanks..

I buy Icloud on may 28, I can't back up since I purchase, it so use less

I buy Icloud on may 28, I can't back up since I purchase, it so use less, I try to contact apple suport but I don't have they email, I'm leaving in indonesia, hard to do contact with lng distance, and I never receive any itune invoce too, please advise me how to fix my problem.
Thanks

You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

How can I tweak firefox to use less of RAM?100MB+ is too much for my system.thanks

Ok,
I have latest updated version of firefox.
I have hp510 laptop with 1 GB of RAM.
My problem is that firefox is really good but uses too much of RAM(100 MB or more) while in usage.
How can I tweak firefox to use less RAM, as my system gets hammered.
Thank you.
Danny

thanks.
I opened my extensions, and all are disabled, except ADBLOCK.
I usually clean my history on weekly basis, sometimes even on daily basis.
When I use firefox, most of the time ther is no other application in use by me (I don't encounter all those back apps for the system).
Most of the time, I have only 2 windows open , very rare there more.
The issue is that even at starting of firefox session I can see in task manager there is minimum 95 MB or charge, without any work done by me.
I usually have charge about 370-390 MB of RAM, but when I open Firefox it gets me up to 500 or more.

Started using TOO much data with iPhone 4. Was using less then 200mg a month now using over 500 ...?

I was using less than 200mg a month. On WiFi alot. I updates some apps (like 30) and started using 500+ per month. ATT no help.

I looked around for more answers, found that people were having issues with iCloud updating during the middle of the night using the cellular 3g not wifi. I've turned off my cellular at home so it will only use wifi, and turn it back on only when I need it. I've also turned off the backup in icloud and will see how that goes. I also was told by an ATT&T support person to download an app called Onavo Count that will keep track of which apps are using the most data. Hope this helps.

My system cannot allocate enough colormap entry. How to set Firefox uses less colormap entry?

I have to use depth 8 and PseudoColor becuase a old program requests. If I run Firefox and my old program, I will get a error "Cannot allocate colormap entry for default background". Can I set Firefox to use less Colormap entry?
Nvidia 450
Thanks.
Jeff

Hello,
meanwhile i found a solution for way a) (JCo RFC Provider) in another thread.
Everything is ok so far in my coding above. BUT nowhere in Documentation i found a hint, that using Jco RFC Provider NOT works with EJB 3.0 but with EJB 2.1 !!!
For this i not only have to create the Local Interface which the Bean has to implement. I further have to create the EBJ 2.1 Interfaces as:
public interface FB_BESCHLAGPAKETLocalHome extends EJBLocalHome {
public com.dihug.kall.eel.FB_BESCHLAGPAKETLocalComponent create() throws javax.ejb.CreateException, java.rmi.RemoteException;
and
public interface FB_BESCHLAGPAKETLocalComponent extends EJBLocalObject {
public void processFunction (Function function);
Doing so, the RFC from Abap to Java works with JCo RFC-Provider
Unfortunatly i didn't found it in documentation that this EBJ 2.1 specific interfaces have to be declared even NW 7.11 is a JEE5 Server with EJB 3 Support and a developer on this plattform would normally go the EJB 3 Way.
Even though i now have a working solution it would be interesting how the JRA Way would go.
kind regards
Matthias

Hello. I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support

I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
How do I fix this?

That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
Regards.

How to Use Less Data on the Iphone 5, Thanks

Hi, I just got a Iphone 5 a few weeks ago and i was wondering how do I use less data. I already went over my data plan, I dont stream music or movies or anything i check my emails, go on facebook a few times a day and pinterest. thanks for your help.
JulieKate

Here are some tips from Apple:
http://support.apple.com/kb/HT4146

Use of compression & Aggregates

Hi All,
Please provide me the appropriate use of compression & aggresgates.
1. What is use of compression and how it relates to compression?
2. How to delete the data after doing compression?
3. How the aggregates improve the performance?
Regards
Dude

Hi Dude,
1. What is use of compression and how it relates to compression?
Ans: Usually we keep on loading the data to a data targets increases the number of requests in that particular data target. This will consume more database space and also effects the querry performance. To avoid these problems it is recommended
to compress the requests.
when we compress the requests all the requests will disappeared from the cube, shown as one request. Means all the requests are suppressed as one requst.
2. How to delete the data after doing compression?
Ans: hen we compress the requsts the data will be loaded to
E-Fact Table from F-Fact Table.
Once request is compressed we can not delete or modify a request. SO, before to perform compression we have to make sure taht no modifications are necessary. After compression if we reqired to delete data we can do so by doing "Selective Deletion"- Which we can perform form Performance Tab stip of Manage sceen of cube.
3. How the aggregates improve the performance?
Ans: when ever we load data to a cube will be maintained in
F-Fact Table. we will create aggregates to improve the query performance. when we perform Rollups the data in F-Fact Table will be loaded to E-Fact Table. Data in E-Fact Table will be stored in more organised format with proper indexing mechanism improves the querry performance.
I think it is clear... pls go through below links which may helps u..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04s/helpdata/en/10/244538780fc80de10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/c5/40813b680c250fe10000000a114084/frameset.htm
Regards,
Ramki.

Windows 10 TP - Build 9879 - WIMBoot incompatibilty - "Windows can't be installed because this PC uses a compressed operating system."

Ran into an issue installing the W10 TP today; currently using a laptop who's manufacturer load up windows 8.1 using WIMBoot to save space on the SSD.
Because of WIMBoot, the W10 installer detects that "Windows can't be installed because this PC uses a compressed operating system."
This means that, short of redoing my Windows Install from scratch, I have no way to install the W10 TP, either through the ISO or through Windows Update.
Any chance that this will possible in a future build?

Wimboot needs an image file, that HP uses with Windows8.1 + Bing on
Stream 7 tablet & HP stream laptops11.6" & 13.3"
Hp turned windows 8.1 into image file for using 32gb sd storage
windows 10 until finalised will not be an image file
bye retired techie
This is quite unhelpful, as I am in the same boat on an HP Stream 11, and many others are in this boat as well
According to the System Requirements page for the latest technical preview, Windows 10 is unsupported on
all 16GB WIMBoot devices, but only incompatible on
some 32GB WIMBoot devices, thus seeming to imply that some WIMBoot devices are indeed compatible.
The question is, why are some WIMBoot devices upgrade compatible while others are not? And is it possible to work around this limitation while retaining the WIMBoot configuration and user data, as an option for advanced users?
Furthermore, Windows 10is an image file (install.wim is what's used to install, refresh, and restore Windows). WIMBoot devices, from my understanding, use the install.wim (which currently contain the Windows 8.1 OS) in
a read-only mode, only applying updates and changes as files on the C: drive (so any updated files are located on C: and the originals within install.wim ignored?). Problem is, there has yet to be any explanation from Microsoft, for OEMs or consumers,
on how WIMBoot devices are to be upgraded in the future, as WIMBoot was only introduced with Windows 8.1, and so there hasn't been any major consumer releases of Windows that these devices would upgrade to.

"Windows can't be installed because this PC uses a compressed operating system"... on an ASUS Zenbook 303LA??

Hi folks,
I've seen a few threads about this WIMBoot issue installing Windows 10 TP on devices with smaller drives (under 32 GB), but I just bought a brand new ASUS Zenbook 303LA with 128 GB, and I'm getting the same error.
Is it not possible to install the W10 TP on any drives with WIMBoot, regardless of size? Has anyone run into this problem, or can anyone think of any other reasons why the install wouldn't work?
(Side note: there's no disc drive for creating a DVD to boot from, and I don't have a USB larger than 2 GB, so that's out too)
Thanks in advance.

Hi folks,
I've seen a few threads about this WIMBoot issue installing Windows 10 TP on devices with smaller drives (under 32 GB), but I just bought a brand new ASUS Zenbook 303LA with 128 GB, and I'm getting the same error.
Is it not possible to install the W10 TP on any drives with WIMBoot, regardless of size? Has anyone run into this problem, or can anyone think of any other reasons why the install wouldn't work?
(Side note: there's no disc drive for creating a DVD to boot from, and I don't have a USB larger than 2 GB, so that's out too)
Thanks in advance.
It could be too late to tell you this......
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/cant-install-windows-10-pc-uses-a-compressed/f5e6863a-51ab-4dee-922f-a5885f07b056?page=1
It can be done by downloading the ISO and use it to install.
See answer given by
Andre Da Costa

Using less compression

Similar Messages

Maybe you are looking for