Using Lightroom on a new hard drive

I've just had a new hard drive installed in my mac which I will use to import pictures onto (as well as load then onto an external hard drive)
As my version of Lightroom 3 is on the old hard drive, do I need to install it onto the new hard drive to get optimum speed and performance while using Lightroom ( I had the new hard drive installed and extra ram added to create more space and speed up performance)
If so, how to I re install the program (I bought the program online) ?
I hope this makes sense,
Many thanks
Neil

If it is an extra drive, then you need do nothing other than use it, although you may wish to move your catalog onto the drive.
If you have actually replaced the drive with the OS on it, then you will need to reinstall all your applications including LR. Just download the latest version from Adobe and use your serial number once installed.

Similar Messages

  • Restore using Time Machine to new hard drive, but last "full" backup was 2012.  how do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?

    Restore using Time Machine to new hard drive, but last "full" backup was in 2012.  How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user? 
    I entered Iphoto for my user and only photo up until 2012 were in the library.  I thought the restore would do the incremental Time Machine backups too.....
    Running 10.8.2

    It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • How to use recovery dvd on new hard drive, install window 7

    hello, i have trouble with my laptop. my hard drive got bad sectors and now i need to replace my hdd to new one. im not sure how to reinstall window 7 on my new hdd.
    is it possible to install operating system on new hard drive using recovery disk? and how?

    Hi,
    Yes, recovery discs will work on a new hard drive, but it's generally best to ensure that the replacement drive is of the same capacity ( slightly larger is Ok ) as the original - recovery discs can have issue when used on a drive that has a smaller capacity than the original.
    When you have replaced the HDD, all you need to do is as follows.
    Tap away at the esc key as you start the notebook to enter the Start-up Menu. 
    Insert the 1st Recovery Disc. 
    Select Boot options ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter.  You may also get a prompt to 'Press any key to continue' - do this if asked.
    You will be prompted to insert subsequent discs as required.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can I order a recovery disc for my HPG72 259WM and use it on the new hard drive?

    My hard drive crashed on my G72 259WM and I did not have a recovery disc.  If I order a recovery disc can I load that on my new hard drive to get my computer up and going?
    This question was solved.
    View Solution.

    Hi
    Yes you may order the Recovery disc and install it on your new Hard drive you have two option to order the disc either you could call HP Technical support and order the disc or you can click on the link given below to order the part.
    Order Recovery Discs for Windows 7, Vista, or XP
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HT1386 using iPod nano with new hard drive after original crashed

    My PC hard drive died. My iPod hasa bunch of music on it. I reloaded iTunes on my new drive. Now I can't load any music from iTunes to my iPod without erasing my current content. How do I fix this?

    Transfer iTunes purchases by:
    http://support.apple.com/kb/HT1848?viewlocale=en_USiTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer othre music by using a third-party program like one of those discussed here:
    Copy music
    - To retain app data and other information, connect the iPod to yur computer and make a backup by right clciking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the Backup that iTunes makes does not include synced media like apps and music.

  • Help.......I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS

    I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS.  In the collections i get the messageI then locate the file in the new drive :
    i locate the file and receive this message
    How can i get the Collection to redirect to the new location??   I have about  a LOT of missing pics in Collections. 
    Thank you!  Jamie

    Thank your for responding.......
    To clarify....I moved LIGHTROOM to a new hard drive....including 1) Working catalogs, 2) Working exports, and 3) Working Originals.  I now know i did not follow correct procedure for "moving a catalog".  I dragged  it to the new hard drive. Yikes!!
    (I was at Imaging last week and spoke to Julianne Kost, she recommended that i use the FIND link....but this gave me the same result as i am speaking about above.)
    To Clarify......The Collections are listed. The target path to the images did not change when i moved to the new hard drive.
    There is an exclamation point in the right hand corner of the images in each collection.  When i click on the exclamation mark i get the message....."“JK_120214_7782.NEF” could not be used because the original file could not be found. Would you like to locate it?"  I then locate the file IN THE NEW current DRIVE...at which time i click on it and i receive the message.....
    this file is associated with another photo in the catalog.... each file can only be associated with one photo.  Then if i choose to show in library....it points to the image in the FOLDER  tab...which is in fact where the image is located. 
    Up to this point, when i need one of these older collections i have had to recreate.  i have manually gone to the original.....in the FOLDER tab, found the image and added to the Collections again.  Then i go back and delete all the files with the ! ......a long and tedious task.  I was hoping there was an easier way to recreate my "collections".
    Initially i was going to just MOVE the entire library again ( the correct way) ....which i should've done i believe.  Now i have imported more jobs and have created additional collections , so i'd love to find a short cut!
    I hope this is a bit more clear!!
    Thank you.

  • New hard drive and photoshop license problem

    I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
    The hard drive in this computer failed, and it has been replaced.  I used an image backup from Acronis True Image 10 to "restore" the new disk.
    Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
    I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
    I didn't find any helpful info on the "Product Activation" web page.
    I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
    The only relevant item I could find is this:
    "Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
    So does that mean I have to "reactivate" Photoshop CS2?  If so, do I use the Activation window that is displayed when I open Photoshop?  The serial number has 20 characters.  Will the Adobe (re)activation recognize this old serial number?  If not, what do I have to do to get this product usable again?
    Please help.

    >replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
    Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
    I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
    But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

  • Mavericks will not install on brand new Hard Drive

    Trying to install Mavericks to a brand new internal 2TB Samsung SATA 3.0 HD on a 3-yr old 12 Core Mac Pro system that was running Mnt Lion just fine. After multiple failures upgrading the Mnt Lion disk to Mavericks. Decided to just use a brand spankin' new hard drive and do a clean install of Mavericks. Now during the install to the NEW DRIVE, getting error message "Mavericks cannot be installed." Then I reboot and try to force the continuation of the install, doing this repeatedly, and I sometimes get a error log instead of a just an error message. Error log says: Thread 34 Crashed:: Dispatch queue: com.apple.root.high-priority.  Then the 1st line listed under that is: 0 libsystem_platform.dylib  0x000000010fa5a06a _platform_memmove$VARIANT$Nehalem + 138. If anybody knows what any of that means?
    Thanks.

    Without the full listing of the trace I can't be sure, however it would look more like a bonafide logic board or memory error rather than the HD that's causing  the problem. The low level drivers on Mavericks have obviously changed (otherwise it wouldn't be a different OS version) and possibly they're exposing a lack of performance in your memory. The actual Mavericks install may not be the problem, but rather being corrupted during installation. In the line you quoted, Nehalem is the Intel name for your CPU, the memmove operation failed (move blocks of memory contents from point A to point B) and they shared library containing this was in the system library....sort of critical stuff.
    You could try the following:
    Re-seat the RAM and try again.
    Try an old OS installation and see if it succeeds (Snow Leopard, Lion, Mountain Lion, etc)
    Try an install to an external enclosure
    If re-seating the RAM does the trick, then you're set.
    If it doesn't, then install an older OS to see if they work OK. If older OSes work OK using the internal drive and you have after market memory in the system, it would imply to me that the memory probably isn't quite up to snuff and Mavericks is exposing it. If it's original memory then it should be OK.
    If the older OSes now don't install correctly and it's giving similar problems try doing the install in an external enclosure. The point here being to try to move your data path off the internal SATA cable. If these install OK, try it with Mavericks. If any of these work it could be the SATA cable or I/O controllers on the logic board (SATA cable most likely).  A good reference for these sorts of problems is:
    Bad Hard Drive Signs and Symptoms
    Possibly a last option, which I would think (or hope) would be rare, would be that the binary for Mavericks install got corrupt during download. You could also try some of the resets they have in the linked document above. They might work and it doesn't take any effort.
    Good Luck

  • Download Lightroom on New Hard Drive Win 7 64 Bit Error Can't Use Original Serial Number

    Hello
    I am attempting to reinstall Lightroom 5 on a new hard drive after my old one crashed.
    I am using the original download file which I have recovered from the old hard drive.
    When entering my serial number for Lightroom I am receiving a message saying "This is an upgrade serial number.  The serial number from your previous version of Lightroom is required."
    I did not upgrade from an earlier version of Lightroom; I purchased the full version of Lightroom 5 and I only have one serial number.  I was wondering if you knew what the problem might be here.
    Thanks

    Hi Davidbopper,
    The full version serial number should not throw up this message.
    I would request you to go through the link below and check in case you might have purchased any previous version serial key.
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Regards,
    Anand

  • I imported photos as cat to new hard drive. Using "find" lightroom 5 can't see any photos that are PSD, how can I fix?

    I imported photos as cat to new hard drive. Using "find" lightroom 5 can't see any photos that are PSD, how can I fix?  I can see them in the folder using windows explorer.

    This is the first time I've asked a question using the forum.  Is my question understandable?

  • My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

    My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

    If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
    Or you could move them to the internal drive and double-click on them once the move is completed.
    To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

  • Do I need a new hard drive & can I use Leopard?

    I have a PowerBook G4 17" 1.5Ghz with OS X 10.3.9 on the original 80GB hard drive, I've been getting a lot of problems with the computer acting very slowly and getting 'hung up' with the color wheel spinning endlessly, during which nothing responds, I can't force quit, the only thing I can do is force a shut by holding down the power key. Sometimes it takes a long time to start up. I've tried re-installing the OS but still the same problems. I ran the Apple Hardware Test which gave this error code "2STF/4/3:ATA-100 ata-6-MASTER".
    Does this all mean that my hard drive is going down and I need a new one?
    Can I use any size hard drive e.g. a 250GB one?
    Also - If I put a new hard drive in can I then install Leopard?
    All info received with many thanks.

    Welcome to the Apple discussions.
    That code means there are problems with your hard drive. If you look at Disk utility (on your hard disk in applications/utilities) you may see that the S.M.A.R.T. status shows a problem. Or if you have SMARTreporter installed, it may not be green.
    You can certainly use up to a 160GB hard drive. There was a discussion recently suggesting a BIOS (basic input output services) limit to 160GB ... I don't know if that's real or not.
    If you do replace your hard drive, you might consider the slight price premium for a 7200rpm drive. You'll appreciate the extra snapiness in response time. And yes, you can install Leopard on it. After installing the new hard drive, boot from the DVD drive and use disk utility to format the hard drive in mac os extended (journaled) format. Then you can install Leopard.

  • Restoration of Lenovo T500 to new hard drive using Rescue & Recovery

    I bought a new hard drive and I have been having a frustrating time trying to migrate the image of my hard disk to the new drive. When I bought my T500, it came with Windows Vista Business 64, but I have since downgraded it to Windows XP Pro.
    Up to now, I was faithfully using Norton Ghost 14 to back up my drive to my USB Western Digital MyBook Mirror Edition 1TB drive. However, I get errors when I try to restore the image to my new drive (and I will be posting that issue to Norton's forum).
    While I have not completely given up on Norton Ghost, I decided I might be able to restore the image using the Rescue & Recovery software. I downloaded and installed R&R 4.21.0016.00. After I installed it, I backed up my system to the MyBook Mirror Edition.
    I then shut down the computer and put in the new hard drive (a Western Digital Scorpio Black WD5000BEKT). I used a disc that I burned from the ThinkVantage Create Recovery Media utility to boot the machine. While the environment loads just fine, it does not detect my USB hard drive. NOTE: I didn't make my USB drive bootable, I only stored the backup files there.
    I tried going into the PC Doctor utility and discovered that there is an "unidentified" USB device under the mouse section, which I presume is the MyBook.
    I have hunted high and low for an answer to this both on Lenovo and Western Digital's web sites, but I can't seem to come up with a reason why my drive is not visible to R&R, or a way to load the WD drivers into this recovery environment. I found http://forum.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-does-not-recognize-USB-driv..., and I followed the instructions - there is a minus sign next to the USB boot device in the bios. However, saving the bios and rebooting the computer (as the post suggested) does nothing to change that setting.
    I have tried upgrading the bios to the latest version, but still no luck detecting the USB drive.
    I am thinking about resorting to buring a backup of my entire system to DVDs and then restoring using the DVD drive. However, since my current backup is 60GB, I imagine that will take 15 discs.
    Whether that fixes my immediate problem or not (that is, transferring to my new drive), I still don't have an answer for a long term solution in case of hard drive failure. Ghost is not working with my current configuration. And if I use R&R for backup, it will do me no good if I cannot get it to connect to my USB drive to recover. Furthermore, as far as I can tell there is no way to burn an existing restoration point to DVD - meaning I would have absolutely no way to restore if my hard drive failed.
    I have been working on this migration for 3 full days already, and since I had my system images backed up I thought that this would be a trivial task. Any suggestions at this point would be welcomed.

    I'm experiencing the same problem. I wanted to restore single files from an USB disk. Two larger file (500MB each) went through that process quite fast (3 minutes). A folder with many small files takes forever.
    What's strange is that my notebook hard drive is at 100% activity all the time, while the USB disk is hardly read.
    Message Edited by gerik on 10-29-2008 02:33 PM

  • I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

    I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
    Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

    The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
    Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
    In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
    If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • When I try to get the key code for office it tells me its already been used.  My mac had a new hard drive in its first year, could it be because of this?  How can I get the office I've paid for but never used?

    My mac had to have a new hard drive in its first year.  Now, when I try to get the key code for office it tells me its already been used.  How do i get the office I've paid for but never used?

    The product key is sent to you by email as part of the purchase confirmation.
    If you have lost it, log into your Microsoft account.

Maybe you are looking for