Using Lightroom to control camera remotely

Hello:
I want to setup my camera, Nikon D5100, for pole aerial photography.  I want to have the ability to connect my laptop to the camera up on the pole so I can adjust zoom, etc. 
Can I achieve this with Lightroom?
Thanks in advance.

Helen,
Look on this website for instructions. I read one place on the web that LR 3.5 (but no earlier version) supports your camera for tethering, but the Adobe site doesn't show it in the list, so it might not work for you.
Make sure your camera is in P2P mode, not Mass Storage. Go to File/Tethered Capture/Start Tethered Capture.
Hal

Similar Messages

  • How to use headphones as iPhone camera remote

    How do I use my headphones as iPhone camera remote.

    You simply plug your headphones into the device, then launch the camera app. Once you've got your shot set up, press the volume up or down buttons on your headphones.

  • Using "Signal" to control iTunes Remotely

    Hi all,
    The new 802.11n Airport Express has got me thinking about streaming my iTunes library to my living-room stereo and using my iPhone as an iTunes "remote control." I see there's a program called "Signal" that enables this http://www.alloysoft.com
    Has anyone used this program? Any thoughts? Any security concerns? Is it crap or does it work as advertised? Also, it's 25 bucks, which is a bit steep. Is there a comparable program that will do it for less?
    Any advice would be appreciated.
    Thanks,
    Chip

    Helen,
    Look on this website for instructions. I read one place on the web that LR 3.5 (but no earlier version) supports your camera for tethering, but the Adobe site doesn't show it in the list, so it might not work for you.
    Make sure your camera is in P2P mode, not Mass Storage. Go to File/Tethered Capture/Start Tethered Capture.
    Hal

  • Anyone use Lightroom with Reconyx cameras?

    I just bought a Reconyx Pro 90HO and when I import images into LR 1.4 it crashes. I was able to import some, then later on reopening LR, it crashed again. I had to open LR and REALLY fast delete all the Reconyx photos and it's fine now so clearly something about those images (jpegs) screws it up. When it did import, many files are listed as unsupported or corrupted until I click on them and then they appear in the Library window, but it still usually crashes the program. I'm wondering whether it has anything to do with how they attach the metadata to their images. The folks at Reconyx aren't familiar with Lightroom - they're suggesting finding a program to strip the metadata out of the pics which I'd rather not do so I'm hoping there's some other solution.

    The latest version of LR is 2.6, available for a 30-day trial from this link. You could install it and see if your images work better with that version. If so, you can decide whether to spend the $99 to upgrade.
    Hal

  • How can I use a iPhone as a remote intervalometer/web camera?

    Hey everyone.. got a question to throw out there and hopefully greater minds than mine will come up with an answer!
    I'm part of a model aircraft flying club and our airstrips/fields are quite isolated and remote... we have no mains electric power or telephone land-lines. What i'm after is a solution to getting a series of still images (snap-shots) of the clubs airfield on to the clubs website... remotely. I know there are a few apps out there that will allow a iPhone to be used as a remote camera, and you then log into a website to view the images, but all seem to fall short on some specific critera I require. Like I said, the clubs club-house (shipping container) as no power, so the phone will have to be eventually powered from a larger battery source... like a mobile-home leisure battery, and then conected to the internet using either a data-only sim card in the phone or using a mifi... that bit is sorted! What is the problem I so need help with is; I need to set the iPhone to shoot stills only, say at a rate of 1 image every 15 mins and then upload them to a web server/website, also only to take the pics between set times of the day... afterall it's pointless taking pics in the dark, and also that'll use up data. I've had a look at apps such as 'Manything' and 'Presence' and also done a trawl on the web to see if a solution is available, but i've drawn a blank so far.
    Any body able to help?

    If you are referring to an Apple TV or iTunes remote control then download the "Remote" app from the app store.
    If you are referring to a remote control for your TV, Cable box, DVD Player etc then you cannot use your iPhone as a remote for these things unless they are wifi connected and have a remote control app on the app store.

  • I was using Lightroom v5.6 when a notice came up to update to v5.7.  I did the down load but must have gotten a bad down load because it will not install.   And the old 5.6 on my desktop will not work.   So no 5.6 or 5.7 . any ideas  how to get something

    I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install.  And the 5.6 version will not work now either.   So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech.   Any help will be appreciated.

    My iPod is a click wheel...I think that's fifth generation?
    I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
    I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

  • A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    Setup for remote app: http://support.apple.com/kb/ht1947
    Specifically:
    Set up Apple TV (2nd and 3rd generation)
    On Apple TV, select Settings from the main menu.
    Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
    Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV.  If  you connect your Apple TV to your iTunes library using  Home  Sharing, you can use Remote to browse and play content from any  iTunes library in the Computers   section of your Apple TV. You can also  use Remote to select  between available speakers to enhance  your  audio and video experience.

  • How can I use my Iphone as a remote control?

    How can I use my Iphone 6 as a remote control?

    If you are referring to an Apple TV or iTunes remote control then download the "Remote" app from the app store.
    If you are referring to a remote control for your TV, Cable box, DVD Player etc then you cannot use your iPhone as a remote for these things unless they are wifi connected and have a remote control app on the app store.

  • I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

    I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

    We'll know when it happens, Lucht - software companies don't make support promises in advance.

  • My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

    Any ideas?

    My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

  • I am using Lightroom 4.4,  I recently downloaded the latest Camera Raw update, 8.8.  Will it work with LR 4.4?

    I recently downloaded the most recent Camera Raw update, 8.8.  Will it work with LR 4.4?  My current Camera Raw plug-in does not recognize my new Canon 100-400mm lens.

    Quote "I have downloaded the most recent DNG converter. I guess I was mistaken in thinking I could use this as a plug-in with LR.  If I understand correctly, I need to convert image files taken with the new lens with the DNG converter and then load them in LR 4 in order to use the Lens Correction feature in LR.  Does that sound correct?"
    No, as far as I am aware the only function that the DNG Converter performs is to convert the raw files from a supported digital camera model to a DNG file format.
    This will allow you to work with the DNG files in earlier versions of Lightroom or Adobe Camera Raw that do not provide support for the particular camera model raw files. It has nothing to do with Lens profiles. 

  • In order to tether a Nikon D7100 into Lightroom is Nikon Camera Control Pro 2 required

    I have a Nikon D7100 and I have Lightoom 5.  Will Lightroom recognize the D7100 without needing to have Nikon Camera Control Pro 2?  If the D7100 is not yet recognized by Lightroom will the Nikon software allow for tethering into Lightoom?  when might Adobe add the D7100 to recognized cameras"

    No.
    The D7100 is not supported for tethering in Lr.
    See here: http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

  • Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

    Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

    Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
    Make sure your video driver is up to date.
    If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

  • When I use lightroom mobile it does not show all the photos in my camera roll.  I have 57 and it only shows 32

    WHen I use lightroom mobile  I have 57 photos on my iphone . I transfer them to my ipad and then I try to put them in Lightroom mobile from my ipad camera roll and only 32 show and transfer

    Same problem here, and with even fewer photos. There should be 14 photos (per the LR collection info), but when I view on my iPhone (5s), only 11 appear. They do all appear on my computer.  I've tried the following to make it work on my phone:
    Creating a new collection and importing there. It says one photo is in the collection, but none actually appear.
    Completely shutting down and rebooting the iPhone.
    Deleting and re-downloaded the app.
    None of these have worked.

  • 1 pc two camera's direct RAW pictures using Lightroom

    I want to install 1 pc and connect two camera's to make direct RAW pictures with both camera's working one after the other!Is this possible?
    On the pc i want to install Lightroom and use two screens.
    Can somebody tell me if this is possible?
    Thanks in advance

    Hello,
    The problem is that i have 2 identical cameras Nikon D7100. Windows OS sees 2 different cameras but lightroom only sees Nikon D7100. I do not know where I can change the name of a camera.??
    Thanks in advance.
    Regards,
    Gerard
    Van: 99jon
    Verzonden: dinsdag 13 januari 2015 11:15
    Aan: Gerard Lurvink
    Onderwerp:  1 pc two camera's direct RAW pictures using Lightroom
    1 pc two camera's direct RAW pictures using Lightroom
    created by 99jon<https://forums.adobe.com/people/99jon> in Lightroom for Beginners - View the full discussion<https://forums.adobe.com/message/7090743#7090743>

Maybe you are looking for

  • Start up app won't go away!

    I've had my iBook G4 for about a year, and I've never had one iota of a problem until more recently. At my college we were required to have Sophos anti-virus (or something like that) on all personal computers connected to the network, so they provide

  • Graph List Coloring

    Hi please can someone help me for this algorithm. The problem is the classic graph coloring with the condition: two adjacent nodes do not have the same color and any vertix has a list of admitted colors. thanks a lot

  • Interaction ESS - Webdynpro - Websphere portal

    Hi all, a question please if you can help me: Could Websphere Portal interact with ESS through the URL address of its WebDynpro pages ? do you know something about this argument ? I know that in the old version, it was easy for a non-SAP portal to wo

  • Cannot find the CMS server running on port 6400?

    Hi all, I can see all the servers running on bo xi 2 other than the CMS server. If i start running using Administorator nor through the windows administration it displays the message "Cannot find the CMS server running on port 6400?" Can anyone expla

  • NB200 running Windows XP - What's wrong with my USB ports?

    I bought a new NB200 recently and have had a problem with my USB ports ever since. Independently, both rhs ports operate fine with my Logitech wireless mouse - unless I attach it via a USB hub. When I use the second port to attach another device - in