Using Line 2/3 on Xenyx 502 Mixer with Garageband

I would like to be able to use the Line 2/3 on my Xenyx502 Mixer as backup means to using Skype for guests to call in on a low budget podcast show. I have a 1/4" Y adapter cable that will hook up to my iphone, the problem is whenever it is plugged in, Garagbend is recording through the iPhone mic instead of the mic that is plugged into the mixer. As soon as I disconnect the cable or phone Garageband goes back to recording through the mic. I am new to this and would appreciate any help.
Using a MacBook Air with Yosemite, Garageband 10.0.3
Xenyx 502 Mixer, UCA200 U-Control, Line In App/Software and Soundflower

Try to reset the network parameters.
Ryan Shi
National Instruments
Attachments:
SetNetworkParameters.JPG ‏1 KB

Similar Messages

  • How do I use beringer qx1002usb mixer with garageband

    I have a Beringer qx1002usb mixer that I would like to attach to use with garageband.
    When I plug it in it does not connect. Is there software that needs to be installed in order to use?
    Anyone who has used this mixer before  please help!!!

    I can pair the headphones with the computer but the sound from GB is distorted and muffled. I can barely hear it. The set works with iTunes, but not with GarageBand.

  • Trying to record a DJ mix with GarageBand?

    Hello and Happy new year !
    I am a mac beginner, I am also DJ and I would like to record my dj Mix
    I have plugged the special cable from my pionner mixer to my Line In on Mac
    then which programs shoud i use on garageband Loops or guitar ..Do I need to change something on the preference?
    nina

    ninajolly wrote:
    which programs shoud i use on garageband Loops or guitar
    Acoustic Instrument
    ..Do I need to change something on the preference?
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can I use Radium 49 on Mac OS 10.9 with Garageband?

    I've inherited some equipment I'm unfamilar with and have installed everything as recommended (MIDI_USB_OSX_3_4_0.dmg and Audiophile_USB_OSX_1_8_1.dmg) and am getting the following start up message: Insecure Startup Item disabled. “/Library/StartupItems/MAudioOzone” has not been started because it does not have the proper security settings.
    When trying to change the Sound preferences only default options are available.
    I can't find anywhere to view/change any MIDI settings.
    When I try to open the M-Audio Zone preferences panel I get the following error: Preferences Error. Could not load M-Audio Ozone preference pane.
    Can any body please shed some light as I've read that it's not compatible with latest OS and also read it works just fine?
    Thanks. Meg

    Meg81 error 214 indicates a download data validation error.  This means that the update you downloaded became corrupted likely during the download process.  I would recommend utilizing the suggestions listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to attempt to improve the stability of your Internet connection.
    You can also find information on how to review your download logs which may provide additional information regarding the failure of the download.

  • Problem Using Zoom H4 as an Audio Interface with Garageband

    I'm new to GB and I am having problems getting started using my Zoom H4 as an Audio Interface with Garageband on my iMAC.
    I'm fairly certain that I have the connection and all of the setting configurations correct, and yet I cannot get any sound from the H4 into GB.
    I do see the sound volume registering in the Input Level window of the H4, but not in GB.
    Here is what I see in my Garageband:
    Preferences >
    Audio/MIDI >
    - System Setting
    - Built-in Microphone
    - Built-in Input
    - H4 Audio IN (when H4 is connected to the iMAC via USB)
    Of course I have selected the H4.
    Any help or insight would be greatly appreciated. Operators standing by!

    I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
    Did you choose the H4 input channel in the track info?

  • Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

    hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

    Friedrich sp wrote:
    Can you send me a mixer wich can do that, please ?
    Who do you think I am? Santa Claus?
    What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
    Roland UA 1010
    Focusrite Scarlett 18i8
    However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
    The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

  • I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

    I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

    Eric,
    Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
    The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
    I'm trying to record the sound from the DVD not rip the track.
    When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
    I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

  • Using an Analogue mixing desk with garageband?

    Hi guys,
    As you can tell i'm really not a techie!
    I'm looking to use a mixing desk with garageband, it's analogue and i have the new macbook pro retina, but I don't know how i could connect it to my mac. I need it for recording demos, but firstly will it be compatible? I dont wanna have to spend £90 on a pricey iRig when i already have a perfectly good Roland vs1680 sat here. Also, would I be able to use it to convert my guitar sound and output MIDI synthesised sounds from my mac to my Line 6 Amplifier?
    Any help is appreciated,
    Blake

    unfortunately I do not have a second mac (g5 or otherwise as I sold it when I bought new one lol) to try this method. I did notice m-audio had updated there drivers for osx 10.4 but unfortunately these drivers only work for g5/g4/g3 mac and not for the intel mac keyboards so at the moment I do not have a workaround for this problem. I have emailed m-audio and asked for a timeframe for drivers but have not received a response yet so at the moment I am unaware of any usb midi keyboard that works natively for a intel mac which is rather tragic lol as garageband is basically unuseable without a method of inputting midi but hopefully someone will prove me wrong and suggest a solution. On another issue my usb keyboard and mouse had the freezing problem that seems quite common but after a lengthy phonecall to apple I asked for a replacement wireless bluetooth keyboard and mouse which I have received and can report works absolutely perfectly so there may have been a bad batch of usb keyboard/mouse combinations made. Otherwise everything is working perfectly and I am delighted with the new imac

  • A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

    A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.  I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name.  I have also deleted the account entirely from my address book.  I have have run repair permissions and also full defrag in iDefrag.  Still the problem persists.  Any suggestions?

    Hello CarolineLongEaton,
    I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
    If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
    https://discussions.apple.com/thread/6116927
    If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
    dofromon

  • I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?

    I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
    I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
    I can't do this with the IDT codecs supplied.

    Hey Redritr,
    Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
    When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
    via iTunes Store: How iTunes Store purchases are billed
    http://support.apple.com/kb/HT5582
    It also may be that the iTunes Store is prompting to verify your billing information:
    When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
    In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
    via iTunes Store: My credit card's security code or zip code does not match my bank's records
    http://support.apple.com/kb/TS1646
    Additional Information:
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/TS5366
    Thanks,
    Matt M.

  • I am trying to cut and paste from a program, IEP DIRECT, and normally on my PC I have no problems; however, when using my MAC the formatting gets all mixed up

    i am trying to cut and paste from a program, IEP DIRECT, and normally on my PC I have no problems; however, when using my MAC the formatting gets all mixed up

    If you refer to this
    https://www.iepdirect.com/iepdotnet/hub/index.html
    then they have an issue with mac version.
    At a first glance, their website is optimized for Windows only, it displays badly in Safari, perhaps it would be better in Firefox or other browser.

  • Using Line Item Dimension

    Hello Guru’s
    We have finished all initial loads to BW and now we are facing problems during the segmentation in CRM, using queries from BW.
    SAP consultants indicated to use “Line Item dimension”.
    Can we do it now? It is possible now to flag “line item” after the initial load?
    We made the aggregation/compression and our problem still the same.
    Thanks a lot!
    Cristina Barbosa

    Dear  Bhanu Gupta,
    I´m CRM consultant and I´m not a BW expert, but I need to finish this project.
    I read about Line item and my quastion is:
    You wrote me we cannot use line item now.
    Can we insert severeal characteristics in normal dimension?
    It will be helpful? In other words, this can increase the performance as line item?
    We can´t delete the data in the cube.
    In one of this cube, we have more than 40 millions facts.
    Is there something else we can to to improve the performance?
    Thanks for your help and patience.
    Cristina

  • I have Iphone5, i make video calls using line program, i want know video calls is safe or anybody can see my video call??

    i have Iphone5, i make video calls using line program, i want know video calls is safe or anybody can see my video call??
    some friends told me that there is hackers can have all my data, photos, videos, listen and record my voice and video calls. is this right?

    some friends told me that there is hackers can have all my data, photos, videos, listen and record my voice and video calls. is this right?
    Not on an Apple device, no.
    Things are not the way popular movies and TV shows would have one believe.
    Apple goes to extremes to ensure your personal information remains protected, to a far greater extent than any other consumer product manufacturer on Earth.
    Your FaceTime videos, Messages, and everything else you do with your iPhone are as secure as your iCloud credentials.
    Anyone with your iCloud or Apple ID credentials has complete and unfettered access to everything associated with them, equal to that of your own, so keep them secure. Never divulge them to anyone you would not trust equally with your wallet, your girlfriend / boyfriend / spouse / child / Lamborghini etc.

  • Spacing between characters too large when using line justification !!!!

    Dear friends,
    Since the first time when I have used Pages I noticed a somewhat annoying feature: Sometimes when I use line justification (left and right) the spacing between the characters increase substantially. Sometimes the spacing is ridiculously large. I guess that I have mad something wrong, but I do not know what. Can someone give me a hint what I should do to overcome this irritating aspect?!
    Thanks in advance
    LJ

    There is no doubt that Mellel is a much better application than Pages in a lot of areas. It has been around for longer, it is more mature and it is actively maintained. Pages is of course better in a lot of other areas - and there is room for both on the market.
    Mellel handles hyphenation in a much more advanced way than Pages and it has support for example for soft-hyphens, editable hyphenation dictionaries and hyphenation zones - something Pages lacks.
    When it comes to the large space between characters, however, I cannot say that Mellel has invested a lot in making it look good. They just chose the simplest solution, just like MS Word, to increase space between words - not between characters. They even use this as an example of something ugly in Mellel's own user guide: "For example, the following text is fully justified but not hyphenated. The spaces between the words look wide and make the text look quite ugly."
    As mentioned before, in some cases increasing space between words is the most pleasing solution to the eye. In some cases adding some space between characters is more pleasing, and that is the reason why Apple went to the extra trouble of adding that functionality. In many cases, it is not obvious which way is best, and people will have diverging opinions.

  • No sound using stereo mixer with speaker balance s...

    No sound using stereo mixer with speaker balance set between approx 95-100% of max to the right
    Setup: good quality functional soundcard, fine when audio not routed via Skype, mixer enabled, Skype mic / audio auto disabled, issue present when tested using a variety of different systems, latest version of Skype was used on all machines being tested
    Issue: When the speaker balance is set approx 95% to 100% to the right speaker channel using the Windows audio control no sound is generated. The issue is absent when audio is not routed via Skype. This would seem to be a Skype bug and would like to report the issue as a bug. Has anyone else encoutered this issue? Is there a resolution?

    Yes, I restarted my computer yesterday and this morning all my sounds is controlled by the left/right blance percentage. 

Maybe you are looking for