Using Line Stretch With Frame Property

Hi Folks,
I'm using Report Builder (Developer 2000 ver 6.0) and in one particular report, I would like to have vertical lines between displayed columns from the table.
When I use the Layout Model and draw lines between the columns and use the Line Stretch With Frame Property of that particular line and choose the relevent frame, the line stretches with the number of records ( as I have reduced the number of records to 8 per page) only on pages from 2 onwards. On the first page the line does not stretches. Why is that?
Similarly I would like to draw a line at the end of each record on each page, but when I draw the line in the Layout Model, it is always displayed in the middle of records instead of the last record.
Thanks in advance
regards
Hassan

It's a hardware fault. I suggest you make a "Genius" appointment at an Apple Store to have it tested. It's a free service. The repair won't be free, but if it's something simple, such as a bad memory module, you may be able to fix it yourself.

Similar Messages

Does the 1422 grabber use line valid and frame valid signals

Hi,
Setup: I have set a camera (digital) to acquire a 200x200 image (Basla config software), and set the “channel->properties->Basic->Acquisition Window” values to 0,0,984,989 (in MAX); the camera is in free running mode at 20 fps.
The problem I have is trying to understand the returned image, i.e. when I acquire using SNAP I end up with multiple frames in the window. This leads me to believe that the 1422 does not use FVAL and LVAL lines. Is this so?
Thanks in advance

The 1422 does use both the FVAL and LVAL signals (or elso you would never get a frame). In order to only see one image, you need to change the acquisition window in MAX to be the same size as the image. In your case, you are telling MAX to acquire an image 985x990 while your actual image is only 200x200. Therefore, MAX will append lines onto the image until it reaches 985. That is why you are seeing multiple images. In MAX, set your acquistion size to 200x200 to solve the problem.
Hope this helps.
Jack Arnold
Application Engineer
National Instruments

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

How to use magic move with connection lines?

When I use magic move with connection lines, they disappear and reappear in the next slide. It seems like magic move doesn't recognize the connection lines (or can't match them), so it just redraws them, instead of leaving them there.
I'm trying to use magic move to make a nice presentation that includes connection lines. How can I make without the lines disappearing every time something moves?

Group the shapes and connection line together:
select the objects then Arrange > Group (alt Command G)

Is this how i control frame rate with IMAQdr property node?

Is this how i control frame rate with IMAQdr property node? if not, can someone point me in the right direction? for some reason, it doesnt work..
Attachments:
pic.JPG ‏75 KB

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

How can I use a vector image to stretch with the backgrounds in Muse master pages?

How can I use a vector image to stretch with the backgrounds in Muse master pages?

Maybe there's a bug. I think it's only showing it when it wants to because look:

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Hi, do you mean a real Dial-up Modem as in the old days?
As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
http://www.zoomtel.com/products/dial_up_external_usb.html
Or is the Modem on the other end Cable/DSL/FiberOptic?

As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line tht supoprts Iphone.

As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line that supports Iphone. So, is it possible that I can purchase an Iphone 5s that will be usable within Canada and Turkey? Im asking because, In Turkey, you need to register the Imei of the phone on your Passport to use it. Also, if i buy an unlocked Iphone 5s, will I be down to use it anywhere with any line?

I dont know if you know the procedure in Canada and Turkey. Wind mobile wasnt supporting Iphones until they decided to let people use Iphone 5s with their $40 plan.And as i know, Turkey is the only country that asks you to register the imei on your passport to use it. So, most of people did not know it. so procedures are changing country by country. Are you sure that If I buy an Iphone 5s from a canadian apple store, use it with my wind mobile line and the turkish line in Turkey?

Using Flash with Frames?

Is there a trick to using frames with flash? The frames page
looks like:
<html>
<head>
<title>Home Site</title>
</head>
<frameset rows="78,280,*" FRAMEBORDER=0 BORDER=0
FRAMESPACING=0>
<frame src="header.html" name="header" scrolling="no"
noresize>
<frame src="flash.html" name="flash" scrolling="no"
noresize target="mainFrame">
<frame src="frameindex.html" name="mainFrame">
<noframes>
<body>
<p>This page uses frames, but your browser doesn't
support them.</p>
</body>
</noframes>
</frameset>
</html>
header.html does not have any flash. Just has the home and
contact buttons for the top.
flash.html is just an html page that holds the flash
navigation.
mainFrame is where the new pages should display with index of
course being the first page.
In flash, the button has the following:
onClipEvent (load) {
num = 1;
on (rollOver) {
if (_root.link<>num) {
this.gotoAndPlay("s1");
on (releaseOutside, rollOut) {
if (_root.link<>num) {
this.gotoAndPlay("s2");
on (release) {
if (_root.link<>num) {
_parent["but"+_root.link].gotoAndPlay("s2");
_root.link = num;
getURL("details.html", "mainFrame");
When I press the button, it opens details.html in a new page
without the frames. I would like it to open details.html in the
mainFrame frame. Is there a trick that I do not know? Thank you so
much!

The standard reply is -
1. Why are you using frames since there are many compelling
reasons not to?
2. Why are you using Flash navigation since there are many
compelling
reasons not to?
Most people here don't work with (assiduously avoid) both of
those critters,
so, you may have trouble getting a more explicit response!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jawy2007" <[email protected]> wrote in
message
news:fgrr3g$ivf$[email protected]..
> Problem with Frames in Dreamweaver 2004 mx using Flash
9. When using Flash
> buttons in Dreamweaver within a frame and specifing a
target frame the
> flash
> button loads a new page in another window and not in the
frame specified.
>
> Steps to reproduce:
>
> Dreamweaver: New Wesbite / "Create from samples" /
Framesets / Select
> "fixed
> left"
> In the left frame insert a Flash Button and link it to a
page to load in
> the
> mainFrame.
>
> What went wrong?:
>
> When the flash button is pressed the page loads in a new
Internet Explorer
> window instead of loading in mainFrame frame.
>
>
> What should have happened?:
>
> When the flash button is pressed the page should load
with the mainFrame
> frame.
>

Using Line 6 DL4 pedal for VOCALS with Garageband

Hey all,
Does anyone know how to help me properly connect my new Line 6 DL4 loop pedal (the green one) to Garageband so I can practice laying down vocal loops for live gigs? I am using this pedal to do harmonies and funky effects with my vocals and have plugged it into my M-Audio pre-amp using a 2-sided quarter inch cord. My mic is plugged directly into the Line 6 pedal and when I open Garageband and create a basic vocal track with "Monitor ON" I can hear the Line 6 effects.
PROBLEM:
I am stomping the Line 6 button to record the loop but when I go to play it back on the pedal or to overdub it, no sound comes out. I will test the pedal with a regular guitar amp, but does anyone know if I can use Garageband as my monitor/amp so I can hear whatever sounds I make with my Line6 pedal in the software?
Thanks!!

The DL4 really isn't meant as a looper and your mac isn't meant to be a amp but if you want to use your mac as a pa forget garageband just use line-in http://www.rogueamoeba.com/freebies/.

Editing a document done in Word 2004. I can't remove lines done in Word. Using Mac Mini with 10.9.4

I am unable to a remove lines from a document originally done in 2004 using Mac Word 2004 while running it on Pages. Using Mac Mini with OSX 10.9.4.
Tried to delete lines. Delete is not highlighted in Pages.
Message was edited by: francinefromkent, 08/8/2014, 5p.m. EST. Edited to give more information.

The version of Pages is the most useful extra information, it hardly matters what Mac you are using.
Menu > Pages > About Pages
The line could possibly be an underline or a paragraph border or a line which is a separate object underneath the rest of the text.
Probably it is a paragraph border.
Peter

Can i use iphone 5 with my other att lines do i need a new sim?

can i use iphone 5 with different phone number than the one i used when i ordered the phone if i have a family plan with muliple lines

Yes u can. I upgrades my wife's phone and I use the new iphone 5 with my number. Take it your carrier and get a different SIM card. Bring your ID and u must be the primary account user.

Generate 2 line items with posting keys in same table while using FM .

Dear Expert ,
For T-code f-65 ,I have to park a FI Document .i tried with PRELIMINARY_POSTING_FB01 for parked Document . But i am not successfully park the document .
with the help of F-65 the data Segregate between Tables VBSEGS and VBSEGD with respecting Posting key . but with this Fm entire entry is displaying in table VBSEGS .For example it generated two line items with posting keys '15' and '40' and these both are displayed in VBSEGS whereas posting key '15' has to be displayed in VBSEGD.
when i check this Document in FBV0 Error reflect " G/L Account 0012000 1001 Does not Exist ".
Here my code -
DATA:   XT_BKPF LIKE BKPF OCCURS 0 WITH HEADER LINE ,
        XT_BSEG LIKE BSEG OCCURS 0 WITH HEADER LINE ,
        XT_BSEG1 LIKE BSEG OCCURS 0 WITH HEADER LINE ,
        XT_BSEC LIKE BSEC OCCURS 0 WITH HEADER LINE ,
        XT_BSET LIKE BSET OCCURS 0 WITH HEADER LINE ,
        XT_BSEZ LIKE BSEZ OCCURS 0 WITH HEADER LINE ,
        XT_BKORM LIKE BKORM OCCURS 0 WITH HEADER LINE ,
        XT_THEAD LIKE THEAD OCCURS 0 WITH HEADER LINE ,
        XT_SPLTTAB LIKE ACSPLT OCCURS 0 WITH HEADER LINE ,
        XT_SPLTWT LIKE WITH_ITEMX OCCURS 0 WITH HEADER LINE .
DATA :    XTEXT_UPDATE LIKE BOOLE-BOOLE VALUE SPACE,
          XTEXT_ITEM_UPDATE LIKE BOOLE-BOOLE VALUE SPACE,
          XI_UF05A LIKE UF05A,
          XI_XCMPL TYPE XFELD VALUE 'X',
          XFS006_FB01 LIKE FS006 ,
          XI_TCODE LIKE T020-TCODE VALUE 'F-65',
          XI_PARGB LIKE RF05A-PARGB        ,
          XI_TCODE_INT TYPE TCODE           .
DATA P_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
XT_BKPF-BUKRS     =     'CP01'.
XT_BKPF-GJAHR     =     2011.
XT_BKPF-BLART     =     'DZ'.
XT_BKPF-BLDAT     =     SY-DATUM.
XT_BKPF-BUDAT     =     SY-DATUM.
XT_BKPF-MONAT     =     '06'.
XT_BKPF-CPUDT     =     SY-DATUM.
XT_BKPF-WWERT     = SY-DATUM.
XT_BKPF-USNAM     =     'ABAPER'.
XT_BKPF-TCODE     =     'F-65'.
APPEND XT_BKPF.
XT_BSEG-BUKRS     =     'CP01'.
XT_BSEG-GJAHR     =     '2011'.
XT_BSEG-BUZEI = '001'.
XT_BSEG-BSCHL = '40'.
XT_BSEG-KOART = 'S'.
XT_BSEG-SHKZG = 'S' .
XT_BSEG-GSBER     =     'CPLN'.
XT_BSEG-BUPLA = 'CP01'.
XT_BSEG-WRBTR     =     10000.
XT_BSEG-PSWSL = 'INR'.
XT_BSEG-ZUONR = 'CH. 123456'.
XT_BSEG-HKONT = '241000'.
APPEND XT_BSEG .
CLEAR XT_BSEG.
Vendor line item - required even for header only - BSEG table
XT_BSEG-BUKRS     =     'CP01'.
XT_BSEG-GJAHR     =     '2011'.
XT_BSEG-BUZEI = '002'.
XT_BSEG-BSCHL = '15'.
XT_BSEG-KOART = 'S'.
XT_BSEG-SHKZG = 'H' .
XT_BSEG-GSBER     =     'CPLN'.
XT_BSEG-BUPLA = 'CP01'.
XT_BSEG-WRBTR     =     10000.
XT_BSEG-PSWSL = 'INR'.
XT_BSEG-ZUONR = 'CH. 123456'.
XT_BSEG-HKONT = 'PC04000001'.
APPEND XT_BSEG .
CLEAR XT_BSEG.
CALL FUNCTION 'PRELIMINARY_POSTING_FB01'
   EXPORTING
     TEXT_UPDATE            = XTEXT_UPDATE
     TEXT_ITEM_UPDATE       = XTEXT_ITEM_UPDATE
I_UF05A                =
     I_XCMPL                = XI_XCMPL
FS006_FB01             =
      I_TCODE                = XI_TCODE
I_PARGB                =
I_TCODE_INT            =
IMPORTING
    XEPBBP                 = CHECK_A
    TABLES
      T_BKPF                 = XT_BKPF
      T_BSEG                 = XT_BSEG
      T_BSEC                 = XT_BSEC
      T_BSET                 = XT_BSET
      T_BSEZ                 = XT_BSEZ
T_BKORM                =
T_THEAD                =
T_SPLTTAB              =
T_SPLTWT               =
          EXCEPTIONS
            ERROR_MESSAGE = 1.
P_RETURN-ID         = SY-MSGID.
P_RETURN-TYPE       = SY-MSGTY.
P_RETURN-NUMBER     = SY-MSGNO.
APPEND P_RETURN.
     p_return-MESSAGE_V1 = XSYMSGV.
IF SY-SUBRC = 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT = 'X'.
ENDIF.
WRITE :/ sy-subrc , sy-MSGV1 .
Thanks ,
Ashish Gupta

Hi Raghuram,
I found a very important SAP Note 103051, details are below.
An IDoc processed by function module IDOC_INPUT_INVOIC_MM (of category INVOIC01) must not refer to the same purchase order item in several invoice items. This is also valid if for a goods receipt-related invoice verification several delivery notes belong to the same purchase order item.
Depending on the system settings and the situation, various error messages can occur (for example, FD240 'Order item ... selected more than once' or M8050 'Balance not zero: & debits: & credits: &').
In this situation module IDOC_INPUT_INVOIC_MRM generates error message M8321 'Document contains same order item more than once'.
For example, this situation occurs if you work with individual batch valuation and the SD billing document executes a batch split for different batches which belong to the same purchase order item and delivery.
Other terms
INVOIC, SAPLIEDI, M8047, M8, 321
Reason and Prerequisites
This is because of the program design.
Solution
There is no solution for IDOC_INPUT_INVOIC_MM.
Module IDOC_INPUT_INVOIC_MRM (only as of Release 4.0) for the logistics invoice verification can distinguish different goods receipts by means of the delivery note number. For this purpose, GR-related invoice verification must be active.
Owing to this symptom, billing documents for single batch valuation with batch split cannot be settled in MM-EDI inbound processing. The settlement generates exactly the situation described (several invoice items for the same purchase order item). In this case, the only solution is to deactivate the billing of the batch sub-items in SD Customizing and to calculate the main item only.
Hope this helps.
Reward if helpful.
Thanks

Can i use photoshop touch with out internet photoshop in off line

can i use photoshop touch with out internet photoshop in off line

If the question was if you could use PS Touch without Internet access, yes. I do it all the time.

JavaScript error using UIXML to generate frames

Hello all,
I am trying to use the uix:frameBoderLayout and uix:frame elements to generate an HTML page with frames. I get a Javascript error when running the testFrame.uix in JDeveloper 9.0.3. Both MSIE and Netscape yield the same error.
The JavaScript error is:
JavaScript Error:
http://20.19.205.86:8988/pssWeb-pss-context-root/testFrame.uix,
line 1:
_checkLoad is not defined.
The HTML generated is:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html dir="ltr" lang="en-US">
<head>
<title>Property Security System Application</title>
<link rel="stylesheet" charset="UTF-8" type="text/css" href="/pssWeb-pss-context-root/cabo/styles/cache/blaf-en-netscape.css">
</head>
<body class="xc" style="background-color:#FFFFE1" onload="_checkLoad(event)" onunload="_checkUnload(event)">
<script src="/pssWeb-pss-context-root/cabo/jsLibs/MarlinCore.js">
</script>
<frameset border="0" rows="100%,*">
<frameset rows="*,0" onresize="if(!frames['_uixJS'].cached){location.reload();}">
<frameset rows="null,*,null">
<frame name="top" marginwidth="5" frameborder="0" marginheight="0" noresize src="topFrame.uix">
<frame name="center" marginwidth="5" frameborder="0" marginheight="0" noresize src="centerFrame.uix">
<frame name="bottom" marginwidth="5" frameborder="0" marginheight="0" noresize src="bottomFrame.uix">
</frameset>
<frame frameborder="0" marginwidth="0" marginheight="0" title="" name="_uixJS" noresize src="/pssWeb-pss-context-root/cabo/jsps/a.jsp?_t=jsCache">
</frameset>
<noframes>
</noframes>
</frameset>
</body>
</html>

_checkLoad is contained in the MarlinCore.js file. That file should be in cabo/jslib/ directory.
Two things strike me odd about the generated HTML code with relation to JavaScript. First, I expect to see JavaScript source files declared in the head portion. Second, the source files is declared after the onload call is made to the _checkLoad function.
The third thing that I can see possibly causing the error is that the MarlinCore.js file is not visible to the server and therefore not delivered to the browser. But I am not certain where to find the files used by the embedded OC4J server.
Is this a bug in 9.0.3?
The uix files follow. All three framed pages (topFrame.uix, centerFrame.uix and bottomFrame.uix) display nicely in the uix preview and run nicely in the embedded OC4J.
testFrame.uix
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title="Property Security System Application"/>
</metaContainer>
<contents>
<body>
<inlineStyle>
<property name="background-color">#FFFFE1</property>
</inlineStyle>
<contents>
<frameBorderLayout xmlns="http://xmlns.oracle.com/uix/ui">
<top>
<frame name="top" source="topFrame.uix">
</frame>
</top>
<center>
<frame name="center" source="centerFrame.uix">
</frame>
</center>
<bottom>
<frame name="bottom" source="bottomFrame.uix">
</frame>
</bottom>
</frameBorderLayout>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
</page>
topFrame.uix
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<pageLayout>
<contents>
<text text ="Top frame"></text>
</contents>
</pageLayout>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
center Frame.uix
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<pageLayout>
<contents>
<text text="center frame"></text>
</contents>
</pageLayout>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
bottomFrame.uix
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<pageLayout>
<contents>
<text text="bottom frame"></text>
</contents>
</pageLayout>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
Your assistance is appreciated,
Bill

Did you create the files with JDev 903 preview or JDEV 902? If you created with JDEV 902 and upgraded your project to
903 you need to delete all the files in the cabo directory in your public_html directory. That should get rid of your
javascript errors.

Using Line Stretch With Frame Property

Similar Messages

Maybe you are looking for