Using linksys wired router with AE 2nd generation

Hi. I'm trying to use a linksys befsr41 (non-wireless 4 port router) with a 2nd generation airport express. I have several wired rooms that I want to setup separate networks with other AE's. My configuration is: cable box-->AE WAN in--AE LAN out-->Linksys-->ethernet cable through the house—>AE WAN in rooms. Can’t seem to make this work. I can do it wirelessly (i.e having the remote AE's joing the first AE network) but several of the rooms have poor signal. As soon as I try and create a new network the remote AE’s can’t connect to the network. I checked the cables and they are all good.
Thanks.

We need some additional information to be able to troubleshoot this issue.
Can you provide the make and model number of the cable modem that you are using?
Are the other AirPort Express devices that you are trying to connect also 2nd Gen versions? If not, what version are they?
The Linksys router needs to be configured to operate in Bridge Mode so that it will function as if it were an Ethernet switch.....not a router. Is the Linksys set up in Bridge Mode at the current time?
Looking at the Linksys support forum....example below......I cannot tell whether it is possible to configure the Linksys product in Bridge Mode:
https://community.linksys.com/t5/Wired-Routers/Use-BEFSR41-in-Bridged-Mode/td-p/ 272061
Are you trying to configure the AirPorts using AirPort Utility on a Mac....or on an iPhone / iPad? If you are using a Mac, what operating system is the Mac running? If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X version that you see there.

Similar Messages

Not sure how to use linksys wired router and using Airport Express as bridg

Hey, thanks for any help.
I now own a Linksys BEFSR41 Cable Router. I was told earlier that I could connect the modem to this router and then to the wireless AEBS. I was wondering if anyone knows how to do this bridge thing. Also if anyone has any experience with this linksys router with a mac.
Thanks a lot!

all good, thanks though!

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.

If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

Attempting to use bluetooth, but my newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

Attempting to use bluetooth. My newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

You can try:
- reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off an then backon your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

HT4199 I have a new iPhone 4s. I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution?? 2.4 works but is not optimal with other devices in home

I have a new iPhone 4s. I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution?? 2.4 works but is not optimal with other devices in home (computers; tivo). Have others seen this? Any advice is much appreciated.

Stephen Spark is right - your best alternative is to use a simultaneous dual band wireless router like the AirPort Extreme. Your Cisco Linksys2000 is not a dual band router, meaning that it will be constrained to operate at the slowest speed of all the devices on your network.
The AirPort Extreme's dual networks will support all your 802.11n devices as well as all your 802.11b/g devices on both the 2.4 and 5 GHz frequencies simultaneously.

LinkSys wired router set up advise?

I recently bought a LinkSys BEFSR41 wired router w/4 port switch and I've been having trouble setting it up. I bought it so I could have a connection for an XBox 360, and possibly a PC laptop soon. It's working right now, but the IP in my system prefs is set to the 192.168.1.100 which I know was set by the router and is not actually my Mac's IP address. When I first set it up I went in and changed that linksys address within the suggested range by going on to the linksys set up & administration page, but about a week later I started having trouble, and couldn't connect to the web, so I reset everything, and I'm back to the address above. I've done my best to follow the instructions on the page here:
http://homepage.mac.com/car1son/initiallinksyssetup.html#finish
I've also tried going on the LinkSys site, but they don't seem to like us Mac users.
is it safe to keep the 192.168.1.100 address? I've changed the password to access the router control page, and typed in all my Mac's IP settings, but is there something else I should be doing? I'm just REALLY confused by all the options on the router's control page, like the MAC address clone, filter, etc.
I have it set up to "obtain IP automatically"
One other thing I've noticed is that when I run bit torrents, the tracker always shows me as firewalled now, which was not the case before the router (I have the torrent port open)
Thanks in advance,
Jeff
iMac G5 17" 1.9 ghz Mac OS X (10.4.5)

I had problems in the past with my Linksys setup. I had the "Configure IPv4" set to "Using DHCP" for a long time but my wireless connection stopped working. I ended up having to manually enter my IP adress, subnet mask, and dns server info.

Help! Extremely slow Internet speed using Linksys WRT54G router

I have an eMac running OS 10.3.9 and wired to a Linksys WRT54G router using ethernet cable. I have to use this router for my work PC. I'm also using WildBlue satellite internet. The problem is, I'm getting about 1.5 Mbps on my PC, but less than 33 Kbps on my eMac. It was running faster before using dial-up. I've called WildBlue and Linksys tech support, and they can't help. Can anyone help?
By the way, my son is using his iBook on the same router, only wireless, and he's happy with the speed he's getting compared to dial-up.
Thanks,
Eric

1400 kbps is a lot nicer than 33 kbps, isn't it? You can possiblly tweak it a little more --- I know I've seen a MTU of 1460 mentioned --- since you can also revert back to the 1400 MTU setting you found.
(Broadband Optimizer is in one sense a nice GUI to the terminal commnads you found and used.)
One more thing to be aware of, satellite internet is subject to longer latency times than cable or DSL, due to the unavoidable geometry of bouncing data packets off a satellite in orbit. That could be an issue if you ever want to play real-time online multiplayer adventure type games. It shouldn't be an issue for being able to grab OS updates in minutes instead of hours, through. Enjoy your broadband access!

Have a static IP for internet access - how do I replace my Linksys wireless router with Time Capsule?

Have 5 macs on an ethernet network - some wired and some wireless to a Linksys router. My provider uses static IP and DSL for internet access. I am replacing an existing Linksys router with the Time Capsule. The Static IP settings I have are IP address, Gateway, Mask, primary DNS and secondary DNS. The Airport Utility is not as straight forward as the Linksys setup. There is not a place to list gateway. Consequently I am unable to connect to the internet and am back on the Linksys router until I get this resolved. Any suggestions would be much appreciated !

You enter the static public IP address info on the TCP/IP tab within the Airport Utility. For a static address, use Configure IPv4 = Manually. You use the Router field for the Gateway address.

How to extend a wifi network of third party router with TC 4th generation?

After searching the communities for a while, I did not find a definitive answer on the following question:
- I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
- This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
- This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
- The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
- There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
I really would appreciate suggestions
Bram Bos

gilles13 wrote:
I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
Airport can not be used to extend a WiFi created by a non-Apple box.
You need to turn off the radio in the router (shut down the existing WiFi). Purchase TWO Airport Express units. Connect one to the router with an Ethernet cable. Configure that one as your primary WiFi network and then use the second Express as the extender.
You need to locate the second Express where it receives a decent WiFi signal. Too far away and it has nothing to extend. Too close and it doesn't buy you anything. Before you plug in the second Express, check to see where the primary WiFi disappears completely. My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
If you use Airport Utility to configure the units, it's a snap. In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

Internet drop outs on my G5 since I use a wired router instead of wireless

Hi guys!
I used to have wireless internet at home (1 x G5 & 2 x windows laptops). Internet worked fine and fast. Although I couldn't get all computers into a internal network (for easy sharing files...), but that's not the issue now.
Anyway, I have a new roommate in the house that doesn't have wireless on his windows pc. So, I connected all computers to a 4 ports router. I ditched the whole wireless thing because I couldn't get it working together with the wired router thing. So all computers are linked to the router by cable.
Now, at first everything worked fine. All computers had internet and I even had my long awaited network so that I could share files at high speed between computers (mac - windows). Suddenly, I guess after a couple of hours, my mac started having difficulties finding the network. At times I have no internet, or it takes looooooooooooooong to load up webpages and sharing files with my windows laptop takes like 6hours for 3giga (which normally is done in a couple of minutes). My windows laptop has no problem with internet, no drop out no nothing, everything works fine (except sending files to my mac which also takes hours...).
Anybody knows what to do?
Also anyone knows if the following is possible:
- cable comes in my house (WAN)
- goes to wired 4port router
- from the router 1 wire goes directly to a pc
- from the router another wire goes to my wireless accesspoint which then would be used to connect 1 or more wireless pc's.
- with all that, I'd like to have internet on all computers AND have a fully working network between all computers (mac and windows)
Anyone knows if this is possible?
Thanks for your time!

The wireless access point is a D Link Airplus G+ 2.4Ghz. It has no extra ethernet ports.
I also thought of having a wireless router with extra ethernet ports. But of course this would mean another cost... I was hoping that I could fix it with the things I allready own.
But, nevertheless, there might be a little change in things as I just tried connecting with the second ethernet port on my mac. Haven't had any problems yet (+/- 10minutes). Am gonna try to send big files to my laptop in order to test the speed between them.
Will get back with the results.
Thanks for your help!

Using linksys wired router with AE 2nd generation

Similar Messages

Maybe you are looking for