Using Live! Card with Audigy control head

)I have Audigy 2ZS and Sounblaster Li've ! cards that I bought new, and I have all the Creative OEM software for both.
I have an Audigy control head that came from a used PC that I picked up.
Can the Audigy control head be used with the Li've! card ? If so, which software do I use ?
The input/output pins seem to match, and I have the correct ribbon cable.
Anyone know about this ?
Thanks,
JS in Las Vegas

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

Similar Messages

How to use wild card with variable in powershell

HI
i am trying to use wild card with variable but getting an error message, "You cannot call a method on a null-valued expression."
$src = 'C:\Temp'
$TabletzipPath = $src + "tab*.zip"
i would like to copy the tablet zip file which is placed in in $src to be copied in $TabletzipPath.
i am using tab* because this file name changes continuously. so if i give a fix name for example tablet1.zip than it works fine.

Not sure if the wildcard will work without seeing how you're using the variable.
That said, I can say that it looks like you're missing the backslash between the $src path and the wildcard filename. As-is the above code assigns a value to $TabletzipPath of "C:\temptab*.zip" instead of what you are likely expecting ("C:\temp\tab*.zip")
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

Type '''about:preferences#applications'''<enter> in the address bar.
Now follow the picture.

Want to use bluetooth speakers with volume control, don't want the iPad internal speaker sound, is this possible?

want to use bluetooth speakers with volume control, don't want the sound at the iPad internal speakers, only on the external speakers. is the possible? and how

You can't downgrade the iOS.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Audigy 2 card with Audigy Front Panel not worki

I've just bought a used audigy 2 card with an audigy front panel. I have installed everything and have sound from the card to my speakers.
The front panel has a blinking light on the optical out and when I plug headphones into the panel, I can hear static and control the volume of the static from the knob on the panel.
I can't hear anything else through the headphone jack and can't get any input signal using the line 2 input on the front panel.
Connections and drivers appear to be OK, am I missing something......
Thanks,Dave.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

How to use 9264 card with daq

Hi friends,
I m using labview 8.6 version. I hve interfaced labview with cdaq 9172.
I have used 9201, 9203 ,9219 card.Now i want to use 9264 card i.e analog output card.I am not getting how to use it .wheather I hve 2 use on function plate express--> input-->daq assistant or something else.please help me. i want to control valve through 9264.i am sending some screen shot how i m trying 2 use.
Attachments:
1.jpg ‏4373 KB
2.JPG ‏103 KB
4.JPG ‏168 KB

Hi Ajju
You can use the DAQ Assistant express VI, but since the 9264 is an output module you will need to choose "Generate Signal" instead of "Acquire Signal" in the dialog. Then you will specify what you want to output, from which channels, how fast etc. in the same maner as you do when acquiring a signal.
Hope that clears up teh confusion
Best Regards
David
NISW

Using Scope card with Motion card

Sir,
In my application of Non-Destructive Testing of tubes using Ultrasound, I am using a motion card for controlling the motion of the Ultrasound probe (that runs with stepper motor)using the motion card. This probe moves all over the specimen under test. I am using Scope card to get the data from the probe and display and storing the waveform. Now I am moving the Probe step-by-step manner by specifying the step-increment and acquiring the data. Is it possible to acquire the data if i move the probe in the continuous manner by specifying the speed and end position alone? What are all the things i should take in to consideration to get and store the data efficiently?
Kindly help me regarding this.
Thanks,
Ramkumar. D
Soliton Technologies.

From the standpoint of the Scope card there should be no issues with measuring the data continously. There are several LabVIEW shipping examples that you could take a look at.
Thanks,
Bryan Snarr
Field Engineer
Northern California
National Instruments

Using wild card with Captivate 5 ( fill in the blank)

I am training software package that requires many fill in the blanks besides the login screeen. If I were to recording the actions using Captivate 5 record, I think, I can only use a demonstration recording as oppsed to having my students interact with the product by filling in the blank. For example, my product asks for a login. When I login to demonstrate how it should be done, the product reponds correctly. By my student is limited to watching as opposed to interacting. While login is not such a big deal, there are several other areas where the same concept applies. Ideally, I wish to use wild cards in fill in the blank so that any name or information can be used to interact with Captivate and move the slide along. Is this possible, and if so, how?

I think Lilybiri may be misinterpreting your use of the term "wildcards" to mean using them in the programming sense.
Perhaps you are referring to the characters that appear in a typical Password field to hide what the user is actually typing?
If so, the text field object in Captivate has an option to use these password characters so that the user's typing characters are hidden. The characters used are asterisks, which are what some people refer to as wildcard characters.

Can I use gift card with iTunes to buy additional iCloud storage on my ipad2

I need to purchase additional iCloud storage. My question is I have a couple gift cards with iTunes. Can I use one or both gift cards to buy this additional storage? Thank you. I await a response.

According to Apple, payment methods accepted include iTunes store credit, credit cards, and debit cards. Presumably this means that if you redeem the gift card to create an iTunes store credit, the upgrade would be charged against this credit. If you want to confirm this, call the Apple online store at the number shown at the bottom of this page.

Using AbleNet intelliswitch with switch control?

I am attempting to interface AbleNet IntelliSwitch to Yosemite Accessibility Switch Control on MacBook Pro to use a button switch as a click and enter. I have that set in the Intellitools software, but Mac is not recognizing it at all points when tested by manually moving the mouse pointer and then clicking with the external switch.

The IntelliSwitch is so old - I don't think it will work with Switch Control. The only thing you might try is seeing if it will work without the driver installed. Intellitools is meant to be used with Discover Envoy and it just may be that if you try it without the software, it might work.
Don't get your hopes up though. If you'd like me to recommend some switches that I know work with Switch Control, let me know.

Using stored procedures with dabasae controls

Hi. We have two questions.
Answer 1:
We are working with Sybase and we are trying to use stored procedures (SP) with databse controls but we don't know how to obtain SP's return. We can to use SP normally if that SP don't have any return. Next example works fine but "stored_procedure_name" actually returns an number (error code) and we need to obtain it:
* @jc:sql statement="{call stored_procedure_name (?)}"
Answer 2:
Do you know how to call SP dinamically? This mean to call an sql statemente where stored_procedure_name and its parameters could be pased as paremeters. That looks as:
* @jc:sql statement="{call {sql: spName} {sql: listOfParameters}}"
Thak you very much for your comments.
Regards.

I have my entity manager setup in a singleton.
I'm finding it's costly to generate the emf, but if I don't close the em (enitity manager) and emf (entity manager factory) my open cursor count climbs until I exceed the max number of open cursors on the database (11g RAC)
I'm committing the connection, and uow, and closing the em at the end of each call.
But until I close the emf, the open cursors aren't released.
TransactionhistoryPkg tranPkg = new TransactionhistoryPkg(conn); //Class created over database package via JPublisher
tranPkg.transactionhistoryInsSp(insertTrans.getCardId()); // executes db package
tranPkg.closeConnection();
conn.commit();
uow.commit();
uow.getAccessor().decrementCallCount();
em.close();
Am I missing something really obvious here??
btw - I found this link helpful in troubleshooting the max cursors issue: https://support.bea.com/application_content/product_portlets/support_patterns/wls/InvestigatingORA-1000MaximumOpenCursorsExceededPattern.html

Using Live 5 with the new Macbook

Sorry, I didn't see a section for Ableton's Live software. But maybe you guys will have some insight.
I record music. Mainly guitar tracks with drum and base loops. Very simple stuff.
My old laptop was an older Powerbook G4 that my employer bought me for work purposes but I also use it to support my recording hobby. I used a program called Live 5 to put my music together. This worked well for me I never had any problems and the computer could handle quite a large CPU load.
My employer decided to upgrade my computer a few weeks ago. So now I have a MacBook 2.2 GHz Intel Core Duo with 2 gigs of ram (more than enough)
Everything about this computer appears to be superior to my older powerbook G4, except for one thing. The CPU's are through the roof when I'm trying to arrange and record music within Live 5. It is such a problem that I can't even turn on one single drum loop without the CPUs Blasting off to 50%. This causes a really nasty sound issue. It's like Snap, Crackle and Pop got into my computer!
Why am I having this problem? Is there an issue with the Macbook's hardware that I should know about? These are supposed to be the ultimate media creation devices, a simple drum loop should not be enough to fry the processor.
I am wondering if I need the latest version of Live. They have it up to Live 7 now. I'm thinking it may be an issue with the old software not meshing with the new processor. Unfortuneatly its a $150 upgrade for me and I need to know if it will solve the issue before I buy it. Or do I just have the wrong computer.

Sorry, I didn't see a section for Ableton's Live software
That's because this is an Apple forum, not an Ableton one.
You have a PPC version of Live. The first Universal Binary version of Live was 5.2 - this contains Intel code for your Macbook.
You are currently running the PPC version under emulation (ie sloooow).
You need to upgrade Live to *at least* 5.2 to use Live natively on an Intel Mac.

Can't propagate Cache-Control headers with Surrogate-Control header

My application may set the following response header to cause webcache to process the esi:include's:
Surrogate-Control: content=ORAESI/9.0.4, max-age=3600
It and also may set the following intended for the browser cache:
Cache-Control: private
or say:
Cache-Control: max-age=3600
However Webcache removes this and always adds the following whenever surrogate-control has been set:
Cache-Control: max-age=0
This means I can't have browser caching and esi page compilation, just one or the other.
This seems to be designed behaviour can someone explain why this is and if it can be worked around?
I realise that the Cache-Control header should be ignored by webcache but why cant I propagate it to higher caches?

Patrik,
You'll need to convert the meta http-equiv tags into actual HTTP headers before sending for Web Cache to be able to parse it.

HT1918 Couldn't use debit card with iTunes store

I opened a new bank account. When I tried updating my debit card in iTunes it didn't work. I got a message saying "Your credit card does not match your bank's records." The same thing happened to me a year ago when I opened a new account. After a few weeks it worked. This must be common. Has anyone else had this problem?

Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
You can try contacting the iTunes Store and asking if there is any way to use your card, but they probably will tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
Using a debit card in any online service where it stores your card is a bad idea in any case since if someone gains access to your account in the service, they can quickly drain your bank account. Credit cards limit your liability, as do prepaid iTunes cards.
Regards.

Audigy 2 card with Audigy 2 ZS drivers and Live Driv

I recently bought a Li've!Dri'veII bay for my system. To use this I plugged it into my Audigy 2 Value card which I have had for about 2 years. The bay came bundled with a SoundBlaster Li've! Platinum.
I tried to install my drivers, but as a Platinum, but the Bay still did not respond, didnt send anything out or receive a signal in. There is definitely power because when I plug in the headphones you can hear some white noise, but thats it.
I searched round for a solution and one was to install the Audigy 2 ZS drivers. I did this by following the following instructions:
http://driverheaven.net/showthread.php?s&threadid=45004
This allowed me to also enable lots of extras such as the THX console and other stuff previously unused as my Audigy 2 drivers didnt have them.
Now I have 2 problems:
) my Li've!Dri'veII Bay isn't working and
2) In games I get sound glitches such as random noises that shouldnt be there, Missing noises such as gunshots are not heard or parts of the noise are missing.
So what do I need to do to sort this out, because I do wish to be able to use my system to its full potential.
Thanks in advance to anyone who can help.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

Using Live! Card with Audigy control head

Similar Messages

Maybe you are looking for