Using Loadrunner to test Jinitiator applets

I am not familiar with JInitiator, and I am currently researching using LoadRunner 7.5 to perform load testing on an applet using JInitiator 1.1.8.19. The applet also uses Java RMI as its messaging protocol.
Is there any information about how to do load testing on JInitiator, or has anyone used Loadrunner for Jinitiator jvm-based testing before?
If so, any assistance would be greatly appreciated. Of course, the deadline for my research was yesterday! :/
Thanks,
Brent Friedman

You want to use LoadRunner 7.5 to load test Forms? This is possible, just make sure you use Oracle NCA. The rest should be straighforward.
You don't test JInitiator, as such. LoadRunner will simulate the clients. So you don't need to do "Jinitiator jvm-based testing". Remember, you're testing Forms on the middle tier, no JInitiator on the client.
Regards,
Robin Zimmermann
Forms Product Management

Similar Messages

Use loadrunner to test Web Dynpro Java Application

Hi Gurus,
I'm using Loadrunner 11.0 to do load test to Web Dynpro Java Application. At first, I used web(http/html) protocel script, and I could record the whole business process successfully. But the script seems very hard to understand. For example, the following script is so complex.
After this, I tried 'SAP Click and Script'. At this time, loadrunner only record my logon action, while my business operation was not recorded in the script.
"Body=sap-ext-sid=nYCksrUa3nHq2NIwTPpTKg--LpNoVBU_d2sS7nCHLaG*qQ--&sap-wd-cltwndid=WID1411644055966&sap-wd-norefresh=X&sap-wd-secure-id=kNh-egwklSanOHIGRb7-eA%3D%3D&SAPEVENTQUEUE="
"ComboBox_Select%EE%80%82Id%EE%80%84aaaa.App_Property_FormCompView.ANLKL%EE%80%85Key%EE%80%84FA040%EE%80%85ByEnter%EE%80%84false%EE%80%83%EE%80%82ClientAction%EE%80%84submit%EE%80%83%EE%80%82urEventName%EE%80%84COMBOBOXSELECTIONCHANGE%EE%80%83%EE%80%81Form_Request%EE%80%82Id%EE%80%84...form%EE%80%85Async%EE%80%84false%EE%80%85FocusInfo%EE%80%84%40%7B%22sFocussedId%22%3A%20%22aaaa.App_Property_FormCompView.ANLKL%22%7D%EE%80%85Hash%EE%80%84%EE%80%85DomChanged%EE%80%84false%EE%80%85IsDirty%EE%80%84fal"
"se%EE%80%83%EE%80%82EnqueueCardinality%EE%80%84single%EE%80%83%EE%80%82%EE%80%83",
Could anyone give me the clue or materials about WDJ load test using loadrunner? Thanks very much
regards.
zhihua

Hi Zhihua,
First delete all the cookies from your browser.
Close all the internet sessions which are opened in your system. During your script recording
Open only 1 session which you will be recording for java script.
The above mention log is the cookies from the internet explorer.
its of no use for the script you can even delete from the script.
Regards
Mohammed

How to test batch jobs using loadrunner??

Hi,
Can anyone pl. tell me how to load test the background jobs in SAP using loadrunner??
Thanks,
Raj.

Hi Samir,
http://www.qualtech-int.com.au/filedb/uploads/LRUG.pdf, the following link is not working, i guess we need to have an account to access the site. Please send me the document if you have , to my email id: [email protected],..
Can you give me a quick walk through of LR with SAP, as i have been assigned to a new project and i have never worked on LR with SAP.. please let me know if you can give me a demo on the same..
You can either show it on my machine , as i have SAP R/3 with BI and also LR..
Please let me know if you can walk me through an example..
If not, pls send me any interactive document with screenshots, so as to start with..
Thanks
Vinni,..

Testing my applet

how can I cancel the temporary files feature in internet explorer so I can test my applet ?
any other solution for this frusrating situation ?

Thank you both
And how can I debug my applet in this case
(I cannot use AppletViewer cause I'm using
getAppletContext() for links)Hmm.. I answered that in a thread a couple of days ago. I'll try and see if I can find it.

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception -Interface not registered(Exception from HRESULT:0X....

Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...."
I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple html page, coded ui is showing a message -"Interface not registered(Exception from HRESULT:0X...."
Please give me solution , why this is hapening. I am having problem with object identification. Even I am not able to identify any object in google.com.
swapnanil sengupta

TechnologyName is displaying as "MSAA" . But my application is a Webapplication.If I try to spy the google .com's search field then also TechnologyName is displaying as "MSAA". Is it any configuration issue of vsts codedui.
swapnanil sengupta

Using a filechooser in an applet

Is it possible to use a filechooser for an applet save button? If so how can you do it? So far I have only been able to use the filechooser object with JFrame and not JApplet.

Hi,
I'm a newbie, but I just had a similar problem and the solution was in the html code to display the applet. here's the code:
<applet width=700 height=500 code="ImageExample.class"> </applet>
make sure the height and width here are big enough for your imaage.
HTH
Paul

Using a main in an Applet

Hello, I have a question.
How do you use a mian in an Applet.
Eample, after an applet section is complete, I want it to go into Console use. Does anyone know how to combine the two? Thanks
Note: So far, I got the program to go into the Console but It stops working when it asks for user input. There are no "String args[]" and that is what I hypothesis is the error

import javax.swing.*;
public class MyApplet extends JApplet {
     public void init() {
          //init stuff here
     public void start() {
          //start stuff here
     public static void main(String[] args) {
          JFrame f = new JFrame();
          JApplet a = new MyApplet();
          f.getContentPane().add(a);
          f.setSize(600, 400);
          f.setVisible(true);
          f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          a.init();
          a.start();
}Excuse me, but is there a way to do this on Applet only instead of JApplet... I was told we need to use Applet only...

SSMS 2012:FOR XML PATH Using XPath Node Tests-Columnn name 'test()' contains an invalid XML identifier as required by FOR XML?

Hi all,
I am learning XPATH and XQUERY from the Book "Pro T-SQL 2008 Programmer's Guide" written by Michael Coles, (published by apress). I copied the Code Listing 12-8 FOR XML PATH Using XPath Node Tests (listed below) and executed it in my
SQL Server 2012 Management Studio:
--Coles12_8.sql // saved in C:/Documemnts/SQL Server Management Studio
-- Coles Listing 12-8 FOR XML PATH Using XPATH Node Tests
-- Retrieving Name and E-mail Addresses with FOR XML PATH in AdvantureWorks
-- 16 March 2015 0935 AM
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "test()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH;
I got the following error message:
Msg 6850, Level 16, State 1, Line 2
Column name 'test()' contains an invalid XML identifier as required by FOR XML; '('(0x0028) is the first character at fault.
I have no ideas why I got this error message. Please kindly help and advise me how to resolve this error.
Thanks in advance, Scott Chang

Hi Michelle, Thanks for your nice response.
I corrected the mistake and executed the revised code. It worked nicely.
I just have one question to ask you about the appearance of the xml output of my Co;les12_8.sql:
<row>
<?nameStyle 0?>
<Person ID="1" />
697-555-0142<Person><Name><First>Ken</First><Middle>J</Middle><Last>Sánchez</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="2" />
819-555-0175<Person><Name><First>Terri</First><Middle>Lee</Middle><Last>Duffy</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="3" />
212-555-0187<Person><Name><First>Roberto</First><Last>Tamburello</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="4" />
612-555-0100<Person><Name><First>Rob</First><Last>Walters</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="5" />
849-555-0139<Person><Name><First>Gail</First><Middle>A</Middle><Last>Erickson</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="6" />
122-555-0189<Person><Name><First>Jossef</First><Middle>H</Middle><Last>Goldberg</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="7" />
181-555-0156<Person><Name><First>Dylan</First><Middle>A</Middle><Last>Miller</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="8" />
815-555-0138<Person><Name><First>Diane</First><Middle>L</Middle><Last>Margheim</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="9" />
185-555-0186<Person><Name><First>Gigi</First><Middle>N</Middle><Last>Matthew</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="10" />
330-555-2568<Person><Name><First>Michael</First><Last>Raheem</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="11" />
719-555-0181<Person><Name><First>Ovidiu</First><Middle>V</Middle><Last>Cracium</Last></Name><Email>[email protected]</Email></Person></row>
<row>
I feel this xml output is not like the regular xml output. Do you know why it is diffrent from the regular xml xml output? Please comment on this matter.
Thanks,
Scott Chang
What do you mean by regular xml document? Are you referring to fact that its missing a root element? if yes it can be added as below
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "text()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH('ElementName'),ROOT('RootName');
replace ElementName and RootName with whatever name you need to set for element as well as the root element
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Unable to get Windows User Name using Oracle Forms 6i, Jinitiator 1.3.1.17

Hi,
Requirement: Get Windows User Name using Oracle Web Forms 6i.
Tools Using: Windows NT, Oracle web forms 6i, Oracle 10g DB.
Description: I am using GetClientInfo JBean from otn.oracle.com, which gets windows user name, IP address and machine name. The demo I got from oracle web site uses Jinitiator version 1.1.7.18. While we are using the latest version Jinitiator 1.3.1.17. Due to this reason, I am unable to use Javakey which comes with older version but doesn't come with newer version, that's why I can't create the new JavaBean Java identity (PJC).
Please advise what to do. All environment variables are set everything is done, this is the only thing bothering me.
I went through the article 202768.1 from metalink, but on step 5, it gives an error keytool error: java.lang.Exception: Input not an X.509 Certificate.
Also, please let me know if there is any other workaround for this requirement.
Thanks & Best Regards,
Mo

Hi,
Thanks for your kind reply. Actually there was a problem in creating a certificate, now it is okay with the same method. Certificate got imported on client and everything is ready.
Now, the problem is when I try to set Bean Area Implementation Class property with oracle.forms.demos.GetClientInfo, it gives an error FRM-13008 Cannot find JavaBean with name 'oracle.forms.demos.GetClientInfo'.
I went through the articles 1072329.6, 196824.1, and set ClassPath and Path variables with proper values. Also, I have copied jar file and signature file in forms60/java folder. I don't see any problems. Please let me know what I am doing wrong. My limitation is that I have to do all this in forms6i.
I searched forums on metalink and found out that someone installed Patch 15, and everything went okay for him. Do you think I should install Patch 15? if YES, how will I do it, I mean should I first uninstall my forms and then install patch15 or install the patch on my forms?
Thanks so much for your help.
Thanks & Best Regards,
Mo

How do I use Apple Hardware Test on a Mid 2010 macbook pro?

This MacBook is now running Mavericks 10.9.1
This makes it so I can't update the firmware to use Apple Hardware Test within OS X internet recovery as discussed in this article:
http://support.apple.com/kb/ht4904
Holding down "D" at boot does nothing
Holding down Option + D gives me Apple Hardware Test that can't be run because the firmware isn't updated and can't be updated because the update can only be applied to systems running Mac OS X 10.7.2

You need the origional grey disk 2 that came with the mac when new. It contains the AHT and applications. You can call Apple and order the disks.

Using Apple Hardware Test?

Hi, I need some assistance.
I've got a MacBook Pro from 2011. That have some hardware, I'm sure. Please see this post. https://discussions.apple.com/thread/6029708
So I'm trying to use Apple Hardware Test. http://support.apple.com/kb/HT1509?viewlocale=en_US
But I can't make it work. And I've read the instruction for using the Apple Diagnostics test as well. http://support.apple.com/kb/HT5781?viewlocale=en_US
And it seems to me to be exact same approach.
Using Apple Hardware Test on computers with OS X 10.7 or later
1. Press the power button to turn on your computer.
2. Press and hold the D key before the gray startup screen appears.
3. It takes a minute or so for AHT to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen...
To start Apple Diagnostics:
Turn off your computer if it is on by choosing Shut Down from the Apple () menu.
Press the power button to turn on your computer.
Immediately press and hold the D key until Apple Diagnostics begins.
If you previously selected a language for” the computer, a "Checking your Mac" screen will appear in that language.
Can anyone instruct help me? I've tried using 25 times enabling the AHT. But the little icon never shows. I just get the regular login screen after some time.
MacBook Pro early 2011.
OS X 10.9.2

Sweet, OGELTHORPE
That worked! Apple own instructions are really not impressive. Haha. ****.

How to Use DLL Function in Java Applet

Hi all,
I have been assigned a task to develop java applet. The problem is, I need to use DLL functions in my applet to read records. Could you pls anyone guide me how to interface DLL and applet to read records with sample code?
I'm using JDK 1.5.0_06 and Windows XP OS. thanx..
best rgds,
jpdbay

You will need to use Java Native Interface JNI. Ther are many posts on the subject, please search, and this is the documentation:
http://java.sun.com/j2se/1.5.0/docs/guide/jni/spec/jniTOC.html

Air iOS - To use TestFlight Beta Testing, build 1.0.0 must contain the correct beta entitlement.

Hi,
I published my iOS app and uploaded it to iTunes Connect to run an external beta test through Apple TestFlight but I got this error:
To use TestFlight Beta Testing, build 1.0.0 must contain the correct beta entitlement.
I created my certificate 3 days ago and it contains the beta entitlement.
I published the iOS app with the latest Flash CC 2014 version on a Mac with Air 15.
How to fix that error?
Thanks

I'm using flasProfesionnalcc 2014, using Air SDK 16... I have the same problem.
>In summary... I am using Air SDK 16.0 and added the following to my app xml file:
<Entitlements>
<![CDATA[ <key>get-task-allow</key>
<false/>
<key>beta-reports-active</key>
<true/> ]]>
</Entitlements>
But when I try to insert the <Entilements> code into de xml file I receive a error when a try to complile:
Error application.Entilemens is a unexpected element/atribute
How to fix that error?
Thanks

Execution of Coded UI scripts with least possible test execution time in Windows7 Operating system using Visual Studio Test Agent 2010 without VS2010 installed

Hi All,
We are trying to execute coded UI scripts without Visual Studio installed. We are using “Visual Studio Test Agent 2010” for executing coded UI scripts without VS2010 in Windows 7, it is working fine. Also we verified executing the same script with VS2010
Premium, it works fine as well.
Here the challenge we are facing is with the Test execution time.
When we run the coded UI script with IE11-Windows 7 OS-Visual Studio 2010 Premium it takes
3min 36sec to complete the execution whereas with IE11-Windows 7 OS-Visual Studio Test Agent 2010 it takes
6min 40sec for the same script to execute (which is almost double the time it takes while executing using VS2010).
My question is what may be the reason for this difference? and how we can reduce the test execution time when running from Test Agent 2010?
Kindly let us know what is the best practice to execute the coded UI scripts with least test execution time in Windows 7 Operating system using Visual Studio Test Agent 2010 without VS2010
installed.
Looking forward for your positive response.
Thanks in advance..!!

Tina-Shi, Thanks for the information.
As you mentioned, we tried to execute the coded UI test using Mstest.exe in command on VS2010 Premium and checked on the execution
time, there was a slight difference.
Please find below execution time.
Using Mstest.exe in command on VS2010 Premium/Win7 – 3.47 minutes
Using VS2010 Premium/Win7 – 3.53 minutes
Using Test Agent/Win7 – 7.3 minutes
Also, I closed all the other processes in Task manager before starting up the execution.
Still , I am facing the same Issue. Could you please suggest any other way to reduce the scripting time of coded UI script execution
through Test agent 2010.
Looking forward for your earliest response.

Using Loadrunner to test Jinitiator applets

Similar Messages

Maybe you are looking for