Using log and trasfer but pixels become magnified in movement

I have been using final cut pro for a very long time. I usually use XDCAM trasfer to transfer footage from my Sony EX 3 camera. However, I bought a Sony HDR - CX560E (MTS) files and am using Log and transfer. Transfer works fine. Except when i look at the footage the only way i can describe it is like this:
When there is any movement in the frame the pixels become very magnified in some areas. Almost like they are poping. It looks terrible. At first i though it was the project setting, however, when i go to the file on my computer hard drive it is exactly the same that is why i think it might have to do with the way it is imported. Or either recorded. But i dont think it is the way it is recorded because it plays back on the view finder fine. It transfers as Apple ProRes 422. I dont know if it is creating a glitch with the canon plugin.
Recorded at HD Quality
50i
Quality set to highest quality (FX) on camera
i have looked on the forums but dont know what to do now
Final cut Pro 7.0.3

Ok, well i think i have managed to do it which is great. I would much rather do it straight from Final cut and will still try to figure it out. If anyone has any ideas as to why this is happening than please share. I have managed to convert it from toast to ProRes 442 (which is what i am doing in Final cut), However the picture seems fine. It always asks me to render the audio which only takes a few seconds, but i have no idea why i need to render it.

Similar Messages

How to import .MOD files using log and trasfer

I am trying to get some footage taken on my Cannon FS20 into final cut pro
When i mount the camera and go into the SD_VIDEO directory, each clip has 2 files, a .MOD and a .MOI
When I drag these clips into the log and transfer window i get the error
"filename.MOD contains unsupported media or has an invalid directory structure. please chose a folder whose directory structure matches supported media"
How can i fix this?
Thanks

http://www.squared5.com/
http://www.roxio.com/enu/products/toast/default.html?rTrack=mprotoast

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1?

Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk? With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files. If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

Hi jphil and Tom
I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
Folder structure is
AVCHD
     BDMV
          CLIPINF
               .CPI files
          Index.bdm
          Movieobj.bdm
          PLAYLIST
               .MPL file
          STREAM
               .MTS files
AVF_INFO
     3 files (.bnp, .inp, .int)
DCIM
     101MSDCF
          empty
     MODELCFG.IND (file)
My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
I downloaded the latest version of codec updates from the Apple support site but no difference.
Thank you in advance
Giorgio
Freiburg, Germany

Glitches Convertng AVCHD using Log and Transfer

Hi, I'm converting a large batch of AVCHD to ProRes 422 using log and transfer for a project. I've converted almost all the footage, but have had to break down some longer clips because FCP7 won't convert the whole clip, it starts to act wonky. There is one large clip that I'm trying to convert a section of, that just won't convert and keeps giving me the annoying red exclamation point no matter what I do. I've tried changing the scratch disk, using the original name of the clip, unchecking "abort capture on dropped frames," changing the in and out on points--all the suggestions that I've found on discussion boards--nothing has worked. I've considered buying some external software, but am afraid the clip itself might be corrupted, though I've converted other sections of it with no problem. Any suggestions?

Hi Michael, Thanks for the quick response. I copied the clip, the whole card to a different internal drive and FCP crashed when I tried to transfer a section the troublesome clip. Here's part of the report I got after the crash:
Application Specific Information:
*** Terminating app due to uncaught exception 'NSMallocException', reason: '*** -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (75356)'
*** Call stack at first throw:
The camera is the Sony NEX-FS700. As I said before, I'm baffled. I've transferred two other sections from this same clip and also from all the other clips from this card with no problem. It was a couple of months ago, but I've not changed any settings or preferences.

Useful logs and trace files

Hello experts, for our Netweaver AS administration, I am in charge of periodically checking logs and trace files. I would like to know which are the most useful logs and trace files and the information each one will hold. I am familiar with "DefaultTrace.trc", and as of today it is the only one I have used, but I believe I should also be looking at other logs and trace files.
Any suggestions?

Hi Pedro,
If you are talking about JAVA only system defaulttrace is the best log/trace to look, there are other log files like application log, but maybe the best way to check you logs is using NWA (NetWeaver Administrator) on the following URL on your JAVA system:
http://<hostname>:<port>/nwa
From there you need to go to Monitoring -> Logs and Traces and then Predefined View/SAP logs.
My other recommendation is to change the severity level to ERROR for all you JAVA component within the Visual Administrator -> ServeNode -> Services -> Log Configurator -> Locations, otherwise it is possible that you see a lot of garbage on the defaulttraces. Anyway you can change the severity level per component, on demand, to investigate any possible problem.
The work directory is very imporant and maybe you can also check the file "dev_serverX" that also will give you information about any out of memory conditions and garbage collection activity if you have these values set for the server node using the config tool:
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
You can find more information on here:
http://help.sap.com/saphelp_nw70/helpdata/en/ac/e9d8a51c732e42bd0e7de54b9ff4e2/content.htm
Hopefully this help you, let me know if you need more information,
Zareh

Can't Import Sony AVCHD Using Log and Transfer

HI
I have been importing AVCHD footage from all kinds of cameras, mainly Panasonics for over 4 years now using Final Cut Pro 7. I just got a new Sony NEX-EA50 but when I try to import the footage using Log and Transfer, it does not show up. When I try to drop the card folder into the window I get the ""PRIVATE" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." message.
The only way I can import the footage is using Toast, but that is a pain in the *** because it is a hassle to rename and scan the clips before I import.
Does anybody know whats going on? Did Sony purposely change their file directory system so it couldn't be read by FCP?
Thanks in advance.

Hi,
What framerate did you shoot ?
Log and Transfer will not recognise non standard frame rates such as 50 fps or 60fps. Toast, Clipwrap etc is an option but there is another. If you have the Panasonic AVCCAM importer Quicktime plug in, it will allow you to convert to Pro Res through Mpeg Streamclip or Compressor.
DM
Hang on, are you pointing log and transfer at the ROOT folder and not the folders inside.

Cant import using Log and Transfer to FCE 4.0.1 from Panasonic DMC-TZ10

Does anyone know if/how I can import into FCE 4.0.1 using Log and Transfer? I use Log and Transfer with my Sony HDR XR200VE Video Camera but when I try this with the Panasonic DMC-TZ10 I can play the clips in the Log and Transfer Clip viewer however they don't import after I add them to the queue. It just gives me an ! icon and gives up.
I guess I need to know if there is a combination of camera settings and Codecs I can choose that will allow me to successfully import into FCE 4.0.1 using Log and Transfer.
The settings I can choose on the DMC-TZ10 camera are the Rec Mode (Either AVCHD Lite (GPS Rec), AVCHD Lite, or Motion JPEG) and the Rec Quality SH, H or L).
iPhoto 09 and iMovie 09 will automatically import video from this camera if I choose Motion JPEG and H on the DMC-TZ10

Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

Hello jive
I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
regards gins51

Sync Audio using Log and Transfer

Shot footage using Sony Ex-1, recorded audio separately on DAT. There is a Timecode jammed, as well as a clapper. Using Final Cut 6.06.
Can I sync the audio and video before putting them in the bin? Is there a way to sync the audio and video using "Log and Transfer"?
I'm trying to find a way to sync them so that it saves the video and audio as a separate movie file.

You can't sync the files during log and transfer. You have to capture the audio and video seperately, then sync them using a process such as this: http://www.ericbrodeur.com/blog/2008/12/03/syncing-dailies-in-final-cut-pro/

Installed PE12 in June, but haven't used it since. Tried to open using shortcut and program, but nothing happens, help?

Installed PE12 in June, but haven't used it since. Tried to open using shortcut and program, but nothing happens, help?
Should I uninstall and reinstall, and if so does that cause additional problems?

I'm having the same problem. I used it one day and everything was fine...next day, nothing will open. Tried uninstalling and re-installing numerous times but no change. Tried to contact support and they don't support this product (I just purchased it in August). Am VERY disheartened with their customer support.

Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?

Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?

I'm having the same problem. I wish someone could respond with a solution for this! I've paid money for new songs and can't listen to them because of this! WTH APPLE?!?!?!?!

Materialized View - "use log" and its "master table" assigned

Oracle 10 g R2. Here is my script to create a mv, but I noticed two interestes properties by EM
CREATE MATERIALIZED VIEW "BAANDB"."R2_MV"
TABLESPACE "USERS" NOLOGGING STORAGE ( INITIAL 128K) USING INDEX
TABLESPACE "BAANIDX" STORAGE ( INITIAL 256K)
REFRESH FORCE ON COMMIT
ENABLE QUERY REWRITE AS
SELECT CM.ROWID c_rid, PC.ROWID p_rid, CM."T$CWOC", CM."T$EMNO", CM."T$NAMA", CM."T$EDTE", PC."T$PERI", PC."T$QUAN", PC."T$YEAR", PC."T$RGDT"
FROM "TTPPPC235201" PC , "TTCCOM001201" CM
WHERE PC."T$EMNO"(+)=CM."T$EMNO"
In EM, the MV list shows a column - "Can Use Log".
1. What does it mean?
2. Why it only says yes, when I used above codes to create the MV; but says "NO" when I created the MV by "OUT JOIN"? no matter is "LEFT.." or "RIGHT JOIN"
3. I also noticed that there is a column - "master table" and it always shows the name of the last table on the from list. Why? More important, does it matter to process. It shows the same table name when I use the "OUT JOIN" clause in from
I have created mv log on each master table with row_id.

Review the rules for your version of Oracle, you didn't think it important to name it, with respect to when you can do FAST REFRESH and when it can use REFRESH LOGs.

Best way to import MTS (AVCHD)/missing clips using Log and Transfer

My footage (Sony HDR 500) of an average project consists of approximately 10 hours film and 1600 clips. When I use the option Log and Transfer to import in FCE not all clips are imported in FCE. All other clips are consecutively numbered and cannot be compared with the numbering of the clips on the camera anymore. As a result it is, with those large amounts of clips, almost impossible to find out which clips are missing.
Importing takes a very long time (is that normal?) so I would like to run this proces at night, but due to this missing clips problem I am afraid to do this so it is not a good option for me. Does anyone recognize this problem?
To avoid all this I now convert all clips with Voltaic to .mov before importing. At least I know for sure that I have all clips imported, but it is so cumbersome and it takes a lot of time too. This proces I do in steps because I am afraid to start everything at once. After converting the project almost takes 120 GB.
It takes days before everything is imported and that frustrates me. If the same material is imported in Edius for example it only takes an hour (tested) so it appears to be an FCE/Apple problem. Is there any way to accelerate?
I am working with an iMac from 2010, 2,8GHz quadcore i7, 16GB intern geheugen met snow leopard.
I hope someone can help me out.
Thanks, Jacqueline

While I have not seen the exact problem you describe, 1600 clips is a lot of clips to import at once - so is 10 hours of video.
If you are using FCE to Log & Transfer directly from the camera, your clips are automatically being transcoded to QuickTime/Apple Intermediate Codec(AIC) during importing, which explains the long time it takes to ingest the clips.
Also, QT/AIC files are much, much larger than the AVCHD clips in your camera. If you are shooting 1920x1080 video, 10 hours of AVCHD translates into roughly 450GB of QT/AIC clips. It is possible that you may be a) running out of disk space, or b) exceeding the scratch disk minimum allowable free space set in FCE > System Settings. If so, that could explain why not all your clips are being imported - FCE is probably stopping the Log & Transfer process when it hits the disk space limit.
Regarding alternatives, I'm not so sure about Voltaic. The Voltaic documentation says it only supports H.264 in QT/.mov files, and that would not be usable in FCE. Check some of those clips to see what codec they are. I suspect they are H.264. (Also, you referred to the converted clips taking 120GB space, which just happens to match the AVCHD storage capacity of your camera ... and AVCHD is a form of H.264 video, so they take up about the same disk space.)
In order to edit your clips in FCE, they need to be QT/AIC. Two alternatives come to mind - Clipwrap and MPEG Streamclip. Both can convert AVCHD video to QT/AIC, and both support batch conversion. If it were me, I'd consider Clipwrap first, for this volume of material, since Clipwrap was specifically designed for AVCHD.
The reason importing is so much faster in Edius is that it can import & directly edit AVCHD clips; Edius basically just copies the clips from the camera to your hard drive. FCE has to convert the clips to QT/AIC first, before you can edit the video, and that takes considerable time.

Using log and trasfer but pixels become magnified in movement

Similar Messages

Maybe you are looking for