Using logmein to print but colors are wrong

Just purchased a Colorjet CP 2025 and it seems that when I'm using logmein.com and printing, it's not printing out the correct colors. Any help would be appreciated.

Problem solved by using:
pf = job.pageDialog(pf);
Hello,
Where can you set the PageFormat object that is returned by job.pageDialog(pf); ?

Similar Messages

HP LaserJet 200 color M251nw prints, but images are blurred.

Laserjet200 (HP LaserJet 200 color M251nw) prints, but images are blurred; sometimes the entire page and other times just the right half. Staples tech said the drum could be bad. Can this be corrected? Using W7 ultimate OS.

Hi @jimmanning ,
I see by your post that the images are blurred. I would like to help you.
Run a calibration on the printer.
On the printer touch the wrench, system setup, print quality, color calibration calibrate now.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Remove the toner and check to see if there is any toner on drum.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Diagnostics Page and Print Quality Page?
Are you using Genuine HP Toner?
What are the Ink levels?
Was there any damage on the toners?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Photosmart 7200 Colors are Wrong When Printing on Photo Paper

I'm running Windows 7 and am having a problem when printing on photo paper. The colors are off; mainly green. The colors are fine when printing on plain paper. I have tried printing from my computer as well as straight from the media card. Same result. I am also using HP Photo Premium glossy paper. Print cartridges are brand new and are loaded correctly.
Any solutions or troubleshooting tips I can try?

Hi @Vay725,
Welcome to the HP Forums!
I understand that the colors are wrong when printing on photo paper! I am happy to help you with this print quality issue!
For further assistance, I will need to know some more information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you are using Genuine HP Ink cartridges.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

If I wish to print Contacts as a list how do I get the list to be alphabetized. All my contacts print but they are not in alpha order.

Sign out

If I wish to print Contacts as a list how do I get the list to be alphabetized. All my contacts print but they are not in alpha order.-cannot find an answer other than use iCloud which did not work.Tried Safari and Firefox.
What to try?

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

HP D5460 printer. Colors are bad on photo paper.

HP D5460 printer. Colors are bad on photo paper,, OK on plain paper. New genuine HP cartridges. It used to work fine. Have tried aligning print head. Have tried "automatic" and "best" for print quality. Doesn't matter.
Vista 64 bit OS

Besides using genuine HP ink cartridges, check this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&cc=us&dlc=en&lc=en
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Color space-creating a book in My publisher-.when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS -.My Pub is sRGB-.where is the problem?

Color space…creating a book in My publisher….when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS ….My Pub is sRGB….where is the problem?

I finally got to my references. This had to do with "soft proofing" on screen in Photoshop.
So this may not help you at all. Re: Strange sRGB soft-proofing behavior So go ahead and leave that setting at Basic.
However there is a Color Management forum that you also go to and see if anyone has answers for your particular problem.
Here is the link: Color management
I hope they can help you out.
Gene

Good morning. I returned to live in Brazil and I need to use my iPhone4s here but that are blocked by verizon and I will would like to request the unlock of this. Does someone know how to do this?

Good morning. I returned to live in Brazil and I need to use my iPhone4s here but that are blocked by verizon and I will would like to request the unlock of this. Does someone know how to do this?

I don't have my account anymore ttipgem.....

My iPad2 colors are wrong. Has anyone had this problem?

My iPad 2 colors are wrong. Has anyone had this problem?

Could you provide some more details please. Where are the colors wrong? i.e. What application?
As a first pass to fix you could try a reset. Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo. This may take up to around 10 seconds and is the equivalent of a PC re-boot. You will not lose any data.

Hi my case numbers is 30758085. I just try download apps store on my Verizon iPhone 4 but they keep ask me billling payment so I use my credit card but keep said wrong security codes so I check my apple itune balances said I owe itune 22.00 dollars

Hi my case numbers is 30758085. I just try download apps store on my Verizon iPhone 4 but they keep ask me billling payment so I use my credit card but keep said wrong security codes so I check my apple itune balances said I owe itune 22.00 dollars but it not my apps download on my phone I always get free apps Download

Please don't post case numbers or other personal information here. None of us here (who will respond, anyway) work for Apple; we're all just fellow users.
Anyway, as regards the security code issue, this may help:
http://support.apple.com/kb/TS1646
and as regards the balance, first make sure you didn't make any in-app purchases. Many "free" apps, particularly games, have additional levels or features that cost money. Check your purchase history in your iTunes Store account and see what you're being charged for.
Regards.

Print Problems / Colors are off - mixing colors / grainy/ banding

Printer is set up with ICC profile and uses RGB mode. Printed colors are extremely off - tons of white spots / lines / smudge marks in the ink & the colors seems to be mixing. High res images are printing out extremely pixelated.
Using Ricoh sg3110DN printer; subli-jet R inks
If anyone knows what causes any of the following issues, please help. Any input is much appreciated.

The colors being off, in the picture it looks like too much red, sounds like a misconfiguration of the printer and PS regarding color profiles.
I don’t have your printer, or one even remotely similar, so cannot comment on what to click on or what things are called in your printer driver, but typically what you do is, only have PS, or sometimes the printer, handling the color management. If neither is or both are doing color-management then things will be off, because either neither is correcting the colors or both are, when only one should be.
What you should try, first, is to turn off color management in the printer driver, somehow, using the Print Settings button at the top of PS's Print panel, then configure PS-Print to Color Handling to say Photoshop Manages Colors and specify the proper ICC profile into the Printer Profile area . This is probably the ICC you mention in your first sentence, or whatever ICC matches your printer model and specific paper and ink set you’re using.
Another possibility is that your monitor is not profiled and calibrated properly so the printer is showing the real colors and you’ve adjusted your images wrong. I think this is much less likely to be the issue in your photograph.
As for the other spots, lines, marks, I have no idea. Unless your image has noise or your camera sensor is very dirty, this are unlikely to be coming from PS, and may be some printer misconfiguration that is using the wrong amount of ink, or a printer hardware failure.
Message was edited by: ssprengel -- to make it applicable to Photoshop instead of Lightroom

Gradient as a Table Background Works, but Color is Wrong

Hi:
I've created gradients in Web pages as well as in tables in
Web pages, but I can't seem to get it to work properly in WebHelp.
I can get the gradient to display in a table, but the colors are
not right--it is dark blue to black (close to my skin colors?); the
color should have been pale grey to white. I want to put the
gradient in the page header or in the page header table. Either
will work for me. I don't want the whole page to have a gradient,
only the header.
After entering the code in Truecode, after I save the file
and go back and look at the page, the color delimeters are gone!
The rest of the code is there. Weird.
Robohelp keeps everything in the statement up to
"Microsoft.Gradient" and discards the rest consisting of
(endColorstr='#EEEEEE', startColorstr='#FFFFFF',
gradientType='0');" which is what determines the colors. RoboHelp
also as changes the single quotes and adds spaces.
Here is the code I used, after the last !. Any suggestions
would be welcome.
!===!<p>Gradient Table Example</p>
</p>
<table border="1" width="100%" id="table1">
<tr>
<table
style="filter:progid:DXImageTransform.Microsoft.Gradient(endColorstr='#EEEEEE',
startColorstr='#FFFFFF', gradientType='0');"</style
width="1036">
<td>Table is here.
<p> </td>
</tr>
</table>
Regards,
Diana

Hi Diane.
Here's more of a workaround solution... There could be those
more technically savvy than myself willing to chime in.
This could just be RoboHelp TrueCode's special little way of
saying "I don't
think so!"
I'd suggest modifying everything that you need to in WYSIWYG,
generate, and then go to where your HTML files are (that you want
to add the gradients to), and then add the gradient code in
Notepad.
Then don't go back into that file with WYSIWYG in RoboHelp!
Otherwise chances are good that RoboHelp will get its fingers in
there and mess your code up again.

Colors are wrong

I just got the new Mac Mini, and hooking it up to either my TV with a DVI-HDMI adapter, or my samsung 220 monitor, the colors are ok, but specifically the blues look purple. I have tried all the profiles in the color system preference to no avail. I have also calibrated in the color system preference, and adjusted all the monitor settings, but cannot get the color temperature right.

You can take a bitmap capture and see what the pixel values are.

RGB Logo uses Overlay transparency... need in CMYK for print but color changes in overlay

I am working with a logo someone else created in RGB using the Overlay transparency. When I convert it to CMYK just one area seems to "change color".
I tried inserting both versions here - but it isn't working too well. Basically, in the image below the outline of the "scales" appears darker in the CMYK version for printing. Any ideas on how I can adjust it to print in the same vibrant color the RGB is showing?

fill in info RGB is light (like on your screen) and adds more light when mixed, CMYK are pigments and adds more color or multiplies, when mixed

Photosmart 7510 aio - Colors are wrong after changing Magenta Cartridge

Hi,
I have an isue where my 7510 aio printer wont print Yellow and coloer scheme seems all messed up after changing the Magenta Cartridge yesterday.
All other cartridiges was not changed but for some reason the color cheme of the printer is messed up. I tried another Magenta Cartridge but it still seem strange.
When I print out a status report the
- Foto-Color is more brown than black.
- The Magenta looks ok (Very pink)
- Cyan is blue / purple looking
- Yellow is Orange
- Black is ok black.
I tried running a clean and adjust but non of that works.
I tried taking out all cartrigdes and re-inserting them and that wont work either.
Anybody has an idea of what could be wrong and how I can correct it?
Thanks
Jakob

Hello NikDk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having print quality issues. I would like to help with that!
First thing I would suggest, would be a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Second, I would recommend utilizing this document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Using logmein to print but colors are wrong

Similar Messages

Maybe you are looking for