Using mac and pc to send itunes to the same airport Express?

ok heres the deal i have a airport extreme base station and a airport express i am using a g4 power book and a dell p.c.. i have connected to the base a ethernet hub in the the (LAN) slot which has a printer and p.c. hooked up to it and in the (WAN) slot there is a cable modem. My mac an p.c. both connect to internet flawlessly and now i added a airport express to the network and my itunes on the mac finds it no prob. and plays great but the p.c. never gives me the option on the bottom to play AX in the den like the mac i am not trying or looking to play them at the same time but the mac and p.c. contain compleatly differnt music i would like to play at differnt times what am i doing wrong?
Power Book Mac OS X (10.3.9)

It should work. Just to make sure, did you check the option to look for remote speaker in the iTunes preference of you PC? I guess it should not be as easy as this, but we never know. Beside, Could you have a firewall running on your PC?

Similar Messages

Using both the printer and AirTunes on the same Airport Express

Can I use the same AirPort Express to print wirelessly and have AirTunes hooked up to it also. Or would I have to get a separate AirPort for each use.

Yes. There may be a hiccup due to bandwidth use if you print while streaming. But the answer is still yes.
Welcome to Apple Discussions!

I recently deleted a contact from my phone book and when I send a text the same contact appears.. How do I remove it?

I recently deleted a contact from my phone book and when I send a text the same contact appears.. How do I remove it?

I don't believe there's much you can do about it...have a look at the "More Like This" pane on the right side of this page.
One way though to eliminate the issue (although not a very good way) is to restore the phone as new.

Using facetime and ichat on different devices under the same apple account

using facetime and ichat on different devices under the same apple account

Redeem it on any one; it'll be available to the others automatically.
(119212)

Hello, bought a used Mac and I'd like to change the home file name from the previous owner having someone elses name on the home icon is driving me nuts thanks!

Hello - new to mac - bought a used Mac OS X 10.6.8 - I'm set up as admin yet can't seem to remove or edit the home file (john's computer with the home icon). Anyone know how to do this?
Message was edited by: macmom7

Before following these steps, you may wish to back up your important data.
For Mac OS X v10.5 or later
Enable the root user.
Log in as root.
Navigate to the /Users folder.
Select the Home folder with the short name you want to change, and rename it just like you would rename any folder. Keep in mind that the shortname must be all lowercase, with no spaces, and only contain letters.
Use the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier) in System Preferences to create a new user with the Account name or Short Name that you used in the previous step.
Click OK when "A folder in the Users folder already has the name 'account name'. Would you like to use that folder as the Home folder for this user account?" appears. Note: This will correct the ownership of all files in the Home folder, and avoid permissions issues with the contents.
Choose Log Out from the Apple menu.
Log in as the newly created user. You should be able to access all of your original files (on the desktop, in Documents, and in the other folders of this Home).
After verifying that your data is as expected, you can delete the original user account via the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier).
Disable the root user
http://support.apple.com/kb/HT1428

HT4796 Migration assistant is telling me that it has lost connection with my Mac and to ensure they are on the same network. They are, and an ethernet cable is plugged into them. What do i do?

Migration Assistant has been running since yesterday evening. My Dell is now telling me that its trying to reconnect to my Mac and to ensure they are both using the same network. I have an Ethernet cable plugged in them and they are both on the same WiFi. What can I do?

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

HT204074 Use separate Apple ID's for iTunes, on the same pc

Hi,
My partner and I have separate iphones. Do you know how we can use our apple ‘s separately on the same computer?
I plugged his iphone into itunes and it changed/superceded all his settings with mine, without asking for an Apple ID? I then removed the itunes program completely from the computer and replaced with a new download, it went directly into my itunes account, again without asking for an ID?
Kind regards,
Terri

Yes if she has her own user account on the MacBook. One user account can't sync to two separate iCloud accounts.
OT

Can in combine two itunes. my wife and i have seperate itunes on the same pc, can i combine then

My wife and i ahev two user set up our pc. we both have itunes with different content. I would really like to combine them..is this possible

At the moment iTunes accounts cannot be merged or combined. You have both accounts authorised on the same computer's iTunes (Store > Authorise This Computer), but the content from them will continue to be 'owned' by the account that originally bought / downloaded it.

I downloaded the lates version of iTunes. Now, every icon on my desktop now is the iTunes icon and will only launch iTunes. The same is true with almost everything in "All Programs" from my start menu. Uninstalling brought desktop back to normal.

After upgrading to the latest version of iTunes, it changed all desktop icons to the iTunes icon and will only launch iTunes. I uninstalled and reinstalled iTunes and the same problem occured. Help.

Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

Using Internet and taking a phone call at the same time

I have an Apple iPhone 5s. I generally keep the phone o/s up to date. I recently updated to ios8 and now to ios8.2. My problem (experienced recently), since the upgrade to ios8, I cannot take a phone call and use the Internet at the same time. This was possible with the previous os versions. Is the new ios8 the problem and is anyone else with a iPhone 5s experiencing the same or similar problem?

FaceTime is also good. So oddly enough the iPhone gets my voice very well in all situations except when using speakerphone on a phone call at the same time. What could be the cause?
A few months ago when I first got the iPhone on calls it seemed like people could hear me VERY well on speakerphone, but now people more often complain they can't hear me. Frustrating!
Yeah and it's an iPhone 4s on AT&T with full bars.

HT1515 can i hook up a ethernet printer and a usb printer to the same airport express

I want to hook up an ethernet printer and a usb printer to an airport express? Is this possible and how should I set up the airport express?

I have an Airport Extreme, 5th generation, that is hooked to the internet and is the source of my home network. I am replacing an old AXs 801.11g with an 801.11n unit. The need to run a printer on the USB port is because it is an old HP 7400 all in one with a wireless g card. I want to set the network up for all wireless N and 5 Ghz for hopefully faster network speed. It is my understanding that if the network is set that way, the wireless g printer will not be recognized on the network. Since I currently am running a ethernet only Xerox Laser on the ethernet port, I would need to hook the HP using USB inorder to keep it on the network for scanning and such. Thanks to you and your information, I think I have the bases covered. If there is a best way to set up the AXs, or if I am missing something more, I thank you in advance and look forward to your assistance.
Thanks

WRT110 Can't connect MAC and PC to wireless network at the same time.

I installed a WRT110 router on my son-in-law's MAC sometime back and at the time configured it to have the MAC connected via Ethernet. My PC laptop worked fine with it in the wireless mode. Recently we changed the MAC to wireless newtworking and removed the Ehthernet connection. Now if the MAC connects to the wireless network first and then I attempt to connect with my PC laptop the PC cannot find the network and the MAC loses connection. If I shut my PC down the MAC will not find the network until it is put to sleep and reawakened. If the MAC is put to sleep my PC wil immediately find the network. If I first connect my PC and then awaken the MAC both work fine. I've checked all of the router's setup settings and they seem to be OK. I am not MAC savvy and my son-in-law is a neophyte at computers so we are really helpless when something doesn't work. Help will be appreciated.

I tried this setup change after reading another similar post. It didn't help. One thing I had wrong in the first post is that neither computer will connect to the wireless net after we experience the wireless failures until both are turned off, at least that is what happened after making the suggested changes. Is this a WRT110 issue? Seems there are quite a few posts similar to mine.
Bo2

Send emails to the same group of people every day

I use the dock ios mail app and have to send emails to the same eight people everyday.
Is there any easy way to group together email addresses so I don't have to input each one?

Hey zzmama294,
Thanks for the question. I understand that wish to learn more about group messaging. The following resources may provide assist you:
iOS: Understanding group messaging
http://support.apple.com/kb/HT5760
Send a message to a group - Message - iPhone Basics
http://support.apple.com/kb/TI82
Thanks,
Matt M.

Oracle Coherence*Web and BlazeDS: Multiple FlexSessions created for the same HttpSession

Hi all,
I have searched this forum and found a lot of good information from Alex Glosband and others about the infamous "Detected duplicate HTTP - based FlexSessions, generally due to the remote host disabling session cookies. Session coolkies must be enable to manage the client connection correctly." message.
It seems, however, none of the cases are identical to ours. This is ours:
- Resin 3.1.9
- Oracle Coherence 3.7.1 with Coherence*Web (session replication)
With this setup we get the "Detected duplicate HTTP..." message on the first attempt to use BlazeDS and on every subsequent call. The same client and server code works fine in a local sessions setup. With Coherence 3.3 (currently our production environment) it seems to occur less frequently, but still as frequent as it is a major issue for us. It fails even with a single node using in-process distributed caching in our test setup (as well as with multi node out of process caching in our staging environment, for Coherence knowledgeable the resin app server runs with tangosol.coherence.session.localstorage=true in the first case and false in the second).
Both the listener and message broker are mapped as "Coherence aware" in web.xml[1] so that they should use clustered sessions.
We have been digging a bit and we found out that if we commented out lines 427 and 434 of flex.messaging.endpoints.BaseHTTPEndpoint from version 4.0.0.14931 it seems to mask the bug. We added some logging in the setupFlexClient method and it seems that we get more or less a new FlexSession for each and every call - but they have the same cookie and thus underlying HttpSession. I.e. the list returned from flexClient.getFlexSessions() keeps growing. Thus we are not so keen on going to production with that memory leak and the above mentioned ugly hack of commenting out the detection of duplicates.
We use request scope for the remote object, but could in theory use any scope as we do not really have any state on the object itself, it is all HttpSession state and return values that are key (logon is performed prior to doing the first blaze call, in pure forms and ajax, and it is not a timing issue in that regard we are seeing).
Hope someone can shed some light on what can be happening. Is there any "reference testing"[2] or something when the FlexSessions are created that makes them being created as new? Where are they created? We do not know the inner workings of the BlazeDS source, we just watched the call trace of the unwanted invalidation and found that to be line 427 of flex.messaging.endpoints.BaseHTTPEndpoint.
Can we disable FlexSessions? Since the flex and plain html parts of the app share the sessions, we always use FlexContext.getHttpRequest().getSession() anyway, never storing any state directly in the FlexSession or on the remote object. Or maybe there is a config option to help us with this detection (or creation) of multiple FlexSessions?
Cheers and TIA,
-S-
[1] - For instance, this i the message broker servlet def:
<servlet>
<servlet-name>MessageBrokerServlet</servlet-name>
<display-name>MessageBrokerServlet</display-name>
<servlet-class>com.tangosol.coherence.servlet.api22.ServletWrapper</servlet-class>
<init-param>
<param-name>coherence-servlet-class</param-name>
<param-value>flex.messaging.MessageBrokerServlet</param-value>
</init-param>
<init-param>
<param-name>services.configuration.file</param-name>
<param-value>/WEB-INF/flex/services-config.xml</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
[2] - As you undertstand this is speculation based on pure air, but it could be that in Coherence there was a serialization/deserialization happening somehow that would break such a test?

Just a quick update, it seems things are running in a stable fashion (and without visible memory leaks, just keeping the latest FlexSession) with these changes in BaseHTTPEndpoint:
     * Overrides to guard against duplicate HTTP-based sessions for the same FlexClient which will occur if the remote host has disabled session
     * cookies.
     * @see AbstractEndpoint#setupFlexClient(String)
    @Override
    public FlexClient setupFlexClient(String id) {
        log.debug("setupFlexClient start id " + id);
        FlexClient flexClient = super.setupFlexClient(id);
        // Scan for duplicate HTTP-sessions and if found, invalidate them and throw a MessageException.
        // A request attribute is used to deal with batched AMF messages that arrive in a single request by trigger multiple passes through this
        // method.
        boolean duplicateSessionDetected = (FlexContext.getHttpRequest().getAttribute(REQUEST_ATTR_DUPLICATE_SESSION_FLAG) != null);
        if (!duplicateSessionDetected) {
            List<FlexSession> sessions = flexClient.getFlexSessions();
            log.debug("Client has " + sessions.size() + " sessions.");
            int n = sessions.size();
            if (n > 1) {
                int count = 0;
                for (int i = 0; i < n; i++) {
                    if (sessions.get(i) instanceof HttpFlexSession)
                        count++;
                    if (count > 1) {
                        FlexContext.getHttpRequest().setAttribute(REQUEST_ATTR_DUPLICATE_SESSION_FLAG, Boolean.TRUE);
                        duplicateSessionDetected = true;
                        break;
        // If more than one was found, remote host isn't using session cookies. Kill all duplicate sessions and return an error.
        // Simplest to just re-scan the list given that it will be very short, but use an iterator for concurrent modification.
        int i = 0;
        if (duplicateSessionDetected) {
            List<FlexSession> sessions = flexClient.getFlexSessions();
            log.debug("Detected sessions from client: " + sessions);
            for (FlexSession session : sessions) {
                if (session instanceof HttpFlexSession && i < sessions.size()) {
//                    log.debug("----> sessionId: " + session.getId());
//                    Enumeration e1 = session.getAttributeNames();
//                    while (e1.hasMoreElements()) {
//                        Object key = e1.nextElement();
//                        log.debug("--------->" + key + "--------->" + session.getAttribute((String) key));
//                    session.invalidate();
                    flexClient.sessionDestroyed(session);
                i++;
            // Return an error to the client.
//            DuplicateSessionException e = new DuplicateSessionException();
//            e.setMessage(ERR_MSG_DUPLICATE_SESSIONS_DETECTED);
//            throw e;
        return flexClient;
It is not exactly beautiful (to say the least), but if it does the trick I might just be pragmatic enough to go with it... NB: I am of course not proposing this as a patch to this file or anything, it is just an ugly hack for our specific case, but maybe the information can help the BlazeDS team find the root cause making it incompatible with Coherence*Web.
Will give it a test run on our staging servers.

I bought a new mac and my music in itunes didn't transfer over from my old cpu. Most of it was put on with cd's I have. Can I transfer the music from my I-phone to itunes on my mac?

I bought a new mac and my music in itunes didn't transfer over from my old cpu. Most of it was put on with cd's I have. Can I transfer the music from my I-phone to itunes on my mac?

It sounds like there's something amiss with either your ID or the new system you're using. I've been using iTM on a Win7 and OSX SL system and have been able to upload and download to the Cloud on both. I've been using them interchangeably for the last week or so.
I would also recommennd giving Apple support a call, to see what they say.

Using mac and pc to send itunes to the same airport Express?

Similar Messages

Maybe you are looking for