Using mac keyboard on Windows, how to get all CS shortcuts working like on OSX?

Hi!
Firstly, thanks all for any tips/help, it's very much appreciated!
My girlfriend is using a mac at work to design with CS 5. At home she has a windows 7 laptop though.
It seems one of the biggest issues is that the shortcuts aren't working the same, which reduces her productivity so much that it does not make any sense to work from home.
So we still have one of the fancy apple USB keyboards at home and I was wondering if it's possible to get CS working with an apple keyboard under windows so that she can use the same shortcuts which she uses at work with CS5 under OSX?
Thanks for your help in advance!
Thomas

Using a Mac keyboard for the PC won't help. It will probably map the command key to the Windows key. Bob's answer is right on the money. She has to retrain her muscle memory, when at home use control, when at work use command.

Similar Messages

Mac Hard Drive Failure - How to get all info of iphone?

The computer that I sync my iphone to had a complete system drive failure. The drive is toast, nothing recoverable. There is lots of information that I have on my iphone that I now only have on my iphone: mail, contacts, notes, pictures. I want to keep all of this information, but I haven't been able to find a way to get it off the iphone.
If I sync to the fresh OSX install on the computer that failed, or one of my other macs, the iphone gets wiped squeaky clean. I obviously don't want this to occur. Does anyone know a way to create an iphone backup on a computer other than the one the iphone is set to sync to, or is there a way to access the iphone as a disk and copy the information?
Any help would be appreciated.
And yes, I have learned the "backup frequently" lesson.

This is one reason why maintaining a backup is so important. The iPhone does not support disk mode, and is not designed nor intended to be a backup storage device.
If I sync to the fresh OSX install on the computer that failed, or one of my other macs, the iphone gets wiped squeaky clean.
Not true. In regards to iTunes content, an iPhone can be synced or manually managed with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first, but no other content on the iPhone will be touched. Contacts, calendar events, and Safari bookmarks can be synced with the supports applications on multiple computers.
iTunes includes an option to transfer iTunes content that was purchased or downloaded from the iTunes store from an iPod or iPhone, but this is for iTunes content that was purchase or downloaded from the iTunes store only.
With your iPhone connected to iTunes on the Mac you plan on using to sync your iPhone with, first you need to authorize the Mac with your iTunes account with iTunes if your haven't already done so. Without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. If all 3rd party apps do not transfer, you can re-download a 3rd party app with iTunes on the Mac and you won't be charged again for a purchased app as long as you use the same iTunes account to re-download the app that was used to purchase the app originally.
Photos transferred to an iPhone is a one way transfer process only. Photos transferred to an iPhone are optimize for viewing on the iPhone as part of the iTunes sync/transfer process only - the original resolution of these photos is reduced, which is why Apple doesn't transferring these photos in the opposite direction, and why including these photos with your computer's backup is important.
There are some 3rd party apps that support transferring these photos in the opposite direction and if successful, the original resolution of these photos will be lost.
Before syncing contacts with the Address Book and calendar events with iCal on this Mac if there are no contacts in the Address Book and no calendar events in iCal - both are empty, enter one contact in the Address Book and one calendar event in iCal - make these up if needed, which can be deleted later. This will provide a merge prompt when syncing this data, which you want to select.
Backup, backup, bakcup backup, backup, backup.
Did I mention maintaining a backup?

My touch screen isn't working so I can't use my iPad.any ideas how to get the touch screen working again?

My son has done something to his ipad2 and now his touch screen does not work so he can't get from the lock screen as the screen isn't responding to touch. Any idea I can't even switch it off to restart.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

How to get all previous versions page contents of a publishing page using SharePoint Client Object Model 2010

How to get all previous versions page contents and other field values of a publishing page using SharePoint Client Object Model 2010?
Thanks,
Osmita

Hi Osmita,
Greetings.
Here are the links that helps you. It has code attached to it.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a0d2ab40-99ba-4368-8505-1dc559ef6469/get-content-of-previous-version-of-page-sharepoint-2010?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/faaf419f-997e-4150-9911-48cc375c3b46/how-to-get-previous-published-versions-of-publishing-pages-in-sharepoint-2010?forum=sharepointdevelopmentprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

How to get all rows in table to red using alternate rows properties option

How to get all rows in table to red using alternate rows properties option

Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

HT4623 i am unable to backup and sync my iphone since updating because it says i need itunes 11 however it will not install because i need a newer version of mac os, any ideas how to get round this ?

Since updating because it says i need itunes 11 however it will not install because i need a newer version of mac os, any ideas how to get round this ?

Update your Mac OS level.

I use Mac 10.4.11 Can I get back to the last version of foxfire I was using?

I have been using foxfire on my computer for the past few years. Today I was trying to upgrade and when I did, it took off the old foxfire and then told me it could not upgrade. Now I can't get foxfire at all because it is telling me my system is too old. I use Mac 10.4.11 Can I get back to the last version of foxfire I was using?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher (you have version 10.4)
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

New iPod running Mac - I run Windows (how can I convert)

I have just got a new (secondhand for a mate) iPod Classic and it has arrived already loaded with music and TBH I would like to keep it (over 5000 tracks) but the problems is when I plug it into my iTunes account it wants to clear all the music, it is set in a Mac format and I'm running my account through Windows.
question is "Can I convert all the music from a Mac format into Windows and not lose all the music?
Cheers

Hello Rochey30,
And welcome to Apple Discussions!
Not without the help of some third party software such as XPlay or Macdrive. These both come at a cost.
Otherwise, no. Sorry.
B-rock

I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 on a Mac. Anyone know how to get it back?

I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 Anyone know how to get it back?

Sounds like you have the Narrow Options Bar enabled
Photoshop>Preferences>Interface

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get ALL photos off iPhone and into iMac?

I hope I can describe this clearly.
I have close to 1000 photos on my iPhone 5s, all in different albums. I want to get ALL of them off the iPhone and backed up into my iMac so I don't lose them when I upgrade (which has happened before.) The albums I seem to have the biggest problem with are the ones that came over when I went from a PC to a Mac about 2 years ago and were in albums in my Kodak Easy Share. I can't get iPhoto to recognize these photos/albums so I can move them from the iPhone. Honestly, I'm not even sure how I got them from where they originated into my iPhone. I'd thought I'd lost them so when they popped up on my iPhone I refused to even update my phone for a while, I was so afraid to lose them.
I tried using Image Capture and it only recognized 176 photos on the iPhone.
I went into settings on my iPhone, into camera and photos, and saw that iCloud Photo Library (Beta) was "OFF." I clicked "ON" and got the message "Photos synced from iTunes will be removed. Syncing photos via iTunes is not supported when include Photo Library is turned on. 833 photos will be removed."
I hit cancel.
If I connect my iPhone to my Mac, and check off "Sync Photos" it appears that it's going to put photo's in iPhoto on my computer on my phone, so that isn't what I want either. I've tried Googling this, and searching on the Apple site and I can't find anything like this. Similar but not quite the same.
I also read (I think) that the iCloud would delete my photos in 30 days so I'm not sure what the value of backing them up to the iCloud is.
I've used Finder to search Kodak, Easy Share, Kodak Easy Share, in case these photos are somewhere else on the iMac that I'm not aware of, most likely due to user ignorance.
My screen is cracked, I'm going to need to upgrade soon, and I don't want to lose valuable photos again.
Thank you!

Thank you to all for this info. Discouraging, but finally I can stop banging my head on the desk trying to figure out what I'm doing wrong.
I do believe that when I synced my iPhone at some point in the last 2 years, I pulled all the photos OUT of iPhoto and then it deleted them. Which is most likely why the older Kodak photos that I am almost 100% certain were in iPhoto are now gone. How/when they ended up on my iPhone I don't know because I swear they suddenly appeared there a few weeks ago.
Since the old PC is gone (accessible but wiped clean & restored to original factory settings) and Easy Share is no more, I will have to explore outside options to get those photos off the iPhone somewhere. Online photo storage sites have been suggested. Archaic as it is, I wish I'd just put them all on cd's.
Using the info provided, I did SUCCESSFULLY get all 237 photos off of my iPhone 3. (yes, I still have it.) Now I know better and will never ever sync my photo's in iTunes again.
Thank you all again!!
***Addendum: ALL answers helped, but apparently I can't indicate that.

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get this script to work with different browser

Do you guys know how to get this script to work with mozilla firefox?
do shell script "open -a safari 'https://login.binck.nl/klanten/Login.aspx?ReturnUrl=%2fklanten%2fdefault.aspx'"
tell application "Safari"
activate
          tell document 1
                    repeat until ((do JavaScript "location.host") is "login.binck.nl")
                              delay 1
                    end repeat
do JavaScript"document.getElementById('ctl00_Content_Gebruikersnaam').value='sim';document.ge tElementById('ctl00_Content_Wachtwoord').value='password';window.open(document. g etElementById('ctl00_Content_LoginButton').href, '_self', 'true');"
          end tell
end tell
Thank you so much in advance:)

That isn't possible. Firefox's AppleScript dictionary doesn't contain anything which can be used to manage JavaScripts.
(63741)

Using mac keyboard on Windows, how to get all CS shortcuts working like on OSX?

Similar Messages

Maybe you are looking for