Using mac.mail with windows VISTA and outlook

I have a new Toshiba laptop with VISTA and am having problems sending links or messages when not in mac.mail. The setup with windows mail is asking me to provide the names of the "incoming server and "outgoing server which I am unable to identify or find in mac.mail.
Can anyone help me to set this up properly in windows.
thanks

http://docs.info.apple.com/article.html?path=Dotmac/Mail/en/mac14.html

Similar Messages

Hotsync problem with Windows 7 and Outlook 2007

Hello,
I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
- Not Synchronized
Outlook Contacts synchronization failed
When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7.
I hope someone have a solutions for this problem.
Post relates to: Tungsten E2
Post relates to: Tungsten E2

My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007. Did anyone find a way to do this?

Protools 8 compatiblity with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit. I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve. That was also on the XP Operating System so you might be better off with Vista SP1. I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results. USB would definitely be slower and might be a cause for latency if you run into it.
That's my opinion. Digidesign has a pretty in-depth site for making sure your system will run Pro Tools. I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=23954

Using Mac Mail with Exchange problem - Please HELP

When using mac mail with exchange server 2000 when i delete an email from mac mail it doesnt delete it from exchange i know this because when i login to my email from microsoft outlook the mail that i deleted is still there.
i have tried changing the mailbox behaviours in mail preferences to not store deleted messages on the server but this didnt do anything do i need to setup directory access in utilities to get an exchange account to work properly any help would be appreciated as we dont want to have to use microsoft products
many thanks

Are you set up for POP or IMAP? For POP, that's the normal behavior. For IMAP, try making sure you have the synchronize mail folders option selected. The is under Mail->Preferences->Accounts->Advanced.

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

Hi Prabhuram and falez,
This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
~Surendra

I am using a PC with Windows Vista. I've been using iTunes on this computer for over 6 years. Suddenly I can not play any music on iTunes. I tried deleting and reinstalling iTunes however it did not fix the issue. Can anyone please help?

Suddenly, as of two weeks ago, iTunes will no longer play any music. I tried reinstalling but this did not work either. I have a PC with Windows Vista. Has anyone else experienced this problem and fixed it?

Yes, I just tried playing a 10-second mp3 file I acquired from The Oatmeal and didn't once pass my external hard disk. It's a simple, monotone, high-frequency sound, but I get the same results: VLC's UI is still responsive, but its functionality freezes up, i.e. the buttons are still animated, and the menu still works, but there's no sound, the progress bar doesn't move, and the file doesn't play.
Last edited by capidepadua (2012-08-24 05:53:10)

Home Sharing Between Mac and PC with Windows Vista and Wireless Ethernet

Hello.
I want to ask if anyone knows what is the problem.
I have Home Sharing Activated in my two computers and File Sharing Activated too.
My MacBook Pro has iTunes 10 and Snow Leopard all updated and my PC has Windows Vista and iTunes 10.
My MacBook Pro is connected to my network wirelessly and my PC is connected by the Ethernet Cable.
Anyone can help?

since you don't describe the problem in detail, see if something here helps:
what you want to see in iTunes is this (view from my MBP's iTunes seeing the library on my Mini)
if you then click on the house icon, it will change to this and the shared library will load. at that point, two buttons will appear in the lower right corner of the iTunes window, being settings and import
now you should be able to import any content from any shared library by selecting the content and clicking on import.
if the icon looks like this , home sharing has not been set up correctly.
in order for home sharing to work
(a) iTunes on all machines must be authorized for the same iTunes store account
(b) all machines must be on the same network
(c) all machines must have access to the internet.
if none of the above makes a difference, try turning home sharing off on all computers, then turning it back on.
these reads will be useful: one and two.
JGG

Windows Vista and Outlook

Hi to everyone,
I'm new to Windows Vista and I tried to transfer music to my mobile phone. I was told that I couldn't synchronise with my phone cos outlook hadn't been installed correctly. Am I being a plank?

I don't think that we can synchronize music with Outlook or Windows Mail (Vista). So far, we can synchronize music with Windows Media Player or other players that support for it.
What is your phone model? At least, there should be a Vista compatible software for your phone to be used in PC. Check your phone's website.
I sync my phone with Windows Mail because the updated software support for it (Vista). I can see Windows Mail (Contacts) in the updated software.

Windows Vista and Outlook Express 2003 on a Satellite A100-014

Does anyone have the same problem as i am experiencing?
When i try to reply to an email with outlook express on my computer with windows vista home, if the email is originally an html formatted message, hitting the reply button and starting to type up the message will just close down the application.

Hello there! thanks for the reply. of course, i made a mistake, i meant to ask about MICROSOFT OUTLOOK in fact, not outlook express. It sometimes happens that when i hit the reply button, it opens up an error message, that prompts me to the VISTA procedure for resolving mistakes, which often doesn't work. But once it did point me finally to a window telling me that there is no upgrading for that error for MS Outlook for windows vista.
Do you have any advice? you think i should remove and then re-install MS outlook?
THanks agaiN!

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

Hi again,
I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
Thanks a lot. Any suggestion or advice very welcome and appreciated.

I ran into this with Windows7 64 but, could not get the jet 4.0 to work. Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect. I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

I downloaded HP bing bar in my laptop with windows vista and IE9 64 bit Nothing happens

After i downloaded Bing bar and clicked the activation for smart print nothing happens. It shows that the bar and smart print have been downloaded and htey are in the list of add-ons but the bar does not show
On the contrary I have an old desktop with windows XP and IE8 i did the same and the bar and the smart print icon shows and work
What is the problem with the laptop which is the one I use the most and take it with me when I tavel?
Please HELP!!!!!!

Hmmm, can you try reinstalling HP Smart Print using the same document I sent before:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&cc=us&dlc=en&lc=en
1. Expand the + sign next to I have never used HP Smart Web Printing. How do I download HP Smart Print?
2. Follow the instructions under Step one: Download and install HP Smart Print
**Note, I believe this download will install HP Smart Print, but not the Bing bar.
If you want the Bing bar, you can try re-downloading at:
http://www8.hp.com/us/en/partner/microsoft/bing-bar-for-hp/smart-print.html
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Experiences with windows vista and latest FATALITY drive

This post is created? for people to post experiences with windows vista 32 bit and the latest fatality drivers!!?Tks?

I have Fatality FPS edition, and I find that the volume keeps fluxuating in media player?during playback of music?with vista. Anyone have any idea how to fix this?

Cannot sync with Windows Vista and BB 7105t

I was using Windows XP and everything worked great. Now I have Vista and cannot sync. I open the BB Desktop Manager and it says my device is disconnected. I am plugged in to a USB port, tried two different ones and makes no difference. Thus when I go to Synchronize, the Sync or Configure PIM are not available. Also when I just plug into my computer to charge, I get a message "USB charge current is not suffigient. . . . " However, it does charge, just a little more slowly than with my XP computer. Any suggestions?

Hi and welcome to the forums!
Here is what you need to do.
Use this procedure to cleanly uninstall the DM you have loaded:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
Go to here and download Desptop software 4.2.2 without Media manager;
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Cold boot the PC after de-install and :
Install with these Vista condierations:
1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> cd program files\research in motion\blackberry\is71 connectors\ms outlook connector
3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
4. If the registration is successful, the following message displays:
DllRegisterSErver in msoutlookconnector.fil succeeded.
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin.
http://sampath.wordpress.com/2008/03/04/installing-blackberry-desktop-software-on-vista/
Now go to your carriers blackberry software site, get the correct device OS and make sure the app loaded can find it.
Configure the DM and try to sync.
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star
Just check the post that had your answer!
Thanks
Message Edited by Bifocals on 10-17-2008 07:41 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I've overwritten my Mac OS with Windows Vista, how can I get my Mac OS back

I Was downloading a Windows Vista OS on my Mac and I accidentally deleted the Mac OS. How can I get my Mac OS back? Can I use the CD's accompanied with my MAC
when I put the DVD to Install the MAC system from vista...It doesnt give an option for ordinary installtion but it gives me an option for remote installtion (which it needs an network or internet connection or something like that...) what should i do ??
:(:(

You need to repartition the drive. While booted from the DVD, select Utilities > Disk Utility from the menu bar. In Disk Utility, select the boot drive from the list on the left. It will have a long name starting with the capacity in GB. Click on the Partition tab. Choose "1 Partition" as the volume scheme. Click on the Options button near the bottom of the window, then click on the button labeled "GUID Partition Table." Finally, click Apply. When the partition finishes, you can quit Disk Utility and go back to the Installer. You should now see your internal drive as available for installation.

Using mac.mail with windows VISTA and outlook

Similar Messages

Maybe you are looking for