Using mac mini and iphone 4

Hi,
I'd be really grateful if someone could help me with this as its beginning to drive me insane!! I have a mac mini 10.5.8 and an iphone 4 that I would really like to synchronize which I understand I have to do through icloud. But, from what I can see I need to be running Mountain Lion but cannot get that until I have Snow Leopard (which I cannot find where to download through the apple website!). I have upgraded my memory to 4GB which I hope is sufficient but just need someone to give me some instruction on what to do next. Any help really appreciated as I desperately need to synchronise my calendars!!

Hello, since I have no iPhone I was waiting for somebody else to answer, but I can answer it turns out after finally looking!
First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

Similar Messages

Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?

I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
Regards,
Mahendra Panchal.

Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
Toggle how? What are you doing? Why do you have the MacMini connected to the TV? That is the whole point of AppleTV. It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
it becomes an issue.
What does? What is the issue? What specifically fails or does not work?

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

I'm trying to set up Continuity with mac mini and iPhone 5s and not working

I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

Your Mini is not supported.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.

Used Mac Mini and reinstalling OS X

I bought a used Mac mini (late 2009) with mountain lion installed. The previous owner didn't do a factory reset, so I attempted to by using OS X Utilities and reformatting the hard drive. I then attempted to reinstall OS X, but since I'm not the original registered owner, I can't get past the login dialog during the license verification stage. What should I do at this point?
Any suggestions would be greatly appreciated. Thanks!

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

My WRT310n won't work with my Appl Mac Mini and iPhone

Previously I had a weak signal using my WRT54G router. I usually got one or two bars in the house on my iPhone or Mac Mini. I recently "upgraded" to the WRT310N and now I cannot connect wirelessly at all on the mini and only one bar on the iPhone even with the phone inches away from the wireless router. I know these are both G devices, but I didn't expect performance to be worse than with my $49 54G router. Any suggestions?

Are your wireless settings still on auto? Try using the wide radio band with standard channels 1, 6 or 11.
The box said windows xp or better... So I installed Linux!

Remote links between mac mini and iPhone but won't work

My iPhone and mac mini Keynote apps will connect and link but when I try to run a presentation, all I get is a big red exclamation point and a statement the two devices have to be on the same network - which they are. Any suggestions on how to get the remote function to actually work?
Scott

Hi Illaass, thanks for the response, much appreciate you taking the time to reply
I went through the reboot cycles and got as far as the Disk Utility screen. I ran both the Verify Disk and then the Repair Disk processes and in both instances it "eventually) displayed the following respective "red" messages;
1) "The volume Macintosh HD could not be verified completely"
2) "Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files"
So. I tried to reformat the disk. I got the following message
"Volume Erase failed - with the error - Couldn't open disk"
I don't know if this makes any difference but on the left side of the Disk Utility screen (and I wasn't able to actually get into the Mac during the above actions, just the DU screen) it lists the drive details as;
<<drive icon>> 500.11 GB Hitachi HTs5
     Macintosh HD
     indent <CD icon>> Superdrive (grayed out, cant be selected)
then underneath that
<<icon>> disk1
     indent <<icon>> OS X Base System
cheers and thanks again
Chris

Using Mac Mini and a 26" Samsung Tube TV with Apple DVI to Video Adapter

So upon first hooking this adapter up from my Mac Mini to my samsung 27" tube TV, it worked fine–but everything was massive in size. I started changing resolution sizes in the preferences panel and one of them set the screen flickering vertically, like a mismatch in refresh rates.
Anybody else have this issue and resolve it successfully? It obviously works, it was for me for the first couple minutes, but I can't figure out what sent it flickering–and how to resolve it.
The TV is connected VIA composite (RCA) cable from the adapter to the video-in port.

Try starting in Safe mode. That should get your screen back.
http://support.apple.com/kb/HT1455?viewlocale=en_US
See also this article:
http://support.apple.com/kb/TS2213?viewlocale=en_US

I purchased a used Mac Mini and the previous owner did not remove their information. How do I do this?

Operating System is Mavericks and I have no discs, etc. I've tried to add a new admin and delete the old one but everything is asking me for the original password, which I don't have.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Bought Used Mac Mini...need help to change email for updates

Purchased an used Mac Mini and I want to change my defaults to my name and get rid of the sellers name, I also need help in changing the email default for getting my updates from Apple. That's the most important to me... I've got 5 updates waiting and the message I receive is to get my updates from the sellers email address. Thanks!!!

What OS is on your Mini? What year/model is the Mini? The seller should have reinstalled the OS that came with the Mini instead of just selling it to you as is.
Once you determine the OS, you can erase your Mini's Macintosh HD and reinstall the OS which will allow you to setup your own account during the Setup process.

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

IPhone using Mac Mini's internet connection sharing, stops loading webpages

Bought an iPhone 1 hour ago.
I'm sharing my internet connection to my iBook and MacBook from my Mac Mini. Works fine.
Can't connect using the iPhone.
It will detect the network, it will show full network reception, but it will only load webpages for the first 10 seconds and then stops.
Tried removing the password, fixing a channel, resetting the iPhone (full reset), the "forget this network" trick, nothing worked.
It will load web pages in the first 10 seconds of detecting my open network. Its highly frustrating...
Any suggestions? Maybe using the restore option from iTunes instead of the reset ones from iPhone? Will this try to reinstall the latest firmware?

Very similar case here -- I bought an iPhone just yesterday, set it up with internet sharing on my Mac Mini, and am getting random (but frequent) failures connecting via wifi. Small web pages can get through sometimes, large (or complex) web pages almost always hang during loading, e-mail pretty much never works.
However, using "edge" works just fine.
I've nosed around these forums a bit (and googled for this problem a bit), and it does seem like there are a number of users having this sort of trouble. However, some folks with this problem have noted that they can run wifi just fine at other hotspots. (I haven't taken my phone to another hotspot yet, maybe I'll try tomorrow...) And I've shared my internet connection to other PCs from my Mini successfully before. So, in my opinion, this problem does not appear to be an actual hardware fault in either the iPhone or the Mac Mini, but rather some disagreement between the settings chosen on both sides; my guess is that this'll take a driver modification in either or both to fix, rather than a replacement of either the iPhone or the Mini.
Just my current guess, though.
--John

Using mac mini and iphone 4

Similar Messages

Maybe you are looking for