Using Mac mini as an access point for home network

Hi
I'm looking for some help on using my mac mini as an access point on my home network.
I have a G5 tower which is wired in to my router and acts as a home server. It has all my itunes library, films, etc
I stream these to various machines in the house, one of which is a mac mini in our living room.
The mini is connected to the network via powerline adapters meaning the airport is left free.
So i set up internet sharing on the mini via airport so I can use the machine as an access point for the living room.
If I connect another machine to the mini via airport, Internet is working fine but for some reason I can't see the any other machines on the network.
All I see in the sidebar is the mini, not the server.
I've tried it on both mine and my friends macbook but had no luck.
Am I doing this the wrong way?
How would you go about doing this?
Cheers

Internet Sharing may not be providing an address via DHCP, It also may not be providing a subnet Mask that can get you to communicate with the other computers on your local Network.
Take a look at what IP addresses are being used by the various computers on the network. I would expect you have a Router that may be using 192.168.0.1 as its base "private" address, and issuing DHCP Addresses in that range and higher with a subnet mask of 255.255.255.0, meaning anything with the same three high octets can communicate freely without Router intervention.
But what addresses are bing used for the Wireless Shared computer(s)? and what subnet mask?

Similar Messages

Can I use this as a wireless access point for my network

can I use this as a wireless access point for my network

umm... use what?
A Time Capsule? Sure. It's just like many other wireless base stations. It can run in either bridge or route mode - in bridge mode it's just like an access point linking the wired and wireless networks together.

How can I turn mac mini into wifi access point for iPhone?

Hi,
I do not have a wifi router.
I want my iPhone to be able to use my broadband internet instead of the slow EDGE internet.
The simple solution would be to buy a wifi router whih would enable my iPhone to access the wifi home network.
*What if I could turn the mac mini into a wifi access point?* That would save me from the hassle of buying a wifi router.
Any idea how to do this??
Message was edited by: d00by666

I did this.
I think I am doing something wrong. I am doing something wrong in this setting *from ethernet to airport*.
see attached screenshot.
To start Internet sharing on a computer using Mac OS X:
1. Open System Preferences, click Sharing, and then click Internet.
2. Select how you would like to share your Internet connection, and then click Start. You
can choose to share your Internet connection with AirPort-enabled computers,
computers with built-in Ethernet, or both.
Note:
If your Internet connection and your local network use the same port (built-in
Ethernet, for example), contact your ISP before you turn on Internet sharing. In some
cases (if you use a cable modem, for example) you might unintentionally affect the
network settings of other ISP customers, and your ISP might terminate your service to
prevent you from disrupting its network.
3. If you want to share your Internet connection with computers using AirPort, click
AirPort Options to give your network a name and password.
----------------------------------------------------

Using Mac mini as External Hard Drive for time machine

I know this can be done but I am not sure how. How can I set up a mac mini as an external hard drive. Can this be used as a drive for time machine?? Any help is appreciated, Thank you.

Personal file sharing (which may require Leopard on the Mini) or by connecting the Mini to your other Mac via Target Disk Mode. I wouldn't recommend that latter, though; too much chance of inadvertently erasing files critical to the operation of the Mini.

Can i use mac mini as external dvd burner for my ibook?

i was wondering if i could hook up my dad's mac mini to my ibook in target disk mode to my ibook and if that would allow me to use his mac mini as an external dvd burner. if anyone knows if this would work or how to do it, let me know, thanks

Yes and no. You cannot connect the mini to your notebook and use its drive as if it were an external drive. But you can transfer data from your notebook to the mini and then burn the DVD. And, if you can set up a VNC (that's what Leopard screen sharing is) you could even control the mini from your notebook. Not as transparent a process as having an external burner. And, considering the low prices these days, if you really need to burn DVDs rather frequently, buying an inexpensive DVD burner is going to be more convenient.

Mac Mini Snow Leopard "headless" on my home network suddenly responds very slowly.

I run a Mac Mini "headless" (no screen or keyboard) on my home network. It has run perfectly until now. Last week I experimentally tried the newer version of Chicken of the VNC (usual access with Screen Sharing. Since then, responses have become so slow that it is almost unusable although everything else seems to be running fine.
Any ideas?
John Selma

Hi John,
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

Using Mac mini LAN for Xbox 360

Hi,
The Xbox doesn't have a built-in WLAN. What a shame. So I had the idea to use my Mac mini as the WAN-provider for the Xbox via LAN, since my Mac mini is online via WLAN (and Airport Express). Is this possible?
I tried connecting the Mac mini with the Xbox, but it seems like the Mac mini thinks it's a WAN-IN rather than a WAN-OUT. I need the Mac mini to provide WAN access via LAN not look for WAN access. Anyone knows how?
Regards,
Eric.

Thanks mate!
Got it working. Had to do some manual ip/subnetmask/gateway/dns-setup on the Xbox, but then it worked. Seems like the Mac mini is setting up it's on little network when activating the option in Sharing, so for everyone else, make sure to check ip/subnetmask/gateway/dns in the terminal by typing "ifconfig en0" and "dig" (look for the line: SERVER).
Regards,
Eric.
Message was edited by: esreverse

I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need to purchase another copy of Snow Leopard Server?

I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?

The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's

Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's

Your best bet would be to buy a single 2012 MacMini Server model that you can use to manage the balance of the other machines. Either that or upgrade one of the MM's to OS X Yosemite Server . You can find information about the Server edition at:
https://www.apple.com/osx/server/
However I would STRONGLY recommend visiting your local Apple Store and ask to speak to their business specialist, they are trained to manage customer needs such as yours.
The major advantage of using Macs over any PC is the stability of OS X itself and the overall quality of support that you will never get with HP.

Using mac mini nearly for 3yrs. From few weeks i feel electric stock over it surface and on keyboard too. I Tested with current tester it showed electric flow

Using mac mini nearly for 3yrs. From few weeks i feel electric stock over it surface and on keyboard too. I Tested with current tester it showed electric flow

H.Kiran wrote:
Thank First
I just plug it to any plug in my house or my friend house before powering mac mini there is electric stock near power button
I took it to apple care center strangely there i could't feel too much as in my house the service center guy recommend me to go with three pin power cable.
I checked my house ground with technician everything is fine
I have another system (Window pc) plugged to same ups no problem
When i plugged my Apple keyboard to mac mini i feel electric stock but when plugged to pc no electeic stock & i tested it with electric tester
I am asking what the result of testing it with the the tester was.

Bought Used Mac Mini...need help to change email for updates

Purchased an used Mac Mini and I want to change my defaults to my name and get rid of the sellers name, I also need help in changing the email default for getting my updates from Apple. That's the most important to me... I've got 5 updates waiting and the message I receive is to get my updates from the sellers email address. Thanks!!!

What OS is on your Mini? What year/model is the Mini? The seller should have reinstalled the OS that came with the Mini instead of just selling it to you as is.
Once you determine the OS, you can erase your Mini's Macintosh HD and reinstall the OS which will allow you to setup your own account during the Setup process.

Cannot determine MAC address of connected Access Point using Access Connections version 5

I recently installed the newst version of Access Connections (version 5) and discovered I am unable to determine the MAC address of the connected access point. The 'Graphical' screen shows the SSID, IP address of client etc - but does not show the MAC address of the access point. The 'Details' screen shows the MAC address of the access points - but the radial button on the left does not indicate the cfurrently associated access point.

Is it the switch where the node is directly connected ?
Is the NIC at node side, working fine ?
Another fact to consider is, a mac will wipe itself out after the MAC-age timeout.
Parvesh

Used Mac Mini and reinstalling OS X

I bought a used Mac mini (late 2009) with mountain lion installed. The previous owner didn't do a factory reset, so I attempted to by using OS X Utilities and reformatting the hard drive. I then attempted to reinstall OS X, but since I'm not the original registered owner, I can't get past the login dialog during the license verification stage. What should I do at this point?
Any suggestions would be greatly appreciated. Thanks!

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Using Mac mini as an access point for home network

Similar Messages

Maybe you are looking for