Using Mac Mini dvi to vga on an Philips plasma

Hi
I have an Philips plasma tv that dosn´t have an dvi. So I use the vga instead.
But I get the message non supported picture format. Sorry for my bad translation från swedish. The tv is an Philips 42PF9945. Please if any one can help me

If you have a second Mac or a PC at your disposal on the same network as the mini, I suggest you try making a VNC connection between the mini and the second computer. In this manner you can control the mini remotely and make different selections in Display Preferences on the mini from the other computer. Hopefully you will be able to find a resolution that will cause the screen to come to life.

Similar Messages

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini

Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

Cannot use mac mini dvi to composite adaptor with TV

I am having a problem and I am wondering if the adaptor is broken or something.
When I try to hook the mac mini (g4) up to my tv via RCA cable through the adaptor the screen just flickers on the tv, if I adjust the resolution sometimes it flickers less but there is multiples on the screen and it is all black and white and extermely grainy.
I can't see or really make anything out no matter what resolution I try. What is the problem here? Can anyone help?

Hi, I am a newcomer to this discussion but I have the exact same problem so I'd like to see it resolved if possible. Like the original questioner, I am trying to use an old TV (Panasonic circa 1990) with only composite jacks (plus coax of course) as the monitor for a new mac mini. When I bought the mac mini a couple weeks ago, the guy at the store said they didn't stock a DVI to RCA adaptor, but he located one online sold by a company called Sewell, so I ordered it. But it doesn't work, the screen just shows black snow. Even so, it seems something is coming over the line. My only guess is that even though this is the one the Apple guy recommended, it might be the wrong one: the TV end has 3 connectors (red, blue and green) while my TV only has two jacks (yellow and white).
One other thing: how do you adjust the resolution on the mac mini if you can't see the screen?
Any thoughts?

Mini-dvi to vga to YPbPr

Hi. I have an Intel-based Macbook (mini-dvi) and I bought an LCD-TV which has a VGA and a Y/Pb/Pr input. I was planning on using my mini-dvi to vga adapter to connect my mac to my Trutech lcd-tv/monitor. My question is whether it is worth going through all this trouble. With which connection (VGA or Component Video in) will the quality of the image change significantly?
thx

Actually, I bought it on Friday. I knew it was cheap quality because it is a no-name and it is from Target. I bought it for 200 $ so I didn't expect much (Will be used in my college dorm anyways).
This is the one: http://losangeles.craigslist.org/lac/ele/488030589.html
I just want to get the most out of it.
If you recommend me a better one for approx. 200$, I would bring the cheap one back in a second.

Mini-DVI to VGA or Mini DisplayPort to VGA Adapter?

Hi There,
I am so close to purchasing a new Mac Mini that I can almost taste it. When I finally get the Mini, I want to hit the ground running, so I am trying to research everything out so I do have any stupid delays.
With the Mini, I want to use my 17" Apple CRT Studio Display with its 15-pin miniature D-type connector (I'm assuming that this is the typical VGA display connector). When I first started looking into the Mini, I figured that I could use a Mini-DVI to VGA connector and just be done with it. When I looked at the Mac Mini Accessories page that Apple set up, however, Apple says that I need a Mini Display Port to VGA adaptor and doesn't say boo about the Mini DVI adaptor. Doing some cursory Googling lead me to believe that the most current MacBooks and Minis will not support Mini DVI to VGA adaptors. Is this true?
If you were me, if either adaptor can be used, which VGA adaptor would you use? Is one superior over another? Inquiring minds want to know.
Thank you very much in advance for your reply.
Sincerely,
Malcolm Fuller

Personally, I'm using a minidisplayport to vga adapter I had to pay $30 for and it's working great for me and I can't tell the difference in image quality from the minidvi to dvi cable that comes with the mini.
Also, why not get the displayport so you can run 2 monitors at once?
If the displayport doesn't work with your monitor then I would try the mini-dvi version.
But yeah don't be suprised if you have to mess with it to make it work since it seems to work for some like me and not for others:
http://discussions.apple.com/thread.jspa?messageID=9486562&#9486562

Mini DVI to VGA adapter doesn't seem to work

Hi everyone
I am trying to link my Powerbook to my TV using the mini DVI to VGA adapter. I have made the connection and the Mac seems to be detecting the TV display, but the desktop is not appearing on the TV screen. Is there something I need to do with screen resolution settings, for example? The manual sems to suggest that you just plug in the adapter and away you go...
Any ideas gratefully received.

If it is showing the Galaxy image the signal is getting there. you have it set to Extended desktop. Go into the Dispplay section in System Preferences and chnge it to Mirror display, Check Box near the bottom of that window.

Macbook 13" Core 2 Duo, Mini DVI to DVI will not work (Mini DVI to VGA OK)

I've recently purchased a used Macbook 13" with a Mini DVI out display port. When I try to use a Mini DVI to DVI adapter to an Acer X223W (or a few other Acer / Dell models), the Macbook screen either blinks blue to white constantly or doesn't do anything at all. When I use a Mini DVI to VGA adapter, it works fine, however, the MAC does not give an option for my monitors native resolution (1680 x 1050).
At first I thought there was a physical issue with the Mini DVI port, however the VGA adapter works fine. I've also tried a new DVI adapter in case the first one was defective - same results.
Am I missing something here? I don't think there are options to upgrade drivers on a MAC (I'm semi-new to the platform).
Thanks in advance!
Dan

What happens if you try just the monitor, e.g. keep the lid down on the MB? The MB should be attached to it's AC adapter to try this. Also, some kind of USB device will be needed to wake up the closed MB. Pretty much anything hot-plugged into a USB port on the MB will cause it to wake up. Would be curious to know if a DVI monitor works under those conditions.

Mini-DVI to VGA maximum resolution?

I have an external monitor with only VGA input, and it's resolution is 1680 x 1050. Will my MacBook be capable of using this display at it's native resolution using a mini-DVI to VGA adapter?
The display is the HP w2007v in case anyone is interested.
Thanks

Hi Josh,
taken from Apple Video Developer Note found here:
http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/Articles/Video_implementation.html#//apple_ref/doc/uid/TP40003994-SW741200331181
External Display Modes
The default display mode setting on the MacBook is extended desktop display. To toggle between the two modes, press the F7 key, or go to System Preferences>Displays>Arrangement.
A scaling function is available when the internal display and an external monitor are both operating and the mirror mode is selected. However, the external monitor could have black borders during mirroring, depending on the supported timings between the two displays and on the monitor’s selection algorithm. Black borders are not seen on VGA displays.
Both displays show full-sized images when the display resolution for the external monitor is set to the internal display’s native resolution: 1280 by 800. Both displays can operate with other resolution settings, but in mirror mode, one of the displays may be smaller than the full screen and have a black border around it. With the resolution for the external monitor set to less than 1280 by 800, the image on the internal display is smaller than its screen. For resolution settings larger than 1280 by 800, the image on the external monitor is smaller than its screen.
In mirror mode, the maximum size of the external display is 1280 by 800 at 60 Hz. In extended desktop mode, the maximum size of the external display is 1920 by 1200 at 60 Hz.
So in extended mode the 1680x1050 resolution should be avaiable.
Hope it helps
Stefan

Mini-DVI to VGA flicker with Snow Leopard and 2nd monitor

I have a 24" iMac (fall 2007) and recently purchased a 26" Vizio (VMM26F10I) and connected it as a 2bd monitor for my iMac using the Mini-DVI to VGA adapter Apple sells.
The new monitor will flicker now and then and some times will go to no signal. I have to change resolutions to something else and then back to standard setting to get it to come back or unplug adapter and plug back in.
Is there a fix for this?

26" VGA...? Which resolution/frequency? Have you tried a fresh cable with clean connectors, etc....
What did Vizio say when you contacted them with this question about your new purchase?

Mini DVi to VGA colour issues

Hi,
I recently purchased a projector to connect to my macbook. My intension was to use a mini-dvi to vga cable to do this, however when i connected everything up the projected image had a green tint. I must also state that i have connected a TV to the same port with a mini-dvi to s-video adaptor with no problems with the colour.
My first thought was that the cable was the problem, so i borrowed my friends macbook to see if they had the same problem. There where no issues, so if figured it was either a software or hardware issue.
My next step was to boot off the start up disk and plug the projector in, same issue - green tint.
So i have concluded that it is a hardware issue. I know that the mini-dvi port is connected directly to the logic board, if i want to get this fixed will i have to replace the whole logic board or is there another way.
All your help comes much appreciated.
Thanks in advance
Bob

Hi DoDolom,
First, welcome to Macintosh!
Secondly, it sounds to me like what's happened is that OS X has extended your desktop onto a second monitor. Plug in an external mouse and keyboard and then close the MacBook's lid. It will go to sleep. Use the external mouse/keyboard to wake it up and you should be running on just the external display.

Mini DVI to VGA issues w/ LCD HDTV

I have looked all over and I can't find a solution.
I recently purchased an LCD HDTV, Insignia Brand which is a Best Buy Brand, and I bought a DVI cable to hook up to my Powerbook G4 using the Mini DVI to VGA cable. When I hook it up to my tv it works, but the screen on my Powerbook looks magnified as does the LCD TV. When I launch Safari or any other program it doesn't fit on my screen or the LCD TV and I have to resize it.
After I look at displays in system prefernces it says my max resolution is 1024 x 768.
Any help would be appreciated.
Jeremy

Just guessing - the TV's "VGA" input is limited to 1024x768, which is possible although some "VGA" inputs will work higher. Do the instructions mention a limitation like this?
I think if you turn off mirroring on the Powerbook, at least the Powerbook screen will have normal resolution, and the TV 1024x768. The TV apparently scales up image to fill the screen unless using HDMI, where is leaves the extra 342 pixels blank on the sides (1366-1024). Perhaps the TV has a mode for adjusting how the TV handles lesser resolutions (stretch, dot-by-dot, etc)

New Mac Mini / DVI / Apple 17" Studio Display

Greetings all.
I am contemplating purchasing new Mac Mini.
Currently using Mac mini / DVI adapter/ older Apple 17" studio display.
I do not intend monitor change at present.
Question is, which display adapter would allow me to use older DVI adapter/Apple 17" studio display?
Thanks for you time, looking forward to your response.
Regards,
TrevorB

Further exploration, Apple store recommends;
Mini DVI to DVI adapter

Using Mini DVI to VGA adapter on MacBook

I bought the adapter from Apple & hooked up my LCD monitor to the MacBook, but the video I get on the monitor is different that on my laptop. It has an old screen background & the dock but nothing on my desktop shows up. Also, when I'm plugged to the monitor, my dock disappears on the laptop screen. Is there some setting I need to change? It worked fine with my G4 PowerBook.
Thanks for any help....
MacBook Mac OS X (10.4.6)

i use the mini dvi-vga adapter in my classroom almost everyday. It sounds like your new monitor is running as a side by side monitor to your display instead of a "replacement" display.
To get your projector/monitor to basically show whatever is on your macbook screen once you've hooked up press F7....this should make your projector/monitory become your display with your dock & all of your desktop stuff. Your new monitor will completely mirror your display.
THis should do what you're looking for.

Mini DVI to VGA in Mac and Windows XP with Bootcamp

I just bought 13in MacBook the first time so I am new with this system.
I am trying hook up MacBook Mini-DVI output to Panasonic th-42pd25up (EDTV) with VGA input for PC. I hooked it up using Apple's Mini DVI to VGA adapter to TV. (TV also has HDMI input which TV manual says not to use it.
TV's resolution are :
640x480 for 4:3 aspect ratio
852x480 for 16:9 aspect ratio
I have two problems watching streaming video at 300 to 700mbp of soccer or cricket sport broadcasts.
1. In Mac system, I only get blue screen of computer on TV with out any writing or pictures or tool bar.
2. In Microsoft XP using BootCamp I get "no signal" on TV. Would I have success using Parallels software?
I am missing some important games!!!
Thanks for any guidance give me.

MB560 wrote:
1. In Mac system, I only get blue screen of computer on TV with out any writing or pictures or tool bar.
This is normal in extended desktop. You can drag anything you want from the main screen to the external screen. I prefer it this way when I am watching MLB.TV. I keep the game on my external and use my internal work surfing and other stuff.
You can use the F7 key to switch back and forth

Using Mac Mini dvi to vga on an Philips plasma

Similar Messages

Maybe you are looking for