Using Mac & PC for wireless printing?

Many questions to this answer for printing wireless.
1) can my Quicksilver 2002 use a Airport Extreme card? If not what is my other option since I can't find a normal Airport card?
2) I want to get the AirPort Express to print wireless, will I need the AirPort Base Station to do that?
3) I would also like to print with with PC Laptop that has a Intel(R) Pro/wireless 29151A BG Network Connection and the value is set at 802.11b/g
will that work with the AirPort Express or no?
Thank you

Many questions to this answer for printing wireless.
1) can my Quicksilver 2002 use a Airport Extreme
card? If not what is my other option since I can't
find a normal Airport card?
No, the QS2002 uses the original AirPort card. Look at the Linksys WET54G as a good solution, or you may also choose a PCI card, like the Sonnett Aria.
2) I want to get the AirPort Express to print
wireless, will I need the AirPort Base Station to do
that?
The AirPort Express is a base station. Your set-up of the AX will depend on your current networking equipment.
3) I would also like to print with with PC Laptop
that has a Intel(R) Pro/wireless 29151A BG Network
Connection and the value is set at 802.11b/g
will that work with the AirPort Express or no?
It will.
Thank you
You're welcome.

Similar Messages

Using Airport Express for wireless printing and possibly streaming music

I have had the toughest time figuring out this Airport Express. It seems there are so many different ways to set it up. I've tried to read forums but just can't seem to wrap my head around what I need to do. I tried awhile back to join my network wirelessly but was having problems.
I don't really care about extending my current network. My internet service is through Verizon Fios and the router they provided works just fine and don't have any issues with connecting anywhere in the house. I bought the AE to be able to print wirelessly and stream music from my iMac in another room.
So to print wirelessly obviously the printer has to be plugged in to the AE, but does the AE have to be plugged into my router? Or can I have the AE anywhere in the house wherever the printer is? When I print, am I using my existing network or do I have to disconnect a computer from the wireless network and access a 2nd network to be able to print?
My first priority is to print wirelessly. If I can get it to work It'd be cool to stream music from my iMac. Obviously the AE needs to be where the speakers are, but again, does the AE have to plugged in to the router? And again, is this done through my existing network? Or do I have to stream music through a 2nd network? I apologize if i'm asking the same questions that have been asked in previous forums, I just haven't been successful thus far so wanted to see what response or tips I could get. Thanks.
My existing network has "WPA Personal" security set up on it if you need to know that.

but does the AE have to be plugged into my router? Or can I have the AE anywhere in the house wherever the printer is?
If you configure the Express correctly to "join" your FIOS wireless network, you can position it anywhere that it will receive a good, strong wireless signal.
The trick to setting the Express up to "join" is that you must choose exactly the same type of security for the Express as your main router is using. This is tricky when you are using devices from two different manufacturers because they often use different names for the same thing.
For example, when you say that the FIOS is setup to WPA Personal, we really need more information. There's usually a TKIP or AES associated with WPA. You have two choices on the Express for WPA settings, WPA2 Personal or WPA/WPA2 Personal. We can only guess which one might be the correct match for your FIOS network and if you don't choose the right setting, the Express cannot join the network and you have to start the configuration all over again from scratch and try the other setting.
Does your Fios have a setting for WPA2 Personal? Some manufacturers label this WPA2-PSK (AES). Or, maybe you find that your FIOS is using WPA-PSK (TKIP), which is the same thing as Apple WPA/WPA2 Personal. It's confusing. That's why we tell users to choose wireless gear from the same manufacturer. It's much easier when two devices talk the same language.
When I print, am I using my existing network or do I have to disconnect a computer from the wireless network and access a 2nd network to be able to print?
If you have a compatible printer plugged into the USB port on the AirPort Express and have "installed" the printer by setting it up, you will be able to print over your existing wireless network.
First things first. You need to get the Express setup to "join" correctly and get a green light. Then, tackle the printer setup.

Help setting up a Laserjet P1102w for wireless printing on a Mac

I'm trying to setup a Laserjet P1102w on my Mac for wireless printing, but it's not working. It will print fine using USB, but all the documentation for wireless setup is for Windows, not Mac. if I connect the printer via USB to my Mac, how will it get an IP address from my wireless network? Any help appreciated.

Hi Staxofjoy,
Based on the information you provided, and comparing to another post regarding this issue (link below) - It sounds like you are running 10.7 (Lion).
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Laserjet-P1102w-driver-for-Macbook-OS-X-Li...
Please go to the linked thread above, and look for the post by mikel1004 - he outlined the steps for connecting Adhoc to the printer very clearly.
Summary of what you will need to to:
1. Reset Printer to Defaults
2. Connect to printer via Adhoc from your Mac (This will disconnect you from your home wireless network)
3. Access HTML Config, and configure the printer's wireless settings manually from there.
4. Reconnect the Mac to the Home Network
5. Add the printer to the print queue.
Hope this helps
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

Can I use an old UFO Extreme for wireless printing?

Greetings, I have a new airport extreme base station managing my wireless network, but I am still printing wirelessly from a Macbook Pro by sharing a printer with wired a G4 desktop. (my 'main' BS is in the basement, G4 and printer on the 3rd floor, connected to the BS via ethernet). I have an older UFO style base station gathering dust that I'd like to use for wireless printing by having it sit next to the printer and connect to it via usb, join my existing network wirelessly, and, well that's it. Essentially I want it to be an airport express, so I can print wirelessly without the G4. Is this an easy/possible setup? What settings will I have to change on my 'main' airport BS as well as the UFO? Any guidance you can give me I'd very much appreciate. Many thanks in advance, and sorry for what I suspect is a dumb question.

Badlyva, Welcome to the discussion area!
The AirPort Extreme base station (AEBS) can not join a wireless network like the AirPort Express (AX) can. But you could configure your new AEBS to act as a WDS main base station and the old AEBS to act as a WDS remote base station. The bad part is that you would need to use 802.11g and the WDS link would cut your available wireless bandwidth in half of that.

Using a Airport Express Base Station for wireless printing.

Using a Airport Express Base Station for wireless printing. Got a new DSL router yesterday. Our old one we did not have password protected. The new one is. I can't figure out how to get the base station to connect with the new router.

thanks for the reply, I couldn't connect with the base station. The solution (thank you apple genius bar) was to do a soft rest of the unit which allowed and ethernet connectiont to be established. Took the genius bar gy about ten min (and 2 attempts) to get the base station reconfigured. Got home and it worked like a charm. Would have never known what he knew. Thank you genius bar. Thank you for taking time to respond.

Can not connect All in one 209b to new router for wireless printing....

Have an HP laptop and All in one priner 209b. All was working fine, wired and wireless printing. Then we had to upgrade our ATT Uverse router. Everything works...even wireless laptop and printer when connected to laptop. However, can't get printer to printer wireless since it has the old router info. I used the disk but when it asks to you to pick the printer, I choose the printer but it says printer now found ??? what ???? and this is with the cable connected. I do not have the wizard on the touch screen but I did reset to factory settings hoping it would load new router info but it does not. How do you manually enter router into for wireless printing. Is it best to delete the printer and reinstall as new...wired and then wireless ???
I am about to call an outsite company and pay the outrageous charge as the help on HP is not working. Thanks

Try this utility:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP LaserJet Pro P1102w printer "Ready" for wireless printing, but gives "error -- printing" message

This P1102w printer was configured for wireless printing from two computers (WinXP and Win7), both with a network sharing designation, and all functions worked perfectly:
Printing from the WinXP computer directly, and from a networked Win2K computer as a guest.
Printing from the Win7 computer directly, and from a networked Win2K computer as a guest.
Windows Printer Test Pages were printed from both installed computers, showing correct computer names, the printer name, Port names (IP addresses), Data format (IMF), Driver information, etc.
Several days later (after new boots), the WinXP computer showed printer status as being "Ready", along with the correct printer "Type" (HP LaserJet Professional P1102w), "Where" (IP address), and "Comment" (network printing). When a print job was submitted from Microsoft Word, the control-panel printer window first showed the message "printing", and then the message "error -- printing". Nothing was printed. The same results occurred when a print job was sent to the WinXP computer from the networked Win2K computer. HP’s troubleshooting routine did not identify the error, its cause, or what can be done about it.
Successful printing continued, as before, from the Win7 computer directly, and from the networked Win2K computer to the Win7 computer as a guest.
The printer’s blue “i” network indicator lamp is lit, and all three computers continue to communicate through the hub to each other and to the Internet.
HP’s printer installation program was executed on the WinXP computer, using the “fix” option, but nothing changed. The installation program was executed again on the WinXP computer, using the “new install” option (without removing the existing P1102w installation); the “browse” function saw the network, but no printers were found, and the installation could not be completed.
This is very perplexing. Any suggestions?
PS: The same problem occurred once before, and it was fixed by resetting factory defaults on the printer, hard wiring the printer to the WinXP computer through a USB cable, re-installing the printer’s wireless settings from HP’s installation disk, and repeating all of the networking and sharing setups on all three computers. This is a lot of work that is not worth repeating, because the successful results have not been permanent.

To: Neonskeleton,
Thanks for your response -- especially because you are an HP employee!
My Win2k machine does not use HP software, nor communicate to the HP printer. (HP did not write a Win2k driver for the P1102w -- and evidently no one else has done this, either.) My WinXP and Win7 machines use their HP drivers to send print jobs to the P1102w wirelessly, and both machines have the P1102w set up as a shared printer. Then, when I connect to those machines as a "guest" and submit a print job to those machines, those machines receive the print job and then communicate with the printer using the proper installed printer drivers.
Everything worked great with this configuration, until suddenly the printer was no longer responsive to ANY jobs coming from the WinXP machine, even though there was a "printer ready" indication on the WinXP machine, and even though the printer responded perfectly to print jobs coming from the Win7 machine.
When I tried to "fix" the WinXP setup by running HP's setup program on CD, nothing changed. Then, when I tried to reinstall the WinXP setup for wireless printing, the program insisted that I reset THE PRINTER'S factory defaults and proceed using a USB cable -- even though I wanted to simply ADD the computer for wireless communication to an existing networked printer! I would conclude that something screwed up the printer's inner settings (maybe an unsolicited and invisible HP update sent to my printer from the Internet?).
As I mentioned in my original post, I went through this process once before, reinstalled everything on all machines, and all was well. Until THE SAME non-recognition problem surfaced again!
I do not want to spend any more time on this. I went to Staples and bought a second P1102w printer (it is a nice little machine that uses a xerographic cartridge, rather than costly inkjet cartridges that frequently plug up). I'll use a USB cable for the connection, rather than the installed wireless feature, and set up the P1102w as a shared printer. I expect that all of my other computers will be able to link as a "guest" through the wireless hub and be able to print.
Thanks again.
PS. I am a retired computer-systems manager from Northrop Grumman.

HT1443 I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer. How do I find the right item to download?

I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer. How do I find the right item to download?

There is no download; you need to buy a Mac OS X 10.6 DVD.
(83218)

What is the best printer for wireless printing with the iPhone?

What is the best printer for wireless printing witth the iPhone?

Roaminggnome has the list......pick on of those TERRIBLE printers and go for it....
I hope Apple see fit to broaden this list, because, having thrown away several of those brands in my life, I now have a network compatble BROTHER printer that's awesome,
"There's an app for that," ie the BROTHER, but you can only print pictures and soforth.
Apple, step up, open up the list of printers we can use!

Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over

When I use my Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over again. I have to cancel print job on the printer in order to stop it. It works properly on the computer that is directly wired to it, but won't on any other computer that I try to print from. I have had this problem for some time, but now have certain thing that I must print from this printer & can't do it wirelessly. It doesn't seem to be my network, because I can print from all of the other computers onto other wireless printers I have in the office.
Any advice would be appreciated!

Hello,
Thanks for the post. I've attached a link below that may assist. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

I have a hp deskjet 3050 all-in-one printer how can i setup for wireless printing my os is windows7.

how do i setup my hp deskjet 3050 all-in-one printer for wireless printing my operating system is windows7

Unplug the USB cable. Now go to Start > All Programs > Hewlett-Packard > Deskjet 3050 > Add a Device. Run the program and choose Wireless as the installation type.
Follow the directions. It will ask you to connect a USB cable temporarily. Do not connect until it asks and remove it when it tells you.
Finally, when you are done, go to Control Panel > Devices & Printers and delete the USB instance of the printer so you don't get confused when printing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?
I am changing the set up of my home computer to add another computer.
I would like to go wireless from my computers to the hub and wired from the hub to my
printer. I do not think this printer can do that since it does not have the ports to connect to a router hub, I think.
I am rather new to this way of setting up, so any help would be nice.

You could get a wireless router that supports USB printers, but these only support printing, not scanning. You could just go buy a new wireless printer since your printer is pretty old, anyway.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Configure dj 2540 printer for wireless print thru samsung grand (without router)

how to configure dj 2540 printer for wireless print thru samsung glaxy grand mobile (without router)

Hi patede,
Welcome to the HP Support forums. I see that you would like to learn how to set up your Deskjet 2540 printer to be able to print wirelessly from your Android mobile device when you don’t have a router.
I have included the document titled Printing from an Apple or Android Mobile Device with HP Wireless Direct. The document will walk you through setting up the printer and how to print from your Android mobile device. Please note that when you are connected to the printer’s network you will not have access to the internet.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have a macbook with 10.6 os and i can't get my new hp 6600 officejet online for wireless printing.

i have a macbook with 10.6 os and i can't get my new hp 6600 officejet online for wireless printing.

OK, thanks for that.
Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Using Mac & PC for wireless printing?

Similar Messages

Maybe you are looking for