Using Mac to monitor family web traffic rather than A.Extreme

I have two young sons who have various PSP, PS3, Wii and Nintendo DS Consols, which I want to make wireless with my new Airport Extreme. I colleague has told me I can set up a network via my Mac so I can monitor all their internet usage, plus all the websites they go to goes via my Mac and not directly through the AE.
Is this true? If so, how can I set it up.
Many thanks in advance.
Matt

I'm not sure I understand... as far as I can tell, after enabling Family Sharing and my wife and I now having different iCloud accounts on our phones, Photo Stream does not appear to be shared between us any more. It appears that only the "Family Photos" album is shared, and we have to manually add photos and videos to that.
One of my favourite features of sharing the same iCloud account across multiple devices was that Photostream synced all our family's photos across all devices, no matter who took them. This appears to be a missing feature in Family Sharing for now -- perhaps Apple wasn't aware this was something people were doing?

Similar Messages

How do I use my iSight camera through msn messanger rather than iChat?

How do I use my iSight camera through msn messanger rather than iChat?

Hi
MSN for mac any version does not do video.
aMSN and Mercury do video but no audio.
if you are trying to video with a PC you will be better off using Skype
Mac version http://www.skype.com/download/skype/macosx/index.html
PC version http://www.skype.com/download/skype/windows/helloagain.html
Tony

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension ".wmv" at the end of the name. The required extension is ".webarchive" --if I save it this way, i just get a web address rather than the wmv

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension “.wmv” at the end of the name. The required extension is “.webarchive” --if I save it this way, i just get a web address rather than the wmv

Find the URL for the WMV, paste it into Safari's address bar, and press the Option and Enter keys.
(66873)

How do I display external monitor as sole display, rather than mirroring, with lid open?

How do I display external monitor as sole display, rather than mirroring, with lid open?

sudo nvram boot-args="iog=0x0" restart to take effect

New Document button to create/open document in Office Web Apps rather than through Template.doc in client's MS Word

Greetings all,
We have a particular campus with exceptionally limited access on their machines -- essentially, they can browse the web (access our Intranet) but not write information to drives or update their MS Word to read the new DocX format (or install plugins, etc,
to do so).
The new Web Apps seems to provide some potential for alleviating their issue -- but ideally, they would be able to originate (create) new documents right in Sharepoint by clicking on New -> Document and having the new document open in Office Web Apps
rather than downloading / creating through Template.Doc (standard method in Sharepoint).
Any ideas about how to make this kind of functionality happen?
THanks!
---Dave

When you mention "web apps" I assume you're referring to the new "Office web apps" in SharePoint 2010, so I'm not sure why this question is in a pre-sharepoint 2010 forum... My answer entails how to go about doing this in 2010 only.
In the document library's settings, go to advanced settings, and choose for the files to be forced to be opened in the browser, instead of the client software.
By default, you're only going to have a new word document for your "new" button. You'll need to create content types for all the other document types you want them to be able to create. So create a blank spreadsheet, and save it on your desktop,
and create a blank powerpoint too.
Then create new content types at the top level of the site collection. One called Excel Template, and one called PowerPoint template. For each content type, click on the advanced settings and upload that blank file that you created.
In your document library, go to the library's advanced settings and change "allow mgmt of content types" to YES. Then, in the content types section add those 2 new content types you created.
Now, when people click the "new" drop-down, they will have choices of a word document, excel and powerpoint, and they will open in the browser.
Laura Rogers, MCSE, MCTS
SharePoint911: SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/laura
Twitter: WonderLaura
Beginning SharePoint 2010: Building Business Solutions with SharePoint

Wat is the use of sid in extended star schema rather than linking masterdat

hi bw gurus,
wat is the use of sid in extended star schema rather than linking masterdata with dimention tables?
thanx in advace,
i will assign points,
srinivas

hi,
the sid are used instead of the data in order to avoid the redunduncy of data.
and reduce the datastorage size.
the data will be present in the sid table and the data is linked used the corerponding sid in the dimension.
regards

Using Mac email program with Web-based email

I'm wondering if there is a way to use the Mac email program with Web-based email (like Gmail, etc).
If this is possible then how can I set up my system.
Thanks much.

Yes you can use gmail using Mail software.
Following is prosidure:
1)-Login to ur gmail A/s
- Go to settings click Forward POP Settings the click Enable POP and click Save.
2) open mail-POP settings
-Type your Email address, Password,
Incoming server:pop.gmail.com
SMTP server: smtp.gmail.com
Type and give the Bolded server in specified path
and follow the instruction.

Using Proposed Fields - Flat File to DataSource rather than InfoObjects

Hi Experts,
We are doing one test project in which our source data is Flat Files. We want to load into DSO and InfoCube. Then our next step will be MultiProvider and produce reports on MultiProvider. Can you please clarify?
From Flat File to DataSource(PSA) we are using Proposed Fields rather than InfoObjects to Transfer Data.
From DataSource to InfoProvider we are using InfoObjects to Transfer Data.
My question to you is, is it correct to use Proposed Fields rather than InfoObjects from Flat File to DataSource Transfer?
Thank you,
Srini.

Hi, check in Proposal tab, you need to check if the field
types and lengths are correct (If they match the file you have or will receive).In some cases, the proposal will not be accurate, and you will need to adjustthe fields type and length on the fields tab. This is the case with the field length and type.
Thanks
Reddy

Using WRE to send a wireless signal rather than expand a signal

Hi all, I'm hoping you might be able to help me out on this. I have a Linksys router and a WRE. The router does not have wireless, but i was curious if it's possible to trunk the router to the WRE, and have it send out a wireless signal, rather than pick up on and expand an existing signal. If so, what would i have to do to achieve this.
Thanks!

If the router does not have Wireless then you cannot use your Range Expander...In other word's, what you want to establish is not possible with the Range Expander...
However, this is possible with a Wireless Access Point(WAP54G)...You can connect an Access Point(WAP54G) to your router to send a Wireless Signal...

Dock uses icon of first item in folder rather than folder's own icon. Fix??

I have a folder with its own custom icon. When I drag that folder to the right hand end of the dock (mine is set horizontally), Mavericks insists on setting the dock icon for that folder to the icon of the first item (alphabetically) in the folder, rather than the icon for the folder itself. How do I fix this??
Thanks!
DM

Hi William,
Thanks for your reply. It's already displayed as a folder, but this has nothing to do with how the contents are displayed when I click the icon in the Dock. I'm talking about the icon that the Dock shows for my folder. Changing the display options has no effect on that.
If I drag a new, empty folder from the Finder to the Dock, it has the standard OS X folder icon in the dock. But as soon as I drag things into that folder (in the Finder), the dock icon changes to the icon for the first item in the folder. Even if I paste a custom icon into the folder's Get Info window in the Finder, the Dock ignores this and uses the icon for the first item in the folder.
DM

Is it possible to use TCP/IP Monitor with web services?

Hi!
I have created a web service in workshop 10 and deployed it on a WLS10 inside workshop. I have turned on TCP/IP monitoring and in this case it uses port 13458. I have also generated a test client using the clientgen ANT task.
Now I'm using the generated client classes in the following way:
TestWSXSDService service = new TestWSXSDService_Impl ("http://localhost:13458/TestWSXSD/TestWSXSD?WSDL");
TestWSXSD port = service.getTestWSXSDSoapPort();
Apparently the classes retrieves the WSDL file from the server and this request show up on the TCP/IP Monitor.
However, when I finally executes my request:
port.hello(in);
it's apparently using the endpoint information from the retrieved WSDL file and the request goes to port 7001.
This is the request I want to monitor! Is there a way to make this work with the client classes generated by clientgen or must I make my client in some other way in order to keep a fixed end point against the TCP/IP Monitor?
Thank you.
/John
Edited by johnlindgreen at 08/10/2007 4:51 AM

Hi!
I tried to set the suggested properties both on the client and server side, but as far as I can tell they don't wotk with WLS 10. Maybe I'm doing something wrong?
I tried to serach the documentation and found weblogic.webservice.verbose documented for WLS 8 and weblogic.webservice.client.verbose documented for WLS 9. I couldn't find anything for WLS 10.
But then I re-found something about using a proxy server from a client [url http://edocs.bea.com/wls/docs100/webserv/client.html#proxy_server]. This actually does the trick. So now my code looks like this:
               TestWSXSDService service = new TestWSXSDService_Impl ();
               TestWSXSD port = service.getTestWSXSDSoapPort();
          Proxy p = new Proxy(Proxy.Type.HTTP, new InetSocketAddress("localhost", 13458));
          HttpTransportInfo info = new HttpTransportInfo();
          info.setProxy(p);
          ((Stub)port)._setProperty("weblogic.wsee.connection.transportinfo",info);
This keeps the client use my TCP/IP Monitor as endpoint.
/John

Using Mac as a test web server over network.

Hello,
I'm trying to play around with the Joomla CMS. I want it setup on a mac that i have setup as a server in my simple home network.
I have mamp (www.mamp.info) setup on it to easily have an apache and mysql server going.
on the mac, i can easily start up joomla by going http://localhost:8888/joomla/ in a browser.
How would I get to that from another computer through the network? I've tried it's network ip address with no luck.
Please help me out.

You mean you've tried "http:192.168.0.3:8888/joomla" or similar from another computer on the same local LAN?
If so, then is the software firewall enabled on that Mac? And if so, have you opened port 8888 on that Mac? (Sys Prefs | Sharing | Firewall > New, and add a new service that allows unsolicited port 8888 traffic -- or you could turn the Mac firewall off -- probably okay if you have firewall in your broadband modem enabled, and as long as you trust that none of your local machines will get a trojan that attacks another port (e.g., smtp, telnet) someday)

Using JSP based PCR forms in ERP2005 rather than Adobe interactive forms

We are currently upgrading from EP5.0 business package 50 to EP7.0 with ERP2005 (ECC 6.0) and are trying to configure our existing custom personal change request forms with our scenarios.
Originally our custom PCR scenarios where JSP iView and we are hoping to use these again as part of ERP2005. The customisation seems to support this transaction QISESCENARIO for each scenario you have the option Entry Type in Web and you can set it to Entry Using JSP iView. We can configure the internet link and the portal component also for our JSP view.
When we try to run this however we get the exception No Adobe Form Is Assigned to the Scenario. After a quick debug it seems that you always need the Adobe form to be configured.
None of the documentation for ERP2005 suggests that you can use anything other than Adobe forms, which contradicts the configuration in QISESCENARIO.
The ISR cookbook (written July 2004) details the creation and configuration of JSP request forms but not what versions they are compatible with.
Developing you own PCRs for ERP2004 (Cant find an ERP 2005 version) does not mention JSP iViews at all.
The release notes for ERP2005 dont give this a specific mention.
So, my question is are the use of JSP based request forms permitted with ERP2005 ?

Hi Phil,
Interesting - I have a similar issue. We want to use the Request for Transfer scenario in ERP 2005, but it has not been developed in Adobe forms by SAP yet (it isn't available in 2004 either)! So, we have decided to use the old JSP PCRs instead.
Your issue is probably because you're using the same 2005 iviews to create your PCRs. The 2005 PCR iviews are written in WebDynpro, and appear to assume that each one will be an Adobe form! If you assign the old PCR iviews to your manager (give them the old MSS role under Migrated Content->EP5.0... in the pcd if you have it installed), you will be able to create a PCR with the JSP forms (regardless of the "Entry in Web" setting in QISRSCENARIO).
The next issue is the approval. In 2005, transaction SWFVISU has task TS50000075 configured as Java Webdynpro. You'll need to change that to iView, and specify ID = com.sap.pct.hcm.isrdispatcher.default. I'm following the UWL item type guide for this at:
http://help.sap.com/saphelp_nw04s/helpdata/en/b1/cc1357eead454bb144face4a66be7d/content.htm
Having said this, my approval is not working! The item type has clearly changed, because the workitem name is no longer a hyperlink (rather annoying), but when I hit the "Launch Task Page" button (default name I think) I get the error:
"Unable to perform action because the system returned an invalid URL"
I can't see this "invalid url" anywhere in the logs, so I can't see where it is getting it from, or what path, etc I'm meant to put! In your old system, what did you have as the "Server for ISR call" under "Additional Data for Scenario" in QISRSCENARIO? Also, what did you have in the "URL" box that appears under the Additional Data for Scenario button when you change the Entry Type to JSP?
Many thanks,
Russell.

When using 2 printers at 2 locations. Rather than make sure the correct printer is shown when I print is there a way to make one change when I change locations?s there a way to

I have 2 residences each with a printer. When I move from one place to another and try to print I always have to make sure the correct printer is shown in the print window. What can I do to make one change on my MacBook Pro when I change locations so I am not bothered with this nuisance problem?

There was a way from OS9 location manager to set a default printer for any given location. This is not the case in OSX.
You can however, easily change the default printer in Terminal.app with lpoptions -d PRINTERNAME. To view all the printers type lpstat -p. Keep in mind that the name in lpstat -p may be a little different than the name in Printer Setup Utility. You must use the lpstat -p, PRINTERNAME when changing it in Terminal.app. Of course, if the names are the same, you don't need to worry about it.
PowerBook G4 Mac OS X (10.4.9) MacBook Pro

"Save for web" overwrite (rather than a save-as) within an action?

Hello.
I have created an action with the last step being a 'save for web' save.
The action works well with regards to saving the processed image(s) to the folder specified in the save for web dialog when recording the action.
I however now need to use the save for web command and have it overwrite the open image in place (then close it).
I can't see how to do this, is it possible?
Thanks,
Richard.

in your actions palette you have the ability to tag the action to stop during playback and give you the opportunity to change the export variables. Check the box to the left of the export command in your actions setup. That with pause the action during it's run and allow you to make the changes on the fly.
There are also some interesting naming conventions allowed in Bridge that may work well in conjunction with the ability to run Photoshop action commands from Bridge.
If this doesn't do what you want take a screen grab and post it to the list so I can see what your working with.
Brett

Using Mac to monitor family web traffic rather than A.Extreme

Similar Messages

Maybe you are looking for